2013 Bmw M5 Sedan White Only 3k Miles Hre Wheels Eisenmann Exhaust on 2040-cars

Auto blog

2014 BMW 4 Series Coupe officially debuts, priced from $41,425*

Well, that didn't take long. Less than two hours after the first images of the 2014 BMW 4 Series Coupe leaked onto the Internet, we've been given the go-ahead to publish the whole kit and caboodle. And while we won't say we told you so, it looks as though the car's official details are standing true to our earlier predictions.
In other words, BMW will offer the 4 Series in 428i and 435i models, both of which can be had with xDrive all-wheel drive. Just like in the 3 Series, the 428i is powered by a 2.0-liter turbocharged inline four-cylinder engine, good for 240 horsepower and 255 pound-feet of torque, and the 435i gets BMW's turbocharged 3.0-liter inline-six making 300 hp and 300 lb-ft. In three of the four models, both a six-speed manual and eight-speed automatic transmission are available; the 428i xDrive can only be had with the auto 'box. The 428i (with rear-wheel drive, we assume) can hit 60 miles per hour in 5.7 seconds (though BMW doesn't specify with which transmission), and the 435i will do that same sprint in 5.3 seconds with the manual and five seconds flat with the eight-speed auto.
We've already dissected the 4 Series' visuals, but the numbers show just how different it is from the 3 Series sedan. The 4 Coupe is one-tenth of an inch longer overall, while riding on the same 110.6-inch wheelbase, is 0.6 inches wider, and has a roofline that's a full 2.7 inches closer to the ground. It looks sleek, incorporating BMW's new design language from the 3 Series with an overall profile that's similar to the larger 6 Series coupe.

Mini Cooper SE Convertible wheels made entirely from recycled aluminum

Mini has revealed an interesting fact about its limited-run Mini Cooper SE Convertible: It's the first production car with wheels made from 100% recycled aluminum. Despite sharing the same look as wheels available on the regular SE hatch, they're actually much more environmentally friendly. The wheels were developed with Swiss wheel manufacturer Ronal. The company sells aftermarket wheels under the Ronal and Speedline brands, and it supplies OEMs. And it's no stranger to more environmentally-friendly wheel production. It supplies wheels for the Audi E-Tron GT that are made using a smelting process that produces oxygen rather than carbon dioxide, and it now has a line of claimed carbon-neutral aftermarket wheels. But back to the Mini's wheels. Using all recycled aluminum has the obvious benefit of not requiring new aluminum to be manufactured. But the benefits are greater than just the raw material use. Mini points out that a major improvement in carbon emissions comes from being able to skip the electrolysis process for new aluminum manufacturing. Pure aluminum is extracted from aluminum oxide (which is in turn taken from the mineral bauxite). To do this large amounts of electricity are passed through molten solutions of aluminum oxide and cryolite (which takes energy to heat) across graphite cathodes and annodes. Not only does this use a lot of electricity that has its own carbon costs, the oxygen that separates from the aluminum bonds to the graphite annodes, yielding more carbon dioxide (which is why the production of those Audi wheels is also interesting). In total, Mini says the recycled wheel production reduces carbon emissions by 75%. More specifically, it estimates about 0.16 kilograms (0.35 pounds) per kilogram (2.2 pounds) of aluminum used. Mini also stresses that this process still maintains all the strength of conventional wheels, just in a greener way. And of course, the wheels themselves are recyclable again. Mini, and BMW more broadly, are looking at ways to upscale the process and to source suitable recyclable products, likely other old wheels from cars no longer on the road. Though neither company said anything about when we'll see fully recycled wheels more widely available. Related Video: MINI Electric Pacesetter inside and out

BMW unleashes 160-hp S 1000 R streetfighter motorcycle

BMW Motorrad released the S 1000 RR superbike in 2010, but for those who'd like to take it down a (small) notch, the German motorcycle maker introduced the 2014 S 1000 R, a slightly less-ballsy version of the range-topping superbike, at EICMA on Tuesday.
In its transformation from 193-horsepower superbike to 160-hp sportbike, BMW detuned the 999cc inline four-cylinder engine a bit by lowering the redline from 13,000 RPM to 11,000 RPM, where peak power is made. Torque is rated at "approximately" 83 pound-feet (the RR makes 82.5 lb-ft), but more importantly, engineers tweaked the torque delivery in the R's favor by redesigning the cylinder-head ducts, modifying the camshaft profiles and reprogramming the engine management system. The result is seven lb-ft more torque than the RR up to 7,500 RPM. The R's torque peak occurs at 9,250 RPM.
The bike comes standard with ASC (automatic stability control) and "Race" ABS. Riders can choose between two modes, "Road" and "Rain," which adjust ABS and ASC settings to suit dry or wet roads. DTC (dynamic traction control) is available as an option, and with two modes, "Dynamic" and "Dynamic Pro," the system optimizes traction and helps riders achieve maximum acceleration.