Mulliner Pkg, Convenience Pkg, Naim Audio, Contrast Stitch, Veneers!!! on 2040-cars

Auto blog

2017 Bentley Mulsanne defines the latest in handcrafted luxury

It takes 144 craftsmen roughly 399 hours to build a Bentley Mulsanne. In today's world of automation and just-in-time parts delivery, such statistics sound ridiculous. But this old-school approach to vehicle assembly earns this beast its status as Bentley's flagship. It takes about a third of that time to assemble a Continental GT, for instance, which is one reason the Mulsanne is so expensive. It's also why Bentley moves more than five Continental models for every Mulsanne it sells. Bentley has a brand-new crown jewel coming soon to dealerships as a 2017 model, and it will debut next week at the 2016 Geneva Motor Show. An Extended Wheelbase version joins the base Mulsanne and the Speed, pushing the lineup to three for the first time. Although Bentley officials take pride in the fact they are the largest producer of 12-cylinder engines in the world, the Mulsanne continues to soldier forth with the long-serving 6.75-liter V8. While this L-Series engine traces its roots all the way back to 1959, as evidenced by its cam-in-block overhead-valve design, it's been fully modernized with electronic controls and twin turbochargers. The result is 505 horsepower and 752 pound-feet of torque (or 530 hp and 811 lb-ft in the Speed), routed through a ZF eight-speed automatic transmission to the rear wheels. This is the same engine that has powered flagship Bentleys since 2010, and it's effortlessly capable of pushing the Mulsanne from 0-60 in 5.1 seconds and all the way up to a top speed of 184 miles per hour. The upgraded Mulsanne Speed improves those figures to 4.8 seconds and 190 mph. That's plenty of performance for this kind of vehicle, weighing as it does nearly 6,000 pounds. With that kind of power and heft, a solid chassis is a must. Active engine mounts join new suspension bushings for 2017, and the air suspension system has been updated. Continuous Damping Control and a Drive Dynamics Control System with three factory and one custom setting are standard. Also new are tires codeveloped with Dunlop that have foam-filled cavities to reduce interior cabin noise. Where the styling of the outgoing Mulsanne is smooth and stately, the new one is more angular and modern. At the front, the traditional upright grille remains, but it's over three inches wider than before, and is slatted with vertical vanes in polished stainless steel that are meant to recall Bentley classics from the 1930s.

Bentley resumes restoration of the first T-Series sedan

Bentley has shifted one of its on-going restoration projects into high gear. Found after spending decades undriven, the first T-Series sedan built is being brought back to life by the British company's apprentices and specialists and it should be back on the road by the end of 2023. Manufactured on September 28, 1965, about a week before the model's official unveiling at that year's Paris auto show, the oldest T-Series was finished in Shell Gray with a blue interior. Bentley initially kept the car and used it as a test mule around the world. The big sedan later ended up in private hands with a blue California plate and a "Beverly Hills Motor Cars" plate frame attached to its rear end. It was last registered in 2015, according to the sticker on the plate, though Bentley notes that it has spent decades off the road and in storage. Bentley bought the car and shipped it back to its headquarters in England. It started tearing down the sedan in October 2016: A group of apprentices removed the exterior trim and began preparing the body for new paint, but the project stalled. See, this happens even to luxury carmakers — don't feel bad about the Fox-generation Mustang lingering in the back of your garage. For collectors, projects tend to get delayed when, for better or worse, life happens. Bentley ran into different hurdles: It put the T-Series on the backburner to launch its current range of models, including the Flying Spur and the Continental GT. Nearly six year later, the firm is returning to the garage to wrap things up. It sounds like the T-Series was stored indoors, and being out of the elements might be its saving grace. Mechanics managed to fire up the 6.2-liter, 225-horsepower V8 engine, and they gave it a clean bill of health; the automatic transmission is in good condition as well. There is still some body work that needs to be completed and the interior is almost completely taken apart. Bentley estimates that the project will take approximately 18 months, so it should be finished by late 2023, and it plans to add the car to its Heritage Collection when it's done.  While it's a relatively obscure classic in 2022, the T-Series remains a hugely important part of Bentley's heritage.

Bentley plotting rear-drive Continental GT3-R?

Coupe, convertible or Flying Spur sedan: no matter what body-style you get, or what engine you specify, the Bentley Continental comes with all-wheel drive. It's been that way since the model line was first introduced a dozen years ago. But that looks poised to change... at least for one notable exception. According to Autocar, Bentley is all but certain to launch a rear-drive version of the Continental GT3-R sometime next year, ditching the front half of the drivetrain to cut a good 440 pounds off the curb weight to make it the lightest Conti yet. The Continental GT3-R launched last year with less weight and more power, along with a stiffer suspension, upgraded brakes and a titanium exhaust. It drew its inspiration from the Continental GT3 racer, but unlike the competition version, kept the AWD drivetrain in place. "A lot of people expected the GT3-R to be a proper rear-wheel-drive sports car," Bentley's chief engineer Rolf Frech said to Autocar, "but the problem was timing. We needed the car at the end of the first season of our GT3 racing car, and to do a proper change of the complete powertrain needed longer than we had. But we have the concept in our mind, so why not?" Denuded of its all-wheel drive, the Conti GT3-RS – assuming Porsche doesn't mind lending the name to its sister company – would be the most hardcore version of the go-to luxury coupe, and would promise to cut its already blitzkreig 3.6-second 0-60 time down even further. Especially if the 4.0-liter twin-turbo V8 were tuned to deliver even more than the 572 horsepower and 516 pound-feet of torque it already kicks out in the existing GT3-R. Chances are it'd be even less accessible, though: the 99 examples of the Conti GT3-R that are coming to the States out of the 300 total to be made already carry a $337k sticker price, and the rear-drive model would likely push the production:price see-saw even higher to the right.