2007 Bentley Continental Gtc on 2040-cars

Auto blog

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

Bentley unveils Rhys Millen's Pikes Peak Continental GT for record attempt

At the end of it all, Rhys Millen might end up owning every Pikes Peak car record that exists. He's time-trialed the perilous mountain road in several wildly different types of vehicles, such as a Hyundai Genesis coupe racecar, the Hyundai RMR PM580-T, the Drive eO PP01 electric racecar, and a Bentley Bentayga. For 2019, Millen's at it again, and he's sticking with his new team at Bentley. On June 30, Millen will gun for the production car record time in a Continental GT. That Millen will drive a Continental GT is not exactly breaking news, as it was first announced in March. However, this is the first time Bentley has shown off the Continental GT's attention-catching Pikes Peak outfit. A matte bright green covers most of the car, with a geometric mountain range crawling up the midsection through the rear. In addition to sponsor stickers from Mobil 1 and Gran Turismo, the GT also wears No. 100 as a nod to the company's 100th anniversary. Millen will try to push the Continental GT from 9,300 feet above sea level to 14,100 feet faster than 10:26.9, the hill climb record for a production car. He'll be working against the GT's 5,985-pound gross vehicle weight, but that shouldn't be a problem with a twin-turbocharged 6.0-liter W12 under the hood. The Continental GT, which will race stock aside from safety equipment, is rated at 626 horsepower at 6,000 rpm and 664 lb-ft of torque at 1,350 rpm. It comes from the dealership claiming a 0-to-60 mph time of 3.6 seconds and a 207-mph top speed. An active all-wheel-drive system and Bentley Dynamic Ride should help Millen keep the car under control during turn after turn after turn up the mountain. If Millen succeeds, it would be a huge victory for Bentley, which would then own the production SUV and car records. Rolls-Royce can't do that.

Bentley unveils the Grand Convertible, a droptop Mulsanne Speed

Five years ago, when Bentley was preparing its farewell shindig for the Arnage, reports were that the Arnage's coupe and convertible siblings, the Brooklands and Azure, would get replacements on the Mulsanne platform. Obviously, that hasn't happened, although we were teased with the Mulsanne Vision Concept in 2012. Then, just this summer, we were again teased with rumors of a Brooklands and Azure one-two punch. While it still hasn't happened yet, Bentley's unveiling of the Grand Convertible seems to have put things in gear.
Not 'merely' a roofless Mulsanne, the Grand Convertible appears to be a droptop Mulsanne Speed, powered by a 6.75-liter engine with 530 horsepower and 811 pound-feet of torque, and fitted with the directional wheels only available on the Mulsanne Speed. Finished outside in Sequin Blue with a "liquid metal" hood and windshield frame and a burl walnut veneer on the tonneau cover - a similar combo used to introduce the Rolls-Royce Phantom Drophead Coupé eight years ago - the cabin is covered in Beluga leather with blue cross-stitching.
Company CEO Wolfgang Dürheimer says Bentley is watching customer reaction to the car, yet the press release says it's been "Developed to signify Bentley's intentions for the future." That sounds like better than even odds we'll be seeing this on the roads. For now, though, you can see it in the high-res gallery above, at the LA Auto Show starting this week, and at Art Basel in Miami after that, and you'll find a bit more info on it in the press release below.