2004 Bmw 530 I on 2040-cars

Auto blog

Next BMW M3 sedan to be plug-in hybrid?

BMW has a lot in mind for the next-generation 3 Series and 4 Series cars, and we're hearing about it now even though they're not expected for another three or four years. The sedan is expected to be lighter, wider, with a longer wheelbase and a lower center of gravity. Rumored tech updates include the water injection system debuted in production on the BMW 1 Series, and the 4 Series convertible might go back to a fabric top. Now The Detroit Bureau reports BMW insiders have revealed that the next M3 will get a plug-in hybrid drivetrain. We've heard about plug-in variants in the mix for the G20 3 Series using a small displacement four-cylinder, but not on the M3 and possibly M4. The goal is familiar, according to the "several senior company officials:" to improve the performance while reducing the emissions footprint. Apparently, the power unit being worked on uses a "similar engine" to the 425-horsepower, 3.0-liter inline six employed at the moment, with power sent to the rear wheels. Electric assistance would come from a KERS-like unit that would also - and only - send power to the rear wheels. Torque is said to go up at least 73 pound-feet from the 406 lb-ft available currently, and all-electric range might be as much as 20 miles. Plenty of carbon fiber will help offset the weight of the lithium-ion batteries. Despite company obfuscations, we know BMW is working on a hybrid powertrain for a vehicle rumored to be called either i5 or i7, and would use one or two electric motors to drive the front wheels while the traditional ICE drives the rear wheels. This potential M3 and M4 powertrain would be an offshoot of that engineering. Automobile speculates there will be electric turbochargers and a horsepower number around 500. Related Video:

2016 BMW 7 Series slims down, techs up

BMW is finally pulling the wraps off its sixth-generation 7 Series. The flagship boasts a ton of improvements for 2016, including a smattering of onboard tech and weight reduction of 190 pounds. The 7 Series uses a new internal structure called Carbon Core. Derived from the i sub-brand, Carbon Core uses a mix of carbon-fiber-reinforced plastic and ultra-high-tensile steel for the 7's major structural components. It's largely responsible for the 190-pound weight reduction, along with the aluminum doors and trunk lid. The weight savings has allowed BMW to maintain a fifty-fifty weight distribution. That new structure underpins the largest sedan BMW has ever produced. At 206.6 inches in total, the long-wheelbase-only 7 Series is over an inch longer than its predecessor. Its 124.6-inch wheelbase and 74.9-inch width, though, remain unchanged. Even with such a modest increase in size, BMW is claiming best-in-class rear legroom, at 44.4 inches – a tenth of an inch more than the current 7. Unlike the old car, though, this new 7 Series gets with the times in terms of chauffeur equipment. The front passenger seat can be slid forward and folded, allowing a lucky rear passenger to take advantage of the new pop-out footrest and optional 42.5-degree seat incline, available as part of the Rear Executive Lounge Seating Package. iDrive now adds a number of 3D sensors that respond to pre-programed hand motions. The 7 Series will debut here in the United States with two engines, both of which should be familiar to BMW consumers. There's a 320-horsepower, 3.0-liter, turbocharged six-cylinder in the nose of the 740i, and a 4.4-liter, twin-turbocharged V8 with 445 hp on tap in the 750i xDrive. 60 miles per hour arrives in a relaxed 5.4 seconds for the 740i and 4.3 seconds in the V8 model. Once again, ZF provides the eight-speed automatic transmission used with both engines. Joining the 740i and 750i is the new 740e xDrive. The plug-in-hybrid sedan is motivated by a 2.0-liter, turbocharged four-cylinder and an electric motor, and is capable of 23 miles per charge and speeds of up to 75 miles per hour in pure electric mode. Tthere's no shortage of tech on the latest 7 Series. While we're familiar with some items, like active grille shutters and BMW's Air Breather system, it's items like the gesture-control-equipped iDrive 5.0 that pique our interest. Alongside the new and standard touchscreen, iDrive now adds a number of 3D sensors that respond to pre-programed hand motions.

BMW Concept Roadster has two fewer wheels than we were expecting

The annual Concorso d'Eleganza Villa d'Este on the shores of Lake Como is an opportunity for some of the most beautiful vehicles in the world to descend on one of the poshest places on earth each year. Unsurprisingly, the event is also increasingly the chance for automakers to debut exclusive concepts to some of the wealthiest auto enthusiasts in the world. In the last few years, BMW has become the masters of this annual unveiling with automotive concepts like the Gran Lusso Coupé, BMW Zagato Coupe and motorcycles like the the gorgeous Concept 90, not to mention the just-revealed Mini Superleggera Vision. But this year the Bavarian automaker has been somewhat tricky.
What would you first think when you heard of the BMW Concept Roadster? A lithe, two-seat convertible? Nope. This roadster is a cut-down, minimalist motorcycle with an ultra-modern design. As opposed to the retro looks of the Concept 90, this naked bike looks like it could fit in a BMW showroom tomorrow and not seem out of place.
The Concept Roadster packs the brand's classic two-cylinder boxer engine displacing 1,170 cubic centimeters and producing 123 horsepower and 92 pound-feet of torque. That power is routed to the rear wheel via a cardan drive, essentially a driveshaft, with a single-sided swing arm rear suspension. It's all nestled in a tubular spaceframe.