2005 Bmw X5 Awd 4.4i Panoramic Roof Alloys Loaded Supe on 2040-cars

Auto blog

BMW recalls i8 for stability control problem

The Basics: BMW will recall 16 examples of the 2015 i8 with production dates between May 29, 2015, and June 5, 2015. The Problem: Improperly drilled holes in the dynamic stability control hydraulic unit could restrict the movement of one or more of the part's pistons. This problem could impact the DSC's control over the vehicle's braking. Injuries/Deaths: None reported. The Fix: BMW dealers will check the DSC hydraulic unit and will replace the part if necessary. If You Own One: BMW expects the recall to start February 10. More Information: BMW previously recalled 223 examples of the 2014 i8 for a possible fuel leak. Related Video: RECALL Subject : Impaired Dynamic Stability Control (DSC) Functions Report Receipt Date: DEC 28, 2015 NHTSA Campaign Number: 15V882000 Component(s): ELECTRONIC STABILITY CONTROL Potential Number of Units Affected: 16 All Products Associated with this Recall Vehicle Make Model Model Year(s) BMW I8 2015 Details Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2015 i8 vehicles manufactured May 29, 2015, to June 5, 2015. Improperly drilled holes within the Dynamic Stability Control (DSC) hydraulic unit may restrict one or more pistons impairing the DSC functions, including braking. CONSEQUENCE: Impaired DSC functionality may negatively impact vehicle handling and braking and increase the risk of a crash. REMEDY: BMW will notify owners, and dealers will inspect the DSC hydraulic unit, and replace if necessary, free of charge. The recall is expected to begin February 10, 2016. Owners may contact BMW customer service at 1-800-525-7417. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

BMW i3 gets official worldwide

Even though we recently drove a near-production version of the BMW i3, the car still wore light exterior and interior camouflage. Today, BMW took off that little bit of camo and made a big announcement: The i3 will go on sale in the US for $41,350 in the second quarter of 2014. That does not include any state or federal incentives that could lower the price or the $925 destination fee. The i3 will debut with three trim levels, which BMW is referring to as Worlds: Mega (standard in the US), Giga and Tera.
The BMW i3 is chock-full of new technology afforded by its design as an EV from the start of development, which has resulted in a vehicle layout unique to the i3. BMW has named it LifeDrive architecture, and it features the Life Module and the Drive Module. The Life Module is the i3's pillar-less passenger cell, which is the first mass-produced monocoque made of carbon fiber reinforced plastic (CFRP). The tougher-than-steel material is also 30-percent lighter than aluminum, which contributes to the i3's relatively light weight of 2,700 pounds (preliminary US figure) and, in turn, increases its energy efficiency. Expect more of this technology to find its way into future BMWs.
The Drive Module, a 100-percent aluminum chassis mounted under the Life Module, houses everything that makes the i3 go. It includes the 22-kilowatt, 450-pound lithium ion battery mounted as centrally as possible, and provides power to a rear-mounted electric motor that turns the rear wheels. With 170 horsepower and 184 pound-feet of torque from zero rpm, the single-gear i3 can accelerate from 0-30 miles per hour in 3.5 seconds and 0-60 mph in about 7.0 seconds, but it has a top speed of only 93 mph. BMW says the i3 has a real-world EV range of 80-100 miles, and the standard charger can fill the battery in three hours. Opt for the SAE DC Combo Fast Charger and 30 minutes is all it takes for a full charge; 20 minutes will bump the battery to 80 percent. For customers who have range anxiety, BMW gives them the option to install a 34-hp, 650cc two-cylinder generator as a range extender for the electric drive system.

At meeting with automakers, Trump launches new attack on NAFTA

WASHINGTON — Ten American and foreign automakers went to the White House on Friday to push for a weakening of U.S. fuel efficiency standards through 2025, while President Donald Trump used the occasion to launch a fresh attack on the North American Free Trade Agreement that has benefited the companies. A draft proposal circulated by the U.S. Transportation Department would freeze fuel efficiency requirements at 2020 levels through 2026, rather than allowing them to increase as previously planned. Trump's administration is expected to formally unveil the proposal later this month or in June. "We're working on CAFE standards, environmental controls," Trump told reporters at the top of the meeting, referring to the Corporate Average Fuel Economy standards for cars and light trucks in the United States. Trump said he wants automakers to build more vehicles in the United States and export more vehicles. But much of the hour-long meeting focused on NAFTA. Trump blasted the pact involving the United States, Canada and Mexico as "terrible" and noted that negotiations to make changes sought by his administration were ongoing. "NAFTA has been a horrible, horrible disaster for this country and we'll see if we can make it reasonable," Trump said. Automakers have called NAFTA a success, allowing them to integrate production throughout North America and make production competitive with Asia and Europe, and have noted the increase in auto production over the past two decades with the deal in place. They have warned that changing NAFTA too much could prompt some companies to move production out of the United States. The chief executives of General Motors Co, Ford Motor Co, Fiat Chrysler, along with senior U.S. executives from Toyota Motor Corp, Volkswagen AG, Hyundai Motor Co, Nissan Motor Co, Honda Motor Co , BMW AG and Daimler AG met with Trump, as did the chief executives of two auto trade groups. Major automakers reiterated this week they do not support freezing fuel efficiency requirements but said they want new flexibility and rule changes to address lower gasoline prices and the shift in U.S. consumer preferences to bigger, less fuel-efficient vehicles.