2004 Bentley Continental Gt on 2040-cars

Auto blog

2017 Bentley Model Year Preview and Updates

Over the last decade Bentley has done an excellent job in projecting a more sporting presence without in any way jeopardizing its luxury credibility. That luxury cred is again on the line with the launch of Bentley's new Bentayga SUV (pictured); its info is below. BENTLEY BENTAYGA: The biggest news at Bentley – literally and figuratively – is the arrival of Bentley's first SUV, the difficult-to-pronounce but beautifully executed Bentayga. Described as a 'true Bentley', the Bentayga provides expected luxury in combination with unexpected off-road performance. CONTINENTAL: More horsepower – up to 700 horsepower and 750 pound-feet of torque in the Supersports – is provided across the lineup, along with a new Black Edition available for both Coupe and Convertible. FLYING SPUR: A new V8 S model offers enhanced performance and 'sporting' luxury when compared to the more pedestrian V8. MULSANNE: Bentley's big four door receives significant styling revisions to the exterior, new and improved chassis technology and new on-board technology. The new Extended Wheelbase (EWB) adds almost 10-inches of additional rear seat legroom.

Bentley W12 engine production will officially end in April 2024

We knew the Bentley W12 engine had an expiration date before, but it’s going to come up even quicker than expected. Revealed today, Bentley says the last W12 engine it produces will be in April 2024. ThatÂ’s only one year and a couple of months away! Previously, Bentley made it clear that it would only sell PHEVs and EVs by 2026, implying the W12 was done for. It wonÂ’t last long enough to bump into that 2026 limit now that the 2024 production end is set. By the time its end date rolls around, Bentley will have made over 105,000 W12 engines since the 6.0-liter twin-turbocharged unit was introduced for 2003. Each of those engines was hand-built by a team of craftspeople — Bentley says each engine takes approximately 6.5 hours to complete. Which Bentley models are going to be made available with these final W12s, you ask? The real celebration for Bentley is happening with the Batur, a small run of Mulliner coach-built coupes based on the Continental GT. Final validation just wrapped up for the Batur version of the W12, and itÂ’s the most powerful yet at 740 horsepower and 737 pound-feet of torque. Versus the W12 found in other Bentley models, the Batur features reworked intake, exhaust and cooling systems along with a revised engine calibration. Unfortunately, all 18 Baturs (pic below) are already spoken for. If you still want a W12, Bentley says it has limited order slots left for the Continental GT Speed, Bentayga Speed and Flying Spur Speed. Additionally, Bentley will allow you to spec it in either the Continental GT Mulliner or Flying Spur Mulliner. No other new Bentley orders will be W12-compatible between now and production completion. The company warns that there are only a limited number of build slots left, so anyone still on the fence should act quickly if they want the W12.  Over the years, Bentley says the W12 has seen a 37% increase in power, 54% increase in torque and 25% reduction in emissions. The biggest changes came in 2015 when Bentley redesigned the engine “from the sump up” for the launch of the Bentayga SUV. As of today, there are 30 people involved in the engine assembly process. Bentley says it aims to retrain and redeploy all 30 into different positions once W12 production ceases Related video: 2024 Maserati GranTurismo walkaround

The Bentley Mulsanne exits the stage as production ends

Bentley is done with the Mulsanne. The one you’re looking at here is the penultimate car to come out of the factory in Crewe, Cheshire, England. Apparently, the owner of the last one is rather secretive and wants to keep their car under wraps. That being the case, Bentley has surrounded this Tungsten and Rose Gold Mulsanne with all the pomp and circumstance one would expect from the end of an era at Bentley. At least, as much as the pandemic will allow. Bentley employees are pictured here next to the car, standing apart with masks on. ItÂ’s one of the Mulsanne 6.75 Edition cars Bentley previously announced, which the company limited to just 30 units. The end of the Mulsanne also means the end of the 6.75-liter V8 at Bentley. We gave that engine its own sendoff post, but needless to say, the engine series is an old one and can be traced back to 1959. BentleyÂ’s Mulsanne is much less old. This flagship sedan was introduced at Pebble Beach in 2009, and has been in production ever since. Bentley has given it a couple rounds of updates, with the addition of the faster Mulsanne Speed in 2015, along with a design and tech refresh in 2016. Bentley built just over 7,300 total Mulsannes, and itÂ’s released a few eye-popping production stats. In the end, about 700 people were part of the production process to build the Mulsanne, putting in nearly 3 million total hours. Over a million total hours have been spent creating the interiors, and nearly 90,000 hours have been spent polishing the cars.  “I am immensely proud of the hundreds of designers, engineers and craftspeople that brought the Mulsanne to life over the last 10 years,” said Adrian Hallmark, Bentley CEO. “Now, as we begin BentleyÂ’s journey to define the future of sustainable luxury mobility through our Beyond100 strategy, the role of Bentley flagship is passed to the new Flying Spur.” ThatÂ’s right, the Flying Spur is the new flagship for the time being. Though, the latest rumors point to Bentley making a gigantic SUV as its future flagship vehicle to properly replace the Mulsanne. Is anybody surprised? Related video: