2012 Continental Gt Mulliner W12, Silver/black, Pristine 1-owner California Car! on 2040-cars

Auto blog

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

Bentley shifting W12 engine production to UK

Who would you think would be the largest producer of 12-cylinder engines in the world? Mercedes? BMW? Ferrari? Think again: as you might have guessed from the headline, it's Bentley. The thing is that, while all Bentley automobiles are manufactured in the UK, its engines aren't: while the 6.75-liter V8 in the Mulsanne is made at home, the innovative 6.0-liter twin-turbo W12 engine in Continental models so equipped (like the newer 4.0-liter twin-turbo V8) is shipped in from Germany. But that won't be the case any longer.
Bentley has just announced that production of the W12 engine is moving to its home base in Crewe by the end of this year. The shift in production (which follows the migration of the Flying Spur from Dresden to Crewe in 2007) will create 100 jobs in the UK - a country which employs some 142,000 workers in the automotive sector - and produce as many as 9,000 engines per year. That in and of itself would account for the vast majority of the 10,000-plus cars Bentley made last year, but will also make Bentley an exporter of engines for the first time in its history.
Right there at the factory, Bentley will fit the engines into twelve-cylinder versions of the Continental GT, GTC and Flying Spur, and send some back to Germany for use in the Audi A8. Applications within the Volkswagen brand itself like the Phaeton and Touareg no longer use the W12 engine, but could conceivably use it again in the future - they'll just have to bring them in from England is all.

2020 Bentley Flying Spur First Edition ratchets up the exclusivity

For the 2020 Bentley Flying Spur's first year of production, the automaker will offer the First Edition model. The sedan adopts a brace of options taken from the standard car, as well as identifying badging. Outside, a set of Union Jacks with a number "1" in the center can be found on the C-pillars, just as were found on the Continental GT First Edition released last year. The words "First Edition" appear on the treadplates, and the sedan sits on 22-inch Mulliner Specification wheels. Up front, the electronic Flying B mascot with illuminated wings retreats to its den inside the grille frame when the car is locked. Inside, the instrument panel gets another Union Jack along with the Bentley Rotating Display. Owners can choose to have the First Edition Bentley Winged Emblems embroidered into the headrests. The panoramic roof and mood lighting come standard, as does Touring Specification, which adds driver assistance features like a head-up display, lane assist, night vision, and adaptive cruise control. The premier example of the breed is set to be auctioned at the Elton John AIDS Foundation's inaugural ball called the Midsummer Party, taking place at Jean Pigozzi's Villa Dorane on July 24, in Cap d'Antibes. All proceeds from the Mulsanne's sale will be given to the EJAF, but the new buyer will still have work to do. A Bentley designer will host the owner in Crewe or travel to the owner's home to spec out the car "through Bentley's exclusive Co-Creation Luxury Service." We're not sure how that's different than Mulliner, but to anyone buying a Bentley in the South of France at an Elton John event, it isn't likely to matter. They'll get whatever they want, including the right to say, "First."