2007 Bmw X3 3.0si~sport Pkg~pano Roof~extra Clean ~tx One Owner~serviced on 2040-cars

Auto blog

2013 Dinan S3 BMW 550i

Steve Dinan has been enhancing BMW models since 1979. But don't throw his company into the ring with the dozen or so other tuners who tweak, tinker and piggyback upgrades on the famed German marque. Dinan is a tuner, but it's also an engineering firm that writes its own software, builds its own parts and then backs everything it does with a factory-grade warranty. That sort of fastidiousness comes at a price, but most of its customers - including the powerhouse of BMW Motorsport - rely on Dinan to help them come out on top.
In stock form, BMW's 550i is a formidable four-door with a twin-turbocharged 4.4-liter V8 rated at 400 horsepower and 450 pound-feet of torque. While those figures allow it to run with quick company (0-60 in 5.0 seconds, according to the automaker), Dinan puts the sedan's kettle on full boil with its S3 package. Starting with the engine, the performance engineering firm bolts on larger turbochargers, air-to-water intercoolers, a trick strut tower brace cold air intake, a quad-pipe free flow exhaust and its own engine management software. Pump in some premium fuel, and the result is 542 horsepower and 587 pound-feet of torque. Power is sent through the stock eight-speed automatic to a limited slip rear differential (Dinan will upgrade xDrive all-wheel drive models, too).
The Dinan S3 also features and extensive suspension upgrade that includes new front camber arms and low compliance rear control arms (engineered to reduce understeer and improve turn-in). The stock dampers are retained, but new bump stops are installed along with new springs. Overall, the car rides about a half-inch lower than stock to improve roll rate. To reduce unsprung weight, forged 20-inch HRE Performance wheels are fitted at all four corners (wearing Michelin Pilot Super Sport tires - 275/35ZR20 up front and 295/35ZR20 in the rear). Lastly, the company remaps the factory Electronic Damper Control (EDC) software with its own Dinan Shockware to work in conjunction with the new enhancements.

18,000 BMW models recalled for potential fuel pump failure

BMW will be recalling over 18,000 vehicles from the 2, 3 and 4 Series families, including vehicles from model years 2014 and 2015, due to potentially bad fuel pumps. The full roster of vehicles includes four- and six-cylinder models of all hardtop 2 Series models, rear-, all-wheel-drive and Gran Turismo versions of the 3 Series, and coupe, convertible, Gran Coupe, rear- and all-wheel-drive 4 Series models. The 3 Series ActiveHybrid is also included in the recall, although the 3 Series diesel line has been left alone. According to the bulletin from the National Highway Traffic Safety Administration, "improper" nickel plating on some of the parts could lead to a failure of the fuel pump, leading to a stall situation. BMW is planning to notify owners and will begin replacing the fuel pumps of affected vehicles at the end of the month. Scroll down for the official NHTSA bulletin, which includes a complete breakdown of individual models affected by the recall. Related Video: Report Receipt Date: MAR 31, 2015 NHTSA Campaign Number: 15V189000 Component(s): FUEL SYSTEM, GASOLINE Potential Number of Units Affected: 18,054 Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America LLC (BMW) is recalling certain model year 2014 228i Coupe, M235i Coupe, 320i, 320xi, 328i, 328xi, 335i, 335xi, ActiveHybrid 3, 328xi Sports Wagon, 428i Coupe, 428xi Coupe, 435i Coupe, 435xi Coupe, 428i Convertible, 428xi Convertible, 435i Convertible, 328xi Gran Turismo, 335xi Gran Turismo, and 2015 428i Gran Coupe, 428xi Gran Coupe, and 435i Gran Coupe vehicles. Improper nickel plating of components within the fuel pump may result in the fuel pump failing. CONSEQUENCE: If the fuel pump fails, the vehicle may stall without warning, increasing the risk of a crash. REMEDY: BMW will notify owners, and dealers will replace the fuel pump, free of charge. The recall is expected to begin April 30, 2015. Owners may contact BMW customer service at 1-800-525-7417. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

BMW i3 qualifies for both green and white HOV stickers in California

BMW buyers tend to have enough cash on hand to be buffered from the concept of "sticker shock," but the term may take on a different meaning when it comes to the German automaker's i3 plug-in vehicle and its classification by California clean-air regulators. The first i3 EVs are set to be sold in May, and some are questioning if the new car will be eligible for the state's white stickers or green High-Occupancy Vehicle lane stickers, both of which allow for solo-occupancy in HOV lanes. California gives out white stickers to some types of battery-electric vehicles, compressed natural gas (CNG) vehicles and hydrogen fuel-cell vehicles, and there's currently no limit on the number that can be given out. The green stickers, which are applied to other battery electrics as well as some plug-in hybrids, are limited (there are currently about 15,000 left) and will likely run out within the next year or two. The i3's status is uncertain because of it has an optional gas-powered range-extender. Jacob Harb, head of electric vehicle operations and strategy for BMW, told AutoblogGreen that it's not all that complicated. The pure electric version of the i3 will get the white sticker, the REx version will get the green sticker. He also said that both will qualify for the $2,500 state incentive in California and the $7,500 federal tax credit available in all 50 states (For what it's worth, Green Car Reports says the REx version will only get $1,500 from California). Read Autoblog's First Drive impressions of the i3 here.