2005 Bentley Continental Gt Coupe. Loaded. Factory 2 Piece Wheels. Like New. on 2040-cars

Auto blog

Bentley starts testing the sold-out, 200-mph Bacalar roadster

Bentley took the limited-edition Bacalar from a sketch to a 200-plus-mph roadster in nine months, a shockingly short amount of time. Its engineers are now putting the first car through its paces at the same break-neck speed. Although the Bacalar is based on the Continental GT, the British firm explained nearly everything the driver will see and feel is specific to the car. Bentley developed over 750 new parts for it, including 40 built with carbon fiber, and the roadster shares no body panels with other members of the company's range. All of these components have to meet the same stringent quality standards as those created for regular-production models. Bentley gave its team 20 weeks to fine-tune the first prototype (pictured), which it calls car zero. Testing started earlier in 2020, so the car has already been put through a wind tunnel and pushed to the limit at triple-digit speeds — it's as stable and quiet as customers expect. Next, test drivers will pile on the miles to see how it holds up over time. They'll then test it at up to 176 degrees, and the final step will be validating the electrical system. Power for the Bacalar comes from a twin-turbocharged 6.0-liter W12 engine, which produces 650 horsepower and 667 pound-feet of torque. It spins the four wheels through an eight-speed automatic transmission. Bentley hasn't revealed what it will do with car zero at the end of the testing phase. Production is scheduled to start in 2021, and the 12 examples planned have already been spoken for. Each one will be unique; buyers will be invited to work directly with the company's design department to configure the interior and the exterior. Related Video:

2020 Bentley Continental GT V8 First Drive Review | 8 is the new baker's dozen

Certain objects are so well known for arriving in groups of twelve that their dodecameralism is almost presumed. This list includes eggs, donuts, roses, inches, hours, months, human ribs, days of Christmas and, correlatively, drummers drumming. We can add to that group the number of cylinders under the hood of a contemporary Bentley. Since 2003, when the venerable British brand rolled out its modern Continental GT, it has sold more than 70,000 of these models, a notable number with an inventive, twin-turbocharged 12-cylinder engine, arrayed in a W configuration. Unfortunately, the flying-B brand has been having some difficulty meeting certification requirements for its alluring, all-new, 12-cylinder-equipped Continental GT coupe and convertible, which have yet to appear in the States, despite a full two years having lapsed since their unveiling. Fortunately, to stem the tide of demand, the crew from Crewe has certified a version of the Porsche-designed 542-horsepower, 568 pound-feet 4.0-liter, twin-turbo V8 from the Panamera for use in their new two-door, backed up by an eight-speed dual-clutch transmission. It will be available for purchase here, this fall — before it is offered to any other market — by those with 220,000 spare dollars. Even more fortunate, we just had the chance to drive it through the coastal, mountainous and curvy vineyard regions of Northern California, and we can assure you that, while we still believe Bentley GTs deserve twelve cylinders, eight is the new baker's dozen. Unless you've spent extended time piloting the Continental GT W12 through some of the most beautiful mountainous regions of Europe and America, as we have, you might not notice the one-third reduction in cylinders, or the 84-horsepower depreciation in output. According to Bentley, the less powerful but lighter motor adds only 0.2 seconds to the 0-60 run (3.8 versus 3.6 for the coupe, 3.9 versus 3.7 for the convertible) not enough of a differential to tip our own internal accelerometer. It also foregoes cresting 200 mph like its bigger brother can, not that there's anywhere you can hit these speeds safely in America anyway. The V8 also, as referenced above, subtracts a couple hundred pounds from the total weight of the GT, not that this matters all that much in a vehicle that weighs 2.5 tons, but it does take a modicum of gravitational pressure off the front axle. Is it noticeable on first blush?

Bentley re-creates one-of-a-kind sports sedan destroyed in 1939

Bentley's Mulliner division specializes in making one-off (or few-off) projects for clients willing to foot the bill. They're the folks you'd want to talk to if you want a long-wheelbase Flying Spur, a Bentayga-based dually pickup, or anything in between. The division only works on new models, but it stepped outside of its comfort zone to re-create a one-of-a-kind Bentley manufactured and destroyed in 1939. The project is part of Bentley's on-going centennial celebration, and finishing it in time was easier said than done. It made building a concept car like the EXP 100 GT look like assembling a Lego kit. The original Corniche disappeared after getting bombed by the German army, and a majority of the people who saw it in person are dead, so the men and women tasked with resurrecting it only had a handful of period, black-and-white photographs and technical drawings to work with. The final product looks stunning, and Bentley claims it's identical to the original in every way. Parts like the chromed headlight bezels, the droplet-shaped fenders, and the wooden dashboard were exclusive to the Corniche, so they had to be manufactured from scratch using the correct materials, and the right production techniques. The British firm could have saved itself the trouble of re-creating this unique part of its history if another car hadn't pulled out in front of it 80 years ago. Bentley made the original Corniche during tumultuous times as it explored the possibility of releasing a more powerful variant of the Mark V scheduled to make its debut in October 1939. It asked French designer Georges Paulin to draw a futuristic, streamlined body, and it commissioned Paris-based coachbuilder Carrosserie Vanvooren to build it using thinner-than-normal steel to save weight. The Corniche lapped the Brooklands track for the first time in May 1939 and quickly reached over 100 mph, an impressive speed at the time. Testing continued in rural France, where the big Bentley blended in as well as a flying saucer. In August 1939, one of the company's test drivers swerved to avoid another car, rolled, and wrapped the aerodynamic front end around an unsuspecting tree. Bentley separated the body and the chassis. It immediately shipped the chassis to its headquarters in Crewe, England, and curiously asked a local shop to repair the body instead of sending it back to Vanvooren in Paris.