08 E60 M5 32k Stick Manual Heated Gps Hud V10 Finance on 2040-cars

Auto blog

As BMW i3 US launch nears, more details discovered

Think of the BMW i3's gas-powered range-extender as akin to driving around with a middle linebacker in the back seat. Except that football player will have a hard time pushing the car 60 miles or so once the battery runs out. Thankfully, he won't prevent you from getting a nifty tax credit either, according to BMWBlog, which isn't affiliated with the company. The i3's front storage compartment is not watertight. Here in the US, where the i3 will be available in short order, BMW will offer an optional i3 plug-in vehicle with a range extender that will have a 1.9-gallon capacity gas tank. That sounds a good deal smaller than the 2.4-gallon tank used in Europe, but the two are actually the same, the US tank is simply limited to the smaller size, Dave Buchko, from BMW's product and technology communications department, told AutoblogGreen. The complete range extender system – including the tank, the engine, and all related hardware – adds about 265 pounds to the 2,634-pound curb weight of the i3 EV and the extra weight in turn adds about a second to the EV's 0-to-60 time of seven seconds flat. Adding the range-extender won't make the US government take any longer to dole out a $7,500 tax credit for the i3, though. We also learned that the i3's front storage compartment is not watertight since it is only meant to hold the mobility kit and the 110-volt charging cord. BMW recently increased its production of the i3 at its German factory from around 70 units a day to about 100 due to better-than-expected demand. Check out our First Drive impressions of the model here.

Next BMW 5 Series hits the 'Ring

Here are our latest photos showing the new BMW 5 Series, codenamed G30, testing at the Nurburgring. Based on the fairy door on the left front fender, we'll take this as the purported PHEV version that we caught last time around on German city streets. According to the insiders at BMW Blog, the 5er hybrid will take heavy inspiration from the X5 xDrive40e, including the 2.0-liter four-cylinder engine with electric assistance and a combined power rating of about 300 horsepower. The lighter CLAR architecture making its way under the 3, 5, 6, and 7 Series models is expected to remove anywhere from 80 to 100 kilograms in the 5, enabling non-US markets to partake of the 150-hp, turbodiesel three-cylinder engine at the entry-level end. However, the engine symphony will run up the scale through four-, six-, and eight-cylinder registers that include a 400-hp M550 diesel and a 600-hp V8 in the M5. The tech story is 'Go Go Gadget G30,' with rumors of autonomous abilities like being able to overtake other cars on its own – and signaling beforehand – and parking itself. Inductive charging through a floor-mounted plate, as shown at this year's Consumer Electronics Show, a new iDrive layout with a touchscreen and gesture-enabled functions, and over-the-air updates are also expected. We could see it revealed at next year's Geneva Motor Show, or maybe the 2016 Auto China, in Beijing, or sooner.

New BMW i3-like Visio.M EV concept uses lightweight resin

It's not a new version of the BMW i3, but an updated version of a lightweight concept car from SABIC, BMW, the Technical University of Munich, Daimler and others does bear a certain resemblance to the well-designed plug-in city car. From the black "glass" in the hatch to the angled line tail lights to the up-and-down window line, you can see a sort of family resemblance (see an i3 comparison photo here). And, of course, they both have an electric powertrain. But the changes made to the new lightweight urban electric concept vehicle is more of an exercise in what's possible rather than a way to evolve the i3 and i8 into a broader i family of vehicles. Even so, what we see here is interesting, since SABIC found all sorts of new ways to take weight out of the car as part of the Visio.M (Visionary Mobility) project, which was first announced in 2012. Let's start with the window material, which as you might guess from the quotation marks above, is not made of glass but is instead SABIC's Lexan polycarbonate (PC) resin plastic. The lower weight (the PC helps shed about 29 pounds) adds two miles of range while the PC resin has better thermal conductivity compared to glass and so does even more because the HVAC system can be more efficient. According to SABIC's computational fluid dynamics analysis, an extra 9-10 miles of range, in fact. Without the battery, this concept weighs just 992 pounds. Remember, BMW already made a lot of weight-reduction measures in the i3 thanks to carbon fiber reinforced plastic, so to make the "glass" lighter would only help boost efficiencies on a production vehicle that uses a resin like this. Read more below. SABIC's LEXAN™ resin delivers weight savings and thermal efficiency for new ultra-lightweight electric car concept developed by BMW-led Visio.M Consortium Munich, October 20, 2014 Today, at the Technical University of Munich (TUM), BMW, Daimler, TUM scientists and a consortium of industry participants showcased a lightweight urban electric concept vehicle with various advances, including an all-plastic design of the car's windows. The windows are made of LEXAN resin, a polycarbonate (PC) material, and coating technologies from SABIC, a leading developer of PC glazing for automotive windows and many other thermoplastic solutions for the automotive industry.