Convertible Gtc *beautiful Silverlake* 15k Miles - Stunning 1 Owner Carfax on 2040-cars

Auto blog

2019 Mercedes-Benz G-Class vs big luxury off-roaders: How they compare on paper

During our first drive of the 2019 Mercedes-Benz G-Class, the all-new SUV's product manager was asked to identify competitors that might have been benchmarked in its development. The look on his face was about the same as if someone had asked him to recite King Lear in Klingon. As far as Andreas Hoeppel was concerned, the G 550 and AMG G 63 doesn't actually have a rival, or at least something the engineers and designers thought to compare it against. The G-Class is a G-Class, who cares what the other guys are doing? Well, in case you care, we figured we'd plug the new G-Class' specs into the old Autoblog Comparo Generator 3000 (TM) to see how the G 550 and AMG G 63 compare to the Range Rover and its mightiest SVAutobiography Dynamic model, plus the Lexus LX 570 and Bentley Bentayga V8. Frankly, Heir Hoeppel was onto something as each of these is wildly different. But, they do share some common elements: giant size and weight, ultra-lux interiors, and far more off-roading capability than other luxury SUVs offer and any of its owners are likely to ever utilize. Sad. So enjoy this trip down specification lane, and if you're still left hungry, you can always check out our Range Rover comparison or create your very own comparo. Off-Road Clearances and Capability All the fancy off-roading software and special cameras in the world won't do you a lick of good if your SUV is too close to the ground or has low-hanging body work that'll get easily ripped off. As such, check out each of these uber-SUV's ground clearance, approach and departure angles, and wading/fording depths. In this case, the Range Rover has an advantage due to its air suspension that can raise itself into an Off-Roading height that's a whopping 2 inches higher than the new G-Wagen. Sadly for itself, Lexus only provides figures for its air suspension when in normal height. It could match or surpass the Range Rover for all we know (but doubt it). As Land Rover does provide figures for the Range Rover's approach and departure angles in normal and Off-Road height, you can get an idea of just how much clearance the new G-Wagen has without any fancy (and expensive to fix) raising and lowering air suspension hardware. In fact, its departure angle is better than even the Range Rover's Off-Road height. Bentley doesn't provide any such information despite touting the Bentayga's surprising off-roading talents.

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

Ares Design Coupe for the Bentley Mulsanne is the grand tourer we dream about

Bentley exited the grand coupe business when it made the last of 550 Brooklands models in 2011. The UK carmaker said it will make 19 examples of the Mulsanne Grand Convertible, but that doesn't count as a coupe. So when a U.S. Mulsanne owner wanted his Bentley with a roof but a touch less four-door-y, he went to Italian coachbuilders Ares Design. And not only did Ares do the thing, they did it magnificently. The resulting two-door is called the Ares Design Coupe for the Bentley Mulsanne, and the first of them was just handed over in Beverly Hills in time for a Pebble Beach appearance. Modena-based Ares started with a three-dimensional scan of the sedan, then reworked that CAD file into the coupe they sought by changing just about everything behind the A-pillars. A reprofiled roof replaces the old one, and it falls into a new backlight and longer rear decklid. The engineers moved the B-pillars rearward to install longer front doors, and fabricated new side impact protection for the portals and rear quarter panels. New chrome surrounds on the windows maintain the look as if from Crewe. Yet because the roof and doors are made from carbon fiber, they contribute to the coupe's 992-pound overall weight loss compared to the donor four-door. Inside, Ares replaced the front seats with more rakish thrones, redesigned the interior trim panels to flow with the body style, and matched the wood and leather as if all were factory original. Under the unchanged hood, a tuned ECU means the 6.75-liter twin-turbo V8 produces more than 591 horsepower and 811 pound-feet of torque, both healthy improvements on the stock 505 hp and 752 lb-ft. Completing the transformation, the coupe sits 20 millimeters lower on "a sportier suspension." One report said that a friend of the California owner likes the car so much that a second two-door has already been commissioned. Ares charges $460,000 for the service, to start, and it takes about six weeks. And no, that price doesn't include the donor Bentley. However, that's a lot less than Bentley would charge to make the swap, since the carmaker won't make the actual car. The Italian firm said it wants to keep volumes "ultra-low," yet, "As long as [Bentley] don't make one, we will continue." Although we haven't spoken much of Ares here outside of their Tesla Model S wagon, the firm led by ex- Lotus boss Dany Bahar has kept busy in its four years of operation.