1972 Bmw Tii on 2040-cars

Auto blog

BMW GoPro integration now works with your iPhone

Coming this summer an upgrade to BMW's GoPro integration will combine the camera's feed with the M Laptimer app. This will let Bimmer drivers get a look at both lap telemetry and video replay at the same time. Despite the upgrades, BMW's setup lacks some of the features of the impressive Performance Data Recorder found on the Chevrolet Corvette and Camaro. BMW already let drivers control a GoPro through iDrive, but this improvement makes the functionality a lot more for track use. As soon as someone activates the M Laptimer app, the GoPro automatically starts recording. The video still saves in the camera's memory, but a low-res version also goes to the connected iPhone to sync with the app's data. Drivers can then see driving data on top of the phone's screen and the clip on the bottom (right). The M Laptimer monitors details like throttle input, speed, braking, steering angle, engine revs, fuel level, and g-force. Plus, the system records top speed, number of laps, best lap time, and the ambient temperature. We wish this system were as neatly integrated as the GM's Performance Data Recorder. For this system to work, a driver needs a GoPro HERO3 or later camera, the BMW M Laptimer app on their iPhone (4S or newer), a BMW model capable of running BMW Apps, and the phone must be connected to the infotainment system. Anything that can help shave a few tenths off a lap and then share the video of that accomplishment with buddies is a welcome improvement, though. Related Video: GOPRO INTEGRATION FOR BMW M LAPTIMER APP Two of BMW enthusiasts' favorite app integrations team up to offer an unparalleled way to capture and share their on-track experience Mountain View, CA/Woodcliff Lake, NJ – April 14, 2016 The BMW Group Technology Office USA and GoPro announced today that beginning summer 2016 the BMW M Laptimer app, a favorite app integration among driving enthusiasts, will include the ability to control a GoPro camera on iOS devices, using BMW's state-of-the-art iDrive controller and high-resolution screen. With this enhancement, when BMW drivers start and stop the BMW M Laptimer they simultaneously start and stop the recording of the connected GoPro camera. In addition to the video stored on the GoPro camera, a low-res version is saved on the phone so that it can be played back next to the map view on the BMW M Laptimer app. "The BMW M Laptimer and GoPro integrations have both proven to be incredibly popular with driving enthusiasts.

The next-generation wearable will be your car

This year's CES has had a heavy emphasis on the class of device known as the "wearable" – think about the Apple Watch, or Fitbit, if that's helpful. These devices usually piggyback off of a smartphone's hardware or some other data connection and utilize various onboard sensors and feedback devices to interact with the wearer. In the case of the Fitbit, it's health tracking through sensors that monitor your pulse and movement; for the Apple Watch and similar devices, it's all that and some more. Manufacturers seem to be developing a consensus that vehicles should be taking on some of a wearable's functionality. As evidenced by Volvo's newly announced tie-up with the Microsoft Band 2 fitness tracking wearable, car manufacturers are starting to explore how wearable devices will help drivers. The On Call app brings voice commands, spoken into the Band 2, into the mix. It'll allow you to pass an address from your smartphone's agenda right to your Volvo's nav system, or to preheat your car. Eventually, Volvo would like your car to learn things about your routines, and communicate back to you – or even, improvise to help you wake up earlier to avoid that traffic that might make you late. Do you need to buy a device, like the $249 Band 2, and always wear it to have these sorts of interactions with your car? Despite the emphasis on wearables, CES 2016 has also given us a glimmer of a vehicle future that cuts out the wearable middleman entirely. Take Audi's new Fit Driver project. The goal is to reduce driver stress levels, prevent driver fatigue, and provide a relaxing interior environment by adjusting cabin elements like seat massage, climate control, and even the interior lighting. While it focuses on a wearable device to monitor heart rate and skin temperature, the Audi itself will use on-board sensors to examine driving style and breathing rate as well as external conditions – the weather, traffic, that sort of thing. Could the seats measure skin temperature? Could the seatbelt measure heart rate? Seems like Audi might not need the wearable at all – the car's already doing most of the work. Whether there's a device on a driver's wrist or not, manufacturers seem to be developing a consensus that vehicles should be taking on some of a wearable's functionality.

BMW makes X7 in Spartanburg official

BMW has made it official - there will be a flagship crossover called X7, and it will be built right here in the US of A. The announcement was made today, confirming rumors of the new model at the Spartanburg, SC factory that broke earlier this week.
"Plant Spartanburg was built to enhance and expand the BMW lineup, underscoring the BMW Group commitment to the United States" said Dr. Norbert Reithofer, chairman of the BMW board of management in a statement. "In addition to the X3, X5, X6, and the new X4, we are today announcing another all-new, larger X model to be manufactured exclusively at this plant for our world markets: the X7."
BMW will spend $1 billion by 2016 upgrading its South Carolina factory, which already produces the X3, X5 and X6. The plant is currently capable of producing 300,000 units per year, but with the big investment from BMW, capacity will climb to 450,000 units. 800 jobs will be added as a result of the investment and new and upcoming models.