Bmw 7-series Limo on 2040-cars

Auto blog

BMW working on 2 Series Active Hybrid Tourer

The cover may have officially been pulled off the BMW 2 Series Active Tourer at the Geneva Motor Show, but BMW has apparently continued working on other variants behind closed doors. While at first glance this prototype looks like any other Active Tourer, the "Hybrid Test Vehicle" stickers on the passenger door and rear bumper give it away as something a little different.
Details about the hybrid Active Tourer are somewhat sketchy at the moment, but BMW indicated its likely direction for the electrified hatchback in the earlier Concept Active Tourer. It used a hybridized 1.5-liter turbocharged three-cylinder engine coupled with an electric motor with a total system output of 190 horsepower and 147 pound-feet of torque. The company claimed that it had a roughly 19-mile electric range and could hit 62 miles per hour in under 8 seconds. However, the Bavarian automaker hasn't said yet whether this powertrain would be used in the production version.
The internal combustion 2 Series Active Tourer is rumored to come to the US in 2015. Given the nearly complete look of the test car, the hybrid might not be too far behind.

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

BMW says current M3 sold out, no new AWD M models planned

Car and Driver asked the head of BMW M, Friedrich Nitschke, a few questions about what the go-fast division had in mind for the future, and was rewarded with some enlightening answers. The best news to purist ears is that Nitschke said customers don't want all-wheel drive on their M cars, so it's the rear wheels alone that will propel new product into the future. If you want both an M badge and four driven wheels, it's the X5 M, X6 M and M Performance models you're looking for in the catalog.
"Mixed bag" is the phrase you're looking for regarding the other answers. Nitschke said that future M engines "at the core of their architecture" would "be closer to BMW AG engines" that are optimized for M cars, instead of following in the line of unique marvels like the V10 and naturally aspirated V8. They will keep the high redlines, however, with Nitschke saying "there is room beyond" the 7,000 rpm mark in BMW's current V8 turbos.
Managing weight will keep the same priority for M that it is for every other brand, so electrically assisted power steering is coming, as is an "unconventional" materials mix. At the smaller end of the M scale, Nitschke described three-cylinder engines as "attractive," saying that the brand can produce more than 310 horsepower from a three-pot.