100000 Mile Warranty Panoramic Roof Freshly Serviced Needs Nothing on 2040-cars

Auto blog

BMW 1 Series prototype packs direct water injection

Just a few months ago, BMW showcased an M4 that was modified to serve as the safety car for the MotoGP racing series. The flashing lights and emergency equipment, however, weren't the only modifications BMW made to the performance coupe. It also packed an innovative new water injection system. And now it's furthering the development of that system by running it in a 1 Series hatchback as well. Revealed at the BMW Group Innovation Days 2015 event, this five-door 1 Series packs a three-cylinder gasoline engine – like the one found in a Mini or i8 – but fitted with the direct water injection system. In this application, the system sprays a fine mist of water – yep, regular old H2O – right into the combustion chamber. While mixing water with gasoline normally wouldn't be recommended, in this case it evaporates immediately and helps cool the engine from the inside, allowing it to run at higher efficiency. That cooler running engine brings with it several benefits. It delivers improved fuel economy and lower emissions, to start. It also allows for an earlier ignition point, higher compression ratio, and higher boost pressure in turbocharged engines, delivering increased output. It even cuts down on engine knocking (where combustion occurs spontaneously), reduces wear and tear on the engine, and makes better use of lower octane levels. If that sounds like a win-win-win... win (we're losing count of all the wins here), it's because BMW just may be on to something. Of course it does require a water tank to be fitted on board, which means added weight, but instead of requiring the driver fill up the water tank, BMW has fitted this prototype with a system that replenishes the water level from the air conditioning system when the vehicle is switched off. So unless it's being driven in a particularly extreme climate, it doesn't even need topping up. Add one more "win" to the list, then. Extra power, improved real-world fuel economy: Direct water injection enhances efficiency. With direct water injection for turbocharged petrol engines, the BMW Group has again succeeded in enhancing the capabilities of conventional engine technology through an ongoing process of refinement and improvement. The precisely controlled injection of water into the engine cylinders produces a cooling effect that boosts power and torque, particularly when operating at or near full throttle, while at the same time reducing fuel consumption and emissions.

BMW 2 Series Coupe priced from $33,025* ahead of Detroit debut

BMW is definitely going to have its hands full at next month's Detroit Auto Show. The big news might be the debut of the M3 and M4, which were previewed in our Deep Dive, but joining those performance cars under the bright lights will be the all-new 2015 BMW 2 Series Coupe.
While we already know most of the details about the 2 Series and its available M Performance parts, BMW has now announced that the Coupe will go on sale in the first quarter of next year with a starting price of $33,025 (*plus $925 for destination) for the base 228i. This price is about $1,500 more than the current 1 Series Coupe, which starts at $31,500, while the M235i's starting price of $44,025 is almost $500 more than the existing 135is Coupe. There is still no indication as to when we'll see 2 Series Convertible unveiled.
In addition to new M cars and the 2 Series, BMW's display will also reveal another new color-theme package for the Z4. Last year we saw the Hyper Orange package, and this year will give us the Ivory White Burnt Sienna Z4 available in an exclusive Sparkling Brown Metallic exterior paint color. Scroll down for the full press release of production vehicles BMW has planned to showcase at Detroit's Cobo Hall next month.

BMW previews new M6 GT3 racing prototype [UPDATE]

UPDATE: A previous version of this post specified the incorrect weight target for the M6 GT3. The text below has been updated with the correct information. BMW may not compete at the top level at Le Mans or in the World Rally Championship, it may have withdrawn from Formula One and shuttered the Formula BMW series, but it's not without its racing programs. Aside from the Minis that dominate the Dakar Rally, BMW fields the M4 in DTM, the M235i Racing in the BMW Sports Trophy and the Z4 in GT3 competitions around the world. But now it's preparing to launch a new GT3 racer based on the M6. Currently undergoing development, BMW has presented its new M6 GT3 prototype at its factory in Dingolfing, Germany. Based on the road-going M6 coupe, the GT3 retains its 4.4-liter twin-turbo V8 engine with dry-sump lubrication, producing over 500 horsepower – which is actually less than the road-going model you can buy, but has to be restricted to meet FIA certification. At less than 3,000 pounds, it is a fair bit lighter than the production version, and promises to deliver blistering performance figures to whichever privateer teams buy one to enter in racing series around the world. The M6 GT3 is slated to hit the circuits next year, when it will join the lineup alongside the M6 coupe, M6 convertible and M6 Gran Coupe, to say nothing of the M6 safety car used in MotoGP. In a related development, BMW Blog reports that the Bavarian automaker is probing potential interest in bringing the M235i Racing to North America. The entry-level model in the BMW Motorsports range, the M235i Racing sells in Europe for the equivalent of $68,000. The next milestone: the BMW M6 GT3 is rolled out at the BMW premises in Dingolfing. 05.02.2015 Munich (DE), 5th February 2015. BMW's new figurehead for the GT racing scene has been given its first run: last Saturday, the test track on the premises of the BMW factory in Dingolfing (DE) provided the stage for the roll-out of the BMW M6 GT3, with which BMW teams will compete in national and international series, as well as at iconic endurance races, from 2016 onwards. The car left the garage for the first time at precisely 14:00 with Jorg Muller (DE) at the wheel. This gave the BMW works driver the honour of creating the next milestone in the development of the BMW M6 GT3. "This is a big moment for everyone who has worked so intensely and passionately on the development of the BMW M6 GT3 in recent months," said BMW Motorsport Director Jens Marquardt.