2011 Bmw X3 Awd 4dr Certified Suv 3.0l 8-speed A/t A/c Stunning In And Out! on 2040-cars

Auto blog

BMW exec says public chargers not important for EV success

What has BMW learned from years of electric vehicle test programs and working with Mini E drivers and the ActiveE Electronauts? According to BMW board member Herbert Diess, it's that public charging is not an important piece of the puzzle of making EVs a success. The way those early EV drivers used their vehicles told BMW that, "public infrastructure is not really very important because most people are charging their cars at home," Diess recently told Wards Auto. It's a message we've heard before. Diess' personal experience fits with this conclusion, he said. After driving his company's new i3 city EV for over a year, "not once have I touched public charging." Of course, the i3 does let the driver search for public charging stations and BMW has a partnership with ChargePoint, and Diess is not hinting that BMW is totally against the idea of public charging. Still, Diess' comments are not likely to find a warm welcome with everyone in the EV scene. An August 2012 UCLA study titled "Financial Viability Of Non-Residential Electric Vehicle Charging Stations" (PDF) clearly states: Adoption by consumers will largely be a function of the electric vehicle charging options available. Studies show that most EV charging currently takes place in the home (Carr 2010). Even so, in order for EVs to gain widespread consumer adoption, it is critical for an infrastructure of electric vehicle supply equipment (EVSEs) to exist outside the home. Even BMW's own electric drivers have been sending mixed messages. In 2010, a study of Mini E drivers found that 87.5 percent said a public charging infrastructure is necessary, though 75 percent later said they could manage without such a network.

BMW recalling 40k+ motorcycles to replace rear wheel flange

A problem with the rear wheels on a wide array of its motorcycles has prompted BMW and the National Highway Traffic Safety Administration to issue a recall for 43,426 vehicles. In the affected units, the mounting flange on the rear wheel is at risk of cracking if the bolts are over-tightened. If that flange cracks, "the rear wheel may not remain secured to the motorcycle," which is kind of important considering there are only two wheels on a motorcycle to start with. The recall affects certain model-year 1200 and 1300 models – including the R1200GS, R1200RT, R1200GS, R1200R, R1200S, R1200ST, K1200S, K1200R, K1200R Sport, K1200GT, K1300S, K1300R and K1300GT – as well as the HP2 Megamoto, HP2 Enduro and HP2 Sport. Owners of the affects units can expect to head from the manufacturer to arrange having the aluminum flange replaced with a steel one. Related Video: RECALL Subject : Rear Wheel Mounting Flange may Crack Report Receipt Date: MAR 11, 2015 NHTSA Campaign Number: 15V141000 Component(s): WHEELS Potential Number of Units Affected: 43,426 Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2005-2010 R1200GS and R1200RT, 2006-2010 R1200GS Adventure, 2007-2010 R1200R, 2007 R1200S and K1200R Sport, 2005-2007 R1200ST, 2008-2009 HP2 Megamoto, 2006 HP2 Enduro, 2008-2010 HP2 Sport, 2005-2008 K1200S, 2006-2008 K1200R, K1200GT, 2009-2011 K1300S, 2010-2011 K1300R, and 2009-2010 K1300GT motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened. CONSEQUENCE: If the rear wheel mounting flange cracks, the mounting bolts may loosen and the rear wheel may not remain secured to the motorcycle, causing a loss of stability and increasing the risk of a crash. REMEDY: BMW will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall is expected to begin April 21, 2015. Owners may contact BMW customer service at 1-800-525-7417. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. Featured Gallery BMW HP2 Sport View 13 Photos News Source: National Highway Traffic Safety AdministrationImage Credit: BMW Recalls BMW Motorcycle bmw motorrad

Why are all US-bound BMW i3 EVs with range extenders stuck at port?

The first BMW i3 EVs have been delivered in the US, but in a quirk of the rules, none of them have been the range-extended versions. Long-time BMW electric vehicle driver Tom Moloughney discovered this fact the hard way. His i3 REx has been sitting at a New Jersey port for over a week and he's getting impatient. The problem is something Moloughney calls a "Monroney Hold." So, instead of sitting there fuming, Moloughney did a bit of research and discovered that the problem is something he calls a "Monroney Hold." He says that "the EPA certification has not been completed so BMW doesn't have a Monroney label (window sticker) to post in the window before the car leaves the port, which is required by law. The range extender option changes (shortens) the car's electric range, and also requires an official MPG rating so BMW couldn't use the same Monroney label as they did for the all electric i3." You can read more on his website, but it turns out that the story isn't so simple. For one thing, the EPA testing has been finished. Washington State representative Chad Magendaz told Moloughney that he asked the EPA for an official statement and got the following from Linc Wehrly, Director of the Light-Duty Vehicle Center Compliance Division: "EPA tested the i3 REx and provided the results of that testing to BMW on May 13th. EPA is not aware of anything that would prevent BMW from importing the vehicles since May 13th." Then there's the official word from BMW. Spokesman Dave Buchko told AutoblogGreen that: We are moving as quickly as possible to release the first BMW i3 Range-Extender models to BMW i Centers. Receipt of test data from the EPA is one step, but not the final step, in the process of receiving certification from the EPA. Rules do not permit the release of vehicles for sale until EPA labels are finalized, produced and affixed to any vehicle. Barring any unforeseen delays, we expect that to happen by the end of this week. We have never certified a vehicle like this before. We are taking every precaution to make sure that everything is done in a timely, but more importantly correct manner. In that Monroney labels cannot be produced until the EPA certification process is complete, the characterization [of a "Monroney Hold"] is not technically incorrect, but there is more to it than that, as is often true in life. On a lighter note, BMW donated a loaded i3 to Brad Pitt's Make It Right charity foundation as a fundraiser. Read about that below.