535i Xdrive 3.0l Cd Awd Turbocharged Keyless Start Power Steering Sun/moonroof on 2040-cars

Auto blog

Next BMW M3 sedan to be plug-in hybrid?

BMW has a lot in mind for the next-generation 3 Series and 4 Series cars, and we're hearing about it now even though they're not expected for another three or four years. The sedan is expected to be lighter, wider, with a longer wheelbase and a lower center of gravity. Rumored tech updates include the water injection system debuted in production on the BMW 1 Series, and the 4 Series convertible might go back to a fabric top. Now The Detroit Bureau reports BMW insiders have revealed that the next M3 will get a plug-in hybrid drivetrain. We've heard about plug-in variants in the mix for the G20 3 Series using a small displacement four-cylinder, but not on the M3 and possibly M4. The goal is familiar, according to the "several senior company officials:" to improve the performance while reducing the emissions footprint. Apparently, the power unit being worked on uses a "similar engine" to the 425-horsepower, 3.0-liter inline six employed at the moment, with power sent to the rear wheels. Electric assistance would come from a KERS-like unit that would also - and only - send power to the rear wheels. Torque is said to go up at least 73 pound-feet from the 406 lb-ft available currently, and all-electric range might be as much as 20 miles. Plenty of carbon fiber will help offset the weight of the lithium-ion batteries. Despite company obfuscations, we know BMW is working on a hybrid powertrain for a vehicle rumored to be called either i5 or i7, and would use one or two electric motors to drive the front wheels while the traditional ICE drives the rear wheels. This potential M3 and M4 powertrain would be an offshoot of that engineering. Automobile speculates there will be electric turbochargers and a horsepower number around 500. Related Video:

Recharge Wrap-up: Chevy hits CO2 goal, eVgo and BMW build fast charging

Chevrolet has met its goal of preventing 8 million metric tons of CO2 emissions over the last five years. Through its community-based carbon reduction initiative, Chevy invested $40 million and took part in 38 different projects in 29 different states. The projects included supporting wind farms, powering a hospital with landfill gas, helping truckers reduce their idle time and helping create the ongoing #CleanEnergyU dialogue between students and clean energy leaders. In the end, Chevy retired all its carbon credits rather then spending them to offset its own emissions. Read more from Chevrolet. NRG eVgo and BMW are partnering to add DC Fast Combo charging to locations around the country. Over the next two years, the groups will bring hundreds of the 50-kW chargers to 25 cities, with 24 of those markets getting at least one installed by the end of 2015. "eVgo will add reliable DC Fast Combo capability to what is already America's largest DC Fast charging network," says eVgo President and CEO Arun Banskota. "This will be the fastest and most cost effective build out of a new network ever – thanks in large part to our existing infrastructure and committed retail host partners." Read more in the press release from eVgo. The EPA has settled with a Utah gasoline refiner over Clean Air Act violations. The HollyFrontier Corporation subsidiaries will pay $1.2 million for producing about 42 million gallons of gas that didn't adhere to Reid Vapor Pressure standards, resulting in 10 excess tons of volatile organic compound emissions. Its Salt Lake City refinery will also implement a program to offset past emissions. "This agreement will benefit public health by requiring retrofits of storage tanks at HollyFrontier facilities that will reduce volatile organic compound emissions and use next generation technology to verify these reductions," says Assistant Attorney General John Cruden. "This settlement shows that fuel refiners can and must meet the nation's standards for controlling the emissions that cause ground level ozone and serious health problems for Americans." Read more in the press release below. U.S. Settles with Gasoline Refiner to Reduce Emissions at Utah Facility WASHINGTON -- The U.S.

BMW i8 customized by AC Schnitzer [w/video]

It may not enjoy the kind of factory support that Alpina does (let alone Munich's own M division), but as far as independent BMW tuners go, few have the kind of clout that AC Schnitzer does. Heck, it even won the DTM championship for BMW in its first year back in the series. And now the legendary Bimmer tuner has turned its attention to the i8. The list of Schnitzer's enhancements for the plug-in hybrid sports car is long, but perhaps wisely shies away from messing with the intricate powertrain. Instead the customization options focus on elements like the suspension, rolling stock, aero kit, and interior. AC Schnitzer has dropped the ride height by almost an inch at the front and 0.78 inches at the rear. It's fitted a set of 21-inch forged alloys with five split spokes and low-profile rubber to trim nearly ten pounds off the vehicle's unsprung weight while increasing its contact patch for better grip (albeit likely with higher rolling resistance). There's also a comprehensive rolling kit made of carbon fiber, including front spoiler elements, side skirts, and a rear wing that to our eye looks a little out of place on the i8, though individual customers may disagree. And the interior has been upgraded with aluminum pedals and velour floor mats. Of course customers will be able to pick and choose which elements they'd want to install on their hybrid vehicles, but you can check out the fully spec'd demonstrator in the high-resolution image gallery above and in the video below. (You just may want to turn down your speakers if you're not into German techno-pop.) Revolutionary Sporting Performance and Innovative Design The i8 by AC Schnitzer emphasises the strengths of the plug-in hybrid from Munich The BMW i8 is revolutionising its vehicle class as the first sports car to have the fuel consumption and emission values of a small car. Now thanks to AC Schnitzer, this revolution is being followed by another: the AC Schnitzer special equipment for the BMW i8 emphasises even more clearly the sporting performance and innovative design of the powerful, environmentally-friendly coupe. Lowered by 25 mm at the front and 20 mm at the rear, the i8 by AC Schnitzer hugs the tarmac more closely than the standard vehicle and can therefore develop maximum efficiency and dynamics on the road.