1 Owner Beluga Beluga Low Miles Call Roland Kantor 847-343-2721 on 2040-cars

Auto blog

Bentley teases restyled production SUV

Bentley insists that customers responded positively, but journalists weren't particularly enamored with the EXP 9 F concept when it was unveiled two years ago at the Geneva Motor Show. And so it went back to the drawing board, honing the design to make it more pleasing to the eye.
The production model won't hit the road until 2016, but at its annual shareholders meeting today in London, the British automaker revealed the first image of the finished design - or at least the front end, which was arguably the most controversial element of the design in the first place.
The rendering, as you can see above, is highly stylized and obscured by flying sand (as many customer examples are likely to be in the dunes of the Middle East). But from what we can see, it appears that Bentley has moved the secondary headlights from below the primary ones to beside them. It's hard to tell, but it appears that their place on the edges of the front bumper have been replaced by air vents, giving it an altogether Continental-like front end. The shape of the grille, hood, fenders and greenhouse otherwise appear similar to the EXP 9 F we've already seen, though the air dam appears taller than the concept's.

2022 Bentley Flying Spur Hybrid has pure electric range, near-V8 performance

Bentley is adding the new 2022 Flying Spur Hybrid as a third powertrain option in the Flying Spur family that already includes a W12 and V8 model. It’s BentleyÂ’s second hybrid vehicle, joining the Bentayga Hybrid in the companyÂ’s rollout of slightly greener vehicles. This Flying Spur PHEV is the result of borrowing powertrain components from Porsche for its powertrain components. A 2.9-liter twin-turbo V6 and electric motor combine for a total system output of 536 horsepower and 553 pound-feet of torque. The horsepower is slightly down from the Panamera 4S E-Hybrid, but its 553 pound-feet of torque is identical to the Porsche from which its powertrain is derived from. This motivates the Flying Spur Hybrid from 0-60 mph in just 4.1 seconds, which is just 0.1 second slower than the V8. Top speed is an impressive 177 mph. ThereÂ’s nothing slow about it. As for the electrics, Bentley is using a 14.1 kWh battery pack. Tested on the optimistic WLTP test cycle, Bentley predicts itÂ’ll have a range rating greater than 25 miles. The Porsche Panamera 4 E-Hybrid with the same size battery pack (2020 model, because the 2021 Panamera got a bigger battery pack) is EPA-rated for 14 miles on a full charge, so we suspect the Flying Spur will be closer to this total when it receives its EPA rating. YouÂ’ll be able to choose between pure EV mode, Hybrid Mode or Hold Mode (retains current battery charge) depending on how you wish to utilize the battery charge on your drive. A new dedicated button on the interior facilitates these mode changes, and besides the necessary hybrid-specific infotainment software and cluster layout, is the only physical change to the interior. Hybrid models will be recognizable via their small “Hybrid” badge on the front fender. TheyÂ’ll also have new quad oval tailpipes and a charging port on the left rear fender. Fuel economy figures are not yet available from Bentley, but if the Panamera it shares powertrains with is any indication, we may not see massive gains by going from the V8 to the V6 hybrid. Porsche gains only 1 mpg going from the Turbo to a 4S E-Hybrid, so a similar 1- or 2-mpg bump from the V8Â’s 17 mpg combined figure seems likely. A total driving range of 435 miles is expected with this Hybrid model, which Bentley claims is the best in its lineup. Pricing isnÂ’t out yet, but Bentley says youÂ’ll be able to place an order for a Flying Spur Hybrid this summer. The first customer deliveries are scheduled for the end of 2021.

Bentley Speed Six Continuation Series revealed at Goodwood Festival of Speed

The Bentley Continuation series of cars is … continuing. Today, Bentley unveiled the Speed Six Continuation Series at the Goodwood Festival of Speed. This follows the series of 12 Bentley Blower Continuation models, but apologies youÂ’re only hearing about the new series now, as the 12 Speed Six units are already spoken for. Bentley says it regards the Speed Six as its most successful race car ever because it dominated Le Mans both in 1929 and again in 1930. Just like the Blower, the Speed Six will be built using the same processes as the original car by BentleyÂ’s bespoke and coachbuilding division, Mulliner. Bentley has 80% of the carÂ’s original drawings and is supplementing this knowledge with original mechanicÂ’s notes and data taken from an original 1930 Le Mans racer and a 1930 Speed Six currently residing in BentleyÂ’s Heritage Collection. The “6 1/2 liter” (as Bentley likes to term it) six-cylinder engine required the creation of over 600 new parts to build, and Bentley says initial dyno testing shows itÂ’s making 205 horsepower, which is 5 horses more than the original race engines were documented to produce. Bentley originally put this engine together as a successor to the Blower motor, as the thinking at the time from W.O. Bentley was that increasing displacement would produce better results than supercharging. Every last detail of the Speed Six Continuation Series is scrutinized to be as authentic as possible to the original. The one youÂ’re looking at in photos here is finished in Parsons Napier Green and features a tan leather interior. A total of five authentic colors will be available for the buyers to choose from, too. The craftspeople building the cars will be working alongside younger folks on purpose in an effort to pass down the skills and techniques used to create such vehicles. Before a single screw is turned, though, Bentley says it will be putting “Car Zero” through a real-world durability program with a goal of over 21,000 miles on the road and nearly 5,000 miles on the racetrack. Will any of the 12 customers ever get close to those figures? It sure would be cool if they did. As for those 12 lucky people who will own one of these Speed Six Continuation Series cars, theyÂ’ll all have custom sessions with the Mulliner team to get their cars customized and built to their specific wants. Each Speed Six will then take 10 months from start to finish to complete, and Bentley thinks production will be completed by the end of 2025.