2010 Bmw M6 Base on 2040-cars

Auto blog

Recharge Wrap-up: electric taxis in Montreal, Sebastien Buemi leads Formula E testing

Sebastien Buemi leads the pack in the second session of Formula E pre-season testing. Buemi, driving for Renault e.dams, set a new lap record at Donington Park with a time of 1:31.050s. Buemi says that, with a little bit of work, he feels like he could shave off another second or more. "We could do quite a bit on the car and the car is a bit easier to drive, the stability is better, the brakes are better," he says. "I see some good potential, we just need to extract it from the car." Sam Bird was the second fastest during the testing session, followed by Daniel Abt. Read more in the press release below. A Montreal taxi company plans to create a fleet of 2,000 electric taxis by 2019. Taxi Hochelaga currently has the city's second largest fleet with 500 taxis currently in service. Owner Alexandre Taillefer believes this large fleet of green taxis will help the company compete with ride services like Uber and Lyft. "We want to be an alternative to the second car and even to the first," says Taillefer. "We will reduce traffic on the roads and pollution." The company's first electric cabs could be in service as early as November. Read more at Green Car Reports, or, if you speak French, at Le Journal de Montreal. DriveNow is open to franchising. The carsharing company, owned by BMW and rental company Sixt, will allow third parties to operate the DriveNow program in certain cities, according to a report. DriveNow is set to launch a fleet of 400 electric cars in Copenhagen, Denmark with the help of Arriva Plc. Read more from Automotive News Europe. Kandi Technologies Group Inc. on Monday reported second-quarter net income of $5.4 million. On a per-share basis, the Jinhua, China-based company said it had profit of 12 cents. Earnings, adjusted for non-recurring gains, were 10 cents per share. The electric and all-terrain vehicle maker posted revenue of $48 million in the period. For the current quarter ending in October, Kandi Tech said it expects revenue in the range of $49 million to $51 million. Kandi Tech shares have dropped 45 percent since the beginning of the year. The stock has fallen 59 percent in the last 12 months. The AP contributed to this report. BUEMI STAYS ON TOP IN SECOND TEST Renault e.dams driver heads field for consecutive days at Donington Park DONINGTON PARK, UK (August 11 2015): Sebastien Buemi broke the Formula E lap record at Donington Park as he once again set the fastest time in pre-season testing.

Ford, GM still doing new business with Takata amidst airbag crisis

Lengthy vehicle development times make it difficult for automakers to cut and run from the supplier. You might expect automakers to be fleeing any connection with beleaguered supplier Takata in the wake of the company's exploding airbag inflator crisis. After all, with a Senate hearing, pending lawsuit, plummeting stock value and demand for a national recall, the tier-one supplier isn't at its strongest right now. However, years of cooperation mean that automakers are standing by Takata, and necessity may be playing a role, as well. About 39 percent of Takata's business comes from airbags, and seatbelts make up another significant chunk of the operation too, says Bloomberg. The long-term relationships and lengthy vehicle development times make it difficult for automakers to cut and run from the supplier. "Takata has so much product breadth that I don't really see that they could just disappear," said AutoPacific analyst Dave Sullivan to Bloomberg. For example, Takata helped develop the unique front center airbag with General Motors in models like the Chevrolet Traverse and Buick Enclave. Outside of safety tech, it is also a partner with Ford on the adaptive steering system available on the upcoming 2015 Edge. These long-lasting partnerships make change difficult now that there's a problem. According to Reuters, automakers claim it would take a year or longer to set up with a different supplier for replacement airbag inflators. Switching to a completely different part for the repairs might not be a viable option either, because of the engineering time needed. BMW is taking action, though. According to Reuters, the Bavarian brand is working with the supplier to move inflator production from Monclova, Mexico, to a Takata factory in Freiburg, Germany. The Mexican plant may be the source of some of the faulty parts. News Source: Bloomberg, ReutersImage Credit: Jens Meyer / AP Photo BMW Ford GM Safety Takata airbag recall

2016 BMW M4 GTS: More power, less weight, ready for the track

BMW calls its new M4 GTS the "most agile, radical, and powerful M4 ever." It's got 493 horsepower, a slick new water injection system, a three-way adjustable coilover suspension, and a weight reduction of roughly 200 pounds compared to a stock M4. Only 700 will be built, with 300 allocated for the United States. And did we mention it looks absolutely killer? Let's talk about that water injection system for a moment, because it's the first time this technology is being used on [an intercooled - Ed.] production road car. Basically, water absorbs heat from surrounding air, so a fine mist is sprayed into the intake manifold where it evaporates, lowering the temperature of the intake air. BMW says this reduces final compression temperature, allowing the turbochargers to operate with increased boost pressure and better spark timing. The end result is increased output – 493 horsepower and 442 pound-feet of torque from the same twin-turbo, 3.0-liter straight-six as the standard M4. That's an increase of 68 hp and 36 lb-ft. But the GTS isn't just about increased power. In fact, the bigger story is its weight reduction. BMW incorporated the use of aluminum and carbon fiber throughout the M4's construction, and DIN curb weight is listed as 3,329 pounds. It's unclear if that's the exact US measurement, and BMW couldn't comment on that as of this writing, but compared to our 3,530-pound stock M4, that represents some 200 fewer pounds of heft. Carbon fiber reinforced plastic (CFRP) is used in the hood, making that part some 25 percent lighter than the stock piece. CFRP is also used for the driveshaft, making it 40-percent lighter than the standard setup. Even inside the car, the new center console is 30-percent lighter than what you'd find in a normal M4. The rear seats are gone, and we're sorry to say that the cool racing buckets pictured here won't be available in the US. Making this thing super capable at the track is a three-way M coilover suspension, combined with upgraded carbon ceramic brakes, set behind staggered wheels and tires. Up front, the GTS rides on 19-inch rollers wrapped in 265/35-series Michelin Pilot Sport Cup 2 tires, and out back, 20-inch wheels are fitted inside 285/30-series rubber. The only transmission available is the seven-speed, M DCT dual-clutch unit, and when all is said in done, BMW says the M4 GTS will run the infamous Nurburgring Nordschleife in 7 minutes and 28 seconds. Another cool feature: organic LED technology.