Bmw 540i on 2040-cars

Auto blog

BMW discussing supercar collaboration with McLaren

BMW is reportedly considering a new halo supercar. But rather than go it alone, word has it that the Bavarian automaker is discussing a potential partnership with McLaren to make the idea a reality. This according to Britain's Car magazine, which suggests that negotiations are well underway. The proposal would see the BMW supercar based on the same architecture that will to underpin Woking's P16 project that's set to replace current 650S. Rather than use the 3.8-liter twin-turbo V8 that McLaren developed together with Ricardo, the Bimmer version would use Munich's own engine: a 4.0-liter V8 with quad turbochargers – two conventional spools and two more electrically driven chargers. Their combined effect would net an expected 750 horsepower. Further differentiations on McLaren's carbon monocoque architecture for use in the BMW would include custom bodywork, aerodynamics, and interior fitments to include a unique instrument panel. Production, however, would be handled at the McLaren Production Centre in Woking, to the tune of several hundred units per year. The project would take the place of several aborted programs undertaken internally at BMW. One called for an entirely unique supercar developed in-house, referred to internally as the M100. When that project was aborted so that BMW could concentrate on the i sub-brand, BMW's own skunkworks shifted its focus to developing a more performance-focused version of the i8, known by some as the i8 CSi. When that project was canned as well, discussions with McLaren commenced. It wouldn't be the first time BMW would outsource development of its own supercar, or even the first time BMW would collaborate with McLaren on such a project. Initial development work on the original M1 in the 1970s was undertaken by Lamborghini before being taken in-house. And, of course, BMW provided the engine for the legendary McLaren F1. Meanwhile McLaren performed a similar function for Mercedes-Benz with the SLR, demonstrating Woking's experience in building flagship supercars for German automakers. This latest project could suffer the same fate as the M100 and i8 CSi programs. But if it is approved, it could yield both coupe and convertible versions, with the first slated to surface at the Frankfurt Motor Show in 2017 and reach dealerships in 2019.

BMW can't build enough M3 wagons, but the U.S. won't see any

Why, oh why, won’t the automobile companies that supposedly cater to Americans give us a viable touring wagon? Seems that BMW is one manufacturer thatÂ’s aware of the question, but skirts the answer. WhatÂ’s more frustrating is that the German company, and others, have for years been off-handedly tossing out the same refrain: “Maybe weÂ’ll bring a wagon back to the U.S.” Not. All the more irritating then is the news that the Bavarians have increased production in Munich of its M3 Touring longroof version to keep up with demand. The information comes via Bimmer Today, which spoke with BMW M CEO Frank van Meel. He said that the company was surprised by the amount of interest in the M3 Touring since its debut during last year's Goodwood Festival of Speed. In fact, he said, the company had to facilitate a production ramp-up within its Munich facility. Despite that increased production, the backlog of orders means that customers are still on wait lists, he said. Last year, van Peel admitted that demand for M-wagons in the U.S. has been steadily increasing, and exporting a touring example was a concept BMW was "taking into consideration.” Crossovers certainly are this decadeÂ’s version of the wagon, which leaves American enthusiasts will few choices: only expensive versions from Audi, Volvo and Mercedes-Benz and a couple of others. Details that were announced last year — a few months before the wagon went into production for sale in Europe, the U.K. and elsewhere — noted that the M3 Touring was only available in Competition spec with xDrive all-wheel drive and a 3.0-liter twin-turbo inline-six with 503 horsepower and 479 pound-feet of torque. Pricing started at GBP80,550 ($105,000 U.S.) More data on the M3Â’s intro here. Related video:

2015 Dinan M235i First Drive

The first rule you learn about playing hide-and-seek is to wait until the seeker is out of sight before you move on to your next position. That feeling comes back to us as we're sitting in the Dinan-tuned 2015 BMW M235i on the twisty stretch of Route 152 near Gilroy, CA. Construction restricts the road to one lane before opening up to five miles of uninterrupted switchbacks. A local tipped us off to pull over and wait for traffic to clear, guaranteeing an open road and no risk of law enforcement seeking us out. Our first turn behind the wheel of the Dinan M235i started just a few miles north at the tuner's engineering and development center, located in an unassuming office park south of San Jose. Dinan conversions are known for being simultaneously subtle and awesome; an enhancement of products that already stand out in their respective classes. Dinan obtains its R&D cars through consumer channels, unlike some tuners that get early access to BMW's engineering for their own development projects. The development process is "reverse engineering," as technical director Casper van der Schoot describes it. Some development cars also come to Dinan through the generosity of its owner fan base. Customers hand over personal vehicles in exchange for discounted products. An M2 is already on order, and the Dinan engineers are on the edge of their seats waiting to take it apart. The Dinan treatment of the M235i increases performance without reinventing the dynamically sound package. As with other Dinan cars, the treatment on the M235i increases performance without reinventing the dynamically sound package. Approved dealers can install the Dinan parts, as can "anyone with a modest amount of technical aptitude," according to van de Schoot. Dinan's approach is to extract more of the best aspects of BMW products before supplanting stock parts with its own. That's why the M235i, like all Dinan products, comes with the eponymous Dinantronics engine control unit that remaps and finds more power from the stock inline-six-cylinder engine. A bespoke carbon-fiber cold air intake and stainless steel free-flow exhaust system add at least 15 more horsepower. The most significant alterations in the M235i's engine bay are a Dinan-rebuilt turbocharger and larger intercooler, which help increase total output beyond 440 horsepower. At this point you might wonder if all this untapped capacity is at BMW's disposal from the start, why does it take Dinan to release it?