530i Classic Vintage 5 Series/hard To Find Like This/cold Factory A/c/orig Radio on 2040-cars

Auto blog

BMW joins the mirrorless car club at CES

Another item the future promised us is finally arriving: cameras for rearview mirrors. It's coming on the Cadillac CT6, Audi played around with the idea in its Le Mans racers, and Tesla has plans to get in on the action. And now add BMW to that list with the i8 Mirrorless concept revealed at the 2016 Consumer Electronics Show in Las Vegas. In BMW's scheme, three cameras replace the mirrors. One big adjustment from years of automotive convention is the lack of any side glances for the driver. A display in place of the conventional rearview mirror shows a composite wide-angle image. Imminent hazards, such as a vehicle in the blind spot, are shown with yellow warning icons. Previous mirrorless designs have mounted cameras flush with the body, but the i8 Mirrorless uses wing-like side cameras. They also serve as turn signal indicators. We assume that the narrow profile is more aerodynamic than the housing for a large piece of reflective glass. Also in BMW's CES bag of tricks is the BMW i3 Extended Rearview Mirror. This uses a rear-facing, roof-mounted camera that overlays images on the conventional interior mirror. But we do have some questions – what happens when the cameras get dirty? Mirrors still work even when partially obscured by dirt. And when will these ideas see production? Stay tuned as we'll follow up with answers from BMW's booth on the CES show floor soon.

2014 BMW 4 Series drops its top, priced from $48,750*

BMW will debut its new 2014 4 Series Convertible at the Los Angeles Auto Show in November, and after seeing plenty of spy shots and, most recently, some leaked images, we now have all the official details. To no one's surprise, the 4 Series convertible is, essentially, a topless version of BMW's new-for-2014 4 Series coupe, and will be offered in the United States in the same 428i and 435i guises.
On the base end, that means the 428i Convertible arrives with the company's 2.0-liter turbocharged inline four-cylinder engine, good for 240 horsepower and 255 pound-feet of torque, and available with either rear- or all-wheel drive. BMW says the 428i will sprint to 60 miles per hour in a respectable 6.2 seconds. For folks in need of more thrust, BMW will happily sell you a 435i Convertible, available only with rear-wheel drive, powered by a 3.0-liter, twin-turbocharged inline-six that produces 300 hp and 300 lb-ft of twist. Hitting 60 mph in the 435i will take roughly five and a half seconds with the standard eight-speed auto. Curiously, BMW did not mention anything about a six-speed manual transmission for either model, so looks like this droptop might be an auto-only affair. We've contacted BMW for confirmation, so we'll keep you posted.
Like the 3 Series Convertible it replaces, the 4 Series uses a three-piece folding hardtop configuration, and BMW says that added sound deadening reduces audible wind noise by about two decibels. Folding the automatic roof takes just 20 seconds, and can be done at speeds up to roughly 11 mph. For chilly, top-down driving (something we're big fans of), there are now three-temperature neck warmers for the front seats - just like what Mercedes-Benz offers with its AirScarf system.

BMW 1 Series prototype packs direct water injection

Just a few months ago, BMW showcased an M4 that was modified to serve as the safety car for the MotoGP racing series. The flashing lights and emergency equipment, however, weren't the only modifications BMW made to the performance coupe. It also packed an innovative new water injection system. And now it's furthering the development of that system by running it in a 1 Series hatchback as well. Revealed at the BMW Group Innovation Days 2015 event, this five-door 1 Series packs a three-cylinder gasoline engine – like the one found in a Mini or i8 – but fitted with the direct water injection system. In this application, the system sprays a fine mist of water – yep, regular old H2O – right into the combustion chamber. While mixing water with gasoline normally wouldn't be recommended, in this case it evaporates immediately and helps cool the engine from the inside, allowing it to run at higher efficiency. That cooler running engine brings with it several benefits. It delivers improved fuel economy and lower emissions, to start. It also allows for an earlier ignition point, higher compression ratio, and higher boost pressure in turbocharged engines, delivering increased output. It even cuts down on engine knocking (where combustion occurs spontaneously), reduces wear and tear on the engine, and makes better use of lower octane levels. If that sounds like a win-win-win... win (we're losing count of all the wins here), it's because BMW just may be on to something. Of course it does require a water tank to be fitted on board, which means added weight, but instead of requiring the driver fill up the water tank, BMW has fitted this prototype with a system that replenishes the water level from the air conditioning system when the vehicle is switched off. So unless it's being driven in a particularly extreme climate, it doesn't even need topping up. Add one more "win" to the list, then. Extra power, improved real-world fuel economy: Direct water injection enhances efficiency. With direct water injection for turbocharged petrol engines, the BMW Group has again succeeded in enhancing the capabilities of conventional engine technology through an ongoing process of refinement and improvement. The precisely controlled injection of water into the engine cylinders produces a cooling effect that boosts power and torque, particularly when operating at or near full throttle, while at the same time reducing fuel consumption and emissions.