One Florida Owner - 2008 Bmw M3 Coupe - 53k Mi on 2040-cars

Auto blog

The 2016 BMW M4 GTS sounds so good

Critics and those hopelessly in love with the limited-edition, juiced-up 2016 BMW M4 GTS will both concede that water injection isn't a new technology, but it has also never been used on a production car with an intercooler before. It's traditionally been the realm of highly-tuned supercharged piston aircraft engines and some jets, although some pre-intercooler cars used the system as well. All that history sets the scene, but the M4 GTS steals it. Carfection takes a close, loving look at all the little details that set this BMW and its novel water-injection system apart from a typical M4, which it should be noted is no slouch at all. While it's DCT-only, it puts out 493 hp (a full 68 hp more than a normal M4). The example Carfection examines is painted in the available Frozen Dark Grey, with lovely 19- and 20-inch snowflake-style alloys set off in a color known as Acid Orange. Don't miss the startup and revving. The M4 GTS breathes through a titanium exhaust system, and it sounds monumental. As we mentioned in the reveal piece, this is a very limited-production vehicle. 700 will be built, and only 300 will make it to the States – and only 30 in the UK, where Carfection is based. Enjoy the video above.

BMW 1 Series prototype packs direct water injection

Just a few months ago, BMW showcased an M4 that was modified to serve as the safety car for the MotoGP racing series. The flashing lights and emergency equipment, however, weren't the only modifications BMW made to the performance coupe. It also packed an innovative new water injection system. And now it's furthering the development of that system by running it in a 1 Series hatchback as well. Revealed at the BMW Group Innovation Days 2015 event, this five-door 1 Series packs a three-cylinder gasoline engine – like the one found in a Mini or i8 – but fitted with the direct water injection system. In this application, the system sprays a fine mist of water – yep, regular old H2O – right into the combustion chamber. While mixing water with gasoline normally wouldn't be recommended, in this case it evaporates immediately and helps cool the engine from the inside, allowing it to run at higher efficiency. That cooler running engine brings with it several benefits. It delivers improved fuel economy and lower emissions, to start. It also allows for an earlier ignition point, higher compression ratio, and higher boost pressure in turbocharged engines, delivering increased output. It even cuts down on engine knocking (where combustion occurs spontaneously), reduces wear and tear on the engine, and makes better use of lower octane levels. If that sounds like a win-win-win... win (we're losing count of all the wins here), it's because BMW just may be on to something. Of course it does require a water tank to be fitted on board, which means added weight, but instead of requiring the driver fill up the water tank, BMW has fitted this prototype with a system that replenishes the water level from the air conditioning system when the vehicle is switched off. So unless it's being driven in a particularly extreme climate, it doesn't even need topping up. Add one more "win" to the list, then. Extra power, improved real-world fuel economy: Direct water injection enhances efficiency. With direct water injection for turbocharged petrol engines, the BMW Group has again succeeded in enhancing the capabilities of conventional engine technology through an ongoing process of refinement and improvement. The precisely controlled injection of water into the engine cylinders produces a cooling effect that boosts power and torque, particularly when operating at or near full throttle, while at the same time reducing fuel consumption and emissions.

BMW reveals M4 safety car with innovating water injection system [w/video]

Racing series don't just pick their safety cars at random, or use just whatever car is lying around. These days the car that sets the pace at the front of the pack is typically provided through consideration by a sponsor. In the MotoGP series, that's BMW and its M division, which have served up the Official Car of MotoGP since 1999. What you're looking at is the latest, and it packs some innovative technology on board. Aside from the matte black wrap with BMW's iconic striped livery, upgraded aero kit, retrofitted interior and emergency equipment, this BMW M4 coupe packs a new injection system under the hood. Only instead of injecting fuel, it injects water into the combustion chamber – something that wouldn't usually be recommended, but BMW insists actually aids in the combustion process. The idea is that the temperature of the air being mixed with the fuel inside the engine is usually hotter than ideal, so the system injects a fine mist of water into the collector in order to reduce the air's temperature... sort of like one of those hydrating misters at an amusement park or outdoor mall, but in an even hotter environment. The system brings the temperature of the air down to a more optimal temperature, helping it combust better. The process is said to yield a number of positive effects. For one, it reduces knocking. For another, it can make more out of lower-octane fuel where higher octane isn't available. It also can control the adverse effects of higher ambient temperature on the combustion process. But most of all, it increases output and reduce fuel consumption by around eight percent. Whether that eight percent is worth the added weight of the system – particularly with water pump and a 1.3-gallon tank in the trunk – is up for debate. But we'd imagine that the Bavarian engineers have weighed very carefully. Of course there's also the matter of refilling the water tank, which BMW says would be carried out whenever the safety car is refueled, but in real-world conditions would only necessitate attention once every five top-ups at the gas station. By now you might have guessed that BMW probably didn't develop this system just for the MotoGP safety car, and isn't planning on keeping it confined to the racetrack. Instead it's being tested and demonstrated on the safety car before being rolled out on production models in the future.