1997 Bmw M3 Great Car!!!!!!! on 2040-cars

Auto blog

NHTSA slaps BMW with $40M fine for slow Mini recall

BMW is on the hook for a $40-million fine after the National Highway Traffic Safety Administration slapped the automaker over not recalling Minis that failed to meet minimum side-impact crash standards. The civil penalty from NHTSA concerns 2014 and 2015 Mini Cooper hatchback models that "failed a crash test designed to determine whether the vehicle met crash-protection minimums," the government agency said in a press release issued this week. An October 2014 test revealed the first problem, and the Mini was subsequently retested in July, only to fail again and finally prompt a recall of more than 30,000 cars. But according to NHTSA's investigation that was opened in October, BMW waited too long to issue a recall after it knew the cars did not meet standards and bring them into compliance with more energy-absorbing materials installed by Mini dealers. This is the second time NHTSA slapped BMW with a major penalty, following a $3-million fine back in 2012 failing to report recalls of its cars and motorcycles. "For the second time in three years, BMW has been penalized for failing to meet that obligation," NHTSA Administrator Mark Rosekind said in the release. "The company must take this opportunity to reform its procedures and its culture to put safety where it belongs: at the top of its priority list." In a separate release issued this week, BMW Group said it, "is committed to further improving its recall processes to better serve its customers," and that the company, "respects the role of NHTSA and looks forward to working with them to develop solutions for the future." National Highway Traffic Safety Administration fines BMW $40 million for failing to meet safety requirements Fine is auto company's second since 2012 WASHINGTON – The U.S. Department of Transportation's National Highway Traffic Safety Administration has imposed a $40 million civil penalty and a series of performance requirements to automaker BMW North America for a series of violations of the Motor Vehicle Safety Act and NHTSA regulations. Under terms of a Consent Order issued to BMW, the company acknowledges that it violated requirements to issue a timely recall of vehicles that did not comply with minimum crash protection standards, to notify owners of recalls in a timely fashion, and to provide accurate information about its recalls to NHTSA. NHTSA imposed a $3 million civil penalty to BMW in 2012 for similar violations.

BMW pays tribute with Z4 racing livery

Whether it's from Martini or BMW, there's something that makes us a little weak in the knees when we see a racing livery of dark blue, light blue and red stripes over white. Like the one on this BMW racer that will compete at Sebring next weekend. Presented alongside its spiritual predecessor at Amelia Island this weekend, this BMW Z4 GTLM has been decked out in a throwback version of the Bavarian automaker's iconic color scheme. It's a tribute to the BMW 3.0 CSL that scored the marque's first victory at the legendary Floridian endurance race 40 years ago and even wears the same number 25. It's as good a reason as any to bring back a racing livery we love, but then we'd probably take just about any occasion to appreciate it anyway. 40 years after the first win in Sebring: BMW presents anniversary design of the BMW Z4 GTLM for the 12-hour race. Munich (DE), 14th March 2015. On 21st March, BMW Team RLL will contest the 63rd staging of the legendary 12-hour race of Sebring (US) in the US state of Florida. The endurance classic is also the second race of the 2015 United SportsCar Championship (USCC). BMW Motorsport and BMW of North America celebrate a special anniversary on their return to Sebring this season: 40 years ago, BMW Motorsport got its first Sebring victory, with the BMW 3.0 CSL. In honour of that success, the two BMW Z4 GTLMs of BMW Team RLL will sport special designs as they compete on the "Sebring International Raceway". Car number 25 will carry the colours of the winning BMW 3.0 CSL of 1975. At an unveiling ceremony, which was part of the "Amelia Island Concours d'Elegance" in northern Florida, BMW of North America presented the anniversary design of the vehicles to the public for the first time. Many of the successful heroes of that time took the opportunity to attend the presentation. Forty years after the historic victory, then winners Brian Redman (US), Sam Posey (US) and Hans-Joachim Stuck (DE) were reunited on Amelia Island. Jochen Neerpasch, the first managing director of BMW Motorsport GmbH, and BMW Motorsport Director Jens Marquardt were also among the guests. They all had front row seats as current BMW Team RLL driver Bill Auberlen (US) completed the first presentation laps in the BMW Z4 GTLM with the anniversary design. 1975 was a significant year in the history of BMW in North America: BMW of North America was founded, and just a few days later came the historic first victory with the BMW 3.0 CSL in Sebring.

New BMW i3-like Visio.M EV concept uses lightweight resin

It's not a new version of the BMW i3, but an updated version of a lightweight concept car from SABIC, BMW, the Technical University of Munich, Daimler and others does bear a certain resemblance to the well-designed plug-in city car. From the black "glass" in the hatch to the angled line tail lights to the up-and-down window line, you can see a sort of family resemblance (see an i3 comparison photo here). And, of course, they both have an electric powertrain. But the changes made to the new lightweight urban electric concept vehicle is more of an exercise in what's possible rather than a way to evolve the i3 and i8 into a broader i family of vehicles. Even so, what we see here is interesting, since SABIC found all sorts of new ways to take weight out of the car as part of the Visio.M (Visionary Mobility) project, which was first announced in 2012. Let's start with the window material, which as you might guess from the quotation marks above, is not made of glass but is instead SABIC's Lexan polycarbonate (PC) resin plastic. The lower weight (the PC helps shed about 29 pounds) adds two miles of range while the PC resin has better thermal conductivity compared to glass and so does even more because the HVAC system can be more efficient. According to SABIC's computational fluid dynamics analysis, an extra 9-10 miles of range, in fact. Without the battery, this concept weighs just 992 pounds. Remember, BMW already made a lot of weight-reduction measures in the i3 thanks to carbon fiber reinforced plastic, so to make the "glass" lighter would only help boost efficiencies on a production vehicle that uses a resin like this. Read more below. SABIC's LEXAN™ resin delivers weight savings and thermal efficiency for new ultra-lightweight electric car concept developed by BMW-led Visio.M Consortium Munich, October 20, 2014 Today, at the Technical University of Munich (TUM), BMW, Daimler, TUM scientists and a consortium of industry participants showcased a lightweight urban electric concept vehicle with various advances, including an all-plastic design of the car's windows. The windows are made of LEXAN resin, a polycarbonate (PC) material, and coating technologies from SABIC, a leading developer of PC glazing for automotive windows and many other thermoplastic solutions for the automotive industry.