2011 Bmw X3 Xdrive28i on 2040-cars

Auto blog

BMW already considering four cylinders for next M3

The cylinder count in BMW's M3 has fluctuated over the years. The original M3 debuted in 1985 packing a 2.3-liter inline-four, but subsequent models went with sixes until the outgoing generation upped the cylinder count to eight. With its latest model, BMW has dropped back to six cylinders with a pair of turbos taking the place of the extra pistons. But the next M3 sedan and M4 coupe could go back to the model line's roots with a four-cylinder engine.
Speaking with BMW M product manager Carsten Pries at the launch of the latest M3 and M4 in Portugal, our Aussie compatriots at Motoring.com.au report that "you could see a future [M3] powered by a four-cylinder engine." Offsetting the reduction in cylinders, the lighter engine would benefit the vehicle's weight and balance, thus enhancing performance.
We wouldn't expect the next M3 and M4 to lose any power in the process, though: Output in the M3 has only risen over the generations, from 192 horsepower in the four-pot original to 282 hp in the six-cylinder E36, 338 hp in the six-cylinder E46, 414 hp in the V8 E90 and 425 ponies in the new turbocharged six-cylinder F80 model. With that latter model having just debuted, it'll likely be a good six or seven years before the next version comes along, giving BMW plenty of time to settle on an engine - however many cylinders and turbochargers it has. In the meantime, you'll have to forgive us for taking a romp down M3 memory lane in the fresh gallery of images above.

Plug In 2014: BMW i DC Fast Charger is poised to change the EV game

It looks like it's just a blue box on a pole, but BMW's new i DC Fast Charger represents a much bigger deal than just the lowest-cost SAE Combo Charger on the market. BMW sees it as the key to getting more drivers into electric vehicles. As Robert Healey, the EV infrastructure manager for BMW of North America told us, "For [BMW], the future is clear. DC charging really is the future." "DC charging really is the future." – Robert Healey, BMW We spoke with Healey at the Plug-In 2014 conference in San Jose, CA last week about the promise of the new $6,548 DC fast charger. "The strategy is pretty simple," he said. "BMW wants to get as many DC Fast Chargers out there as possible. We're not in the charging business, we're in the EV business and to support the sales of our cars, we have identified some key areas: home charging, public charging and assistant services for EV drivers." That's why the first of the new blue boxes will be installed at the 285 i dealers in the US, many of whom already installed the cables needed for fast charging when they put in the Level 2 chargers, said BMW's Cliff Fietzek, manager of connected eMobility. Even if you haven't gotten a site ready for a DC fast charger, the installation costs for BMW's unit are lower because you don't need to pour concrete (for the wall unit) and the SAE Combo connector plug costs "significantly" less than the competing CHAdeMO plug, Fietzek said. One minor drawback to the BMW DC fast charger compared to the more expensive traditional, full-size DC fast chargers is that the 24kW BMW fast charger allows you to charge to 80 percent full in 30 minutes, while the bigger units can do the job in 20. The good news for EV drivers with SAE Combo cars (which, in the US, means the Chevy Spark EV and the VW e-Golf) is that any driver with a Combo plug car and a ChargePoint card will be able to use the BMW stations. In fact, BMW is talking with both GM and VW on where to install SAE Combo stations in the US so that there is minimal duplication of effort. In other places, BMW is working with other automakers, including Nissan, which uses a competing fast charging standard. "In Great Britain, we are installing triple chargers, the CHAdeMO, SAE Combo and the high-power, three-phase AC that can go up to 43 kW to support the Renault [EVs] and others," Fietzek said.

BMW looking to save billions with cost cuts

BMW is planning a fairly extensive overhaul in a bid to recoup some its annual costs, with CEO Norbert Reithofer (pictured above) aiming to save three to four billion euro ($4 to $5.4 billion) per year to help keep the company's profit margins between eight and 10 percent, while also maintaining investments in production expansion and new tech. BMW's profit margins sat at 9.4 percent in 2013.
According to Automotive News Europe, Reithofer is none too pleased about costs at Mini and on the 1 Series, although neither AN nor its source story, from Germany's Manager Magazin, elaborate on what steps could be taken to improve losses on either project. That makes it hard to figure out just where the fat will be trimmed from.
What may happen, though, is that BMW attempts to trim 100 million euros ($135 million) from its German labor costs each year; a solution hinted at a few weeks ago by Germany newspaper Muenchner Merkur. While a dramatic cost reduction, 100 million euros still doesn't begin to even approach the savings envisioned by Reithofer.