19 To 25 Mpg Navigation Black Leatherette Heated Seats Awd Texas on 2040-cars

Auto blog

BMW adds new entry-level 320i model, priced from $33,445*

Fans of the new BMW 3 Series here in the US have likely been waiting for one of two models to arrive: the new M3 or the diesel-powered 335d. Well... keep waiting just a little bit longer. Here at the Detroit Auto Show, BMW is showing off the new entry-level 320i that will join the 3 Series lineup this spring, and rather than bringing added performance or efficiency, this car is boasting affordability above all. The 320i has been on sale in other markets since the current-generation 3 Series was introduced, but it goes on sale in the US with a starting price of $33,445 (*)including $895 for destination, which is $3,405 less than the current starting price of BMW's well-liked sedan.
In other countries, the 320i uses either a 1.5- or a 2.0-liter inline-four (both turbocharged), and the US version of the car will be getting the latter engine producing 180 horsepower and 200 pound-feet of torque. For comparison, the current 328i, which uses this same engine, produces 240 hp and 255 lb-ft of torque. As expected, performance of the 320i will suffer with BMW estimating a 0-60 mile-per-hour time of 7.1 seconds, but it still has the same 130 mph top speed as the 328i. Oddly enough, despite the lower output, BMW's expected fuel economy for the 320i equipped with rear-wheel-drive and the eight-speed automatic transmission actually matches that of the current 328i with 23 miles per gallon city and 33 mpg highway, and those numbers are actually lower than the 328i with the manual gearbox.
It sounds like most of the usual 3 Series options will be available on the budget-minded 320i, including the choice of xDrive all-wheel drive, BMW Assist and numerous packages including a Sport pack and Premium pack. For a lot more information on the 320i, most of it general information on the F30 3 Series, scroll down for BMW's press release.

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

2014 BMW i3

A Purer Than Ever Sort Of Driving Pleasure
This all started back in 2007 when the megacity urbanization trend hit full stride and BMW began brainstorming the 2020 future of mobility. The product was thus originally called the BMW MegaCity vehicle. Then the 'i' division of BMW was officially born in 2011, and we have since been exposed to various "leaked" images and official prototype unveilings of both this i3 and the i8 eco sports car. The latter (called i12 in the halls of Munich) was originally called the Concept Vision Efficient Dynamics and presented as a diesel-hybrid.
The time is now upon us for the market launch of the plug-in i3 (called i01 internally). The wider motoring public already has its opinions and BMW is listening to all of them, so there's a bundle of nerves around these limited drives of the i3 for a select few members of the media, Autoblog included. We came to an airfield outside of Munich and were handed an i3 test car to drive around a set course filled with blue- and white-striped cones. BMW tech experts were everywhere and some of the discussions around the various technical displays even got a little heated.