2013 Bentley Continental Flying Spur White On Black Only 8k Miles on 2040-cars

Auto blog

Bentley W12 engine production will officially end in April 2024

We knew the Bentley W12 engine had an expiration date before, but it’s going to come up even quicker than expected. Revealed today, Bentley says the last W12 engine it produces will be in April 2024. ThatÂ’s only one year and a couple of months away! Previously, Bentley made it clear that it would only sell PHEVs and EVs by 2026, implying the W12 was done for. It wonÂ’t last long enough to bump into that 2026 limit now that the 2024 production end is set. By the time its end date rolls around, Bentley will have made over 105,000 W12 engines since the 6.0-liter twin-turbocharged unit was introduced for 2003. Each of those engines was hand-built by a team of craftspeople — Bentley says each engine takes approximately 6.5 hours to complete. Which Bentley models are going to be made available with these final W12s, you ask? The real celebration for Bentley is happening with the Batur, a small run of Mulliner coach-built coupes based on the Continental GT. Final validation just wrapped up for the Batur version of the W12, and itÂ’s the most powerful yet at 740 horsepower and 737 pound-feet of torque. Versus the W12 found in other Bentley models, the Batur features reworked intake, exhaust and cooling systems along with a revised engine calibration. Unfortunately, all 18 Baturs (pic below) are already spoken for. If you still want a W12, Bentley says it has limited order slots left for the Continental GT Speed, Bentayga Speed and Flying Spur Speed. Additionally, Bentley will allow you to spec it in either the Continental GT Mulliner or Flying Spur Mulliner. No other new Bentley orders will be W12-compatible between now and production completion. The company warns that there are only a limited number of build slots left, so anyone still on the fence should act quickly if they want the W12.  Over the years, Bentley says the W12 has seen a 37% increase in power, 54% increase in torque and 25% reduction in emissions. The biggest changes came in 2015 when Bentley redesigned the engine “from the sump up” for the launch of the Bentayga SUV. As of today, there are 30 people involved in the engine assembly process. Bentley says it aims to retrain and redeploy all 30 into different positions once W12 production ceases Related video: 2024 Maserati GranTurismo walkaround

Bentley builds its final 6.75-liter V8, ending a 61-year production run

Bentley has just finished its very last 6.75-liter V8. While engines come and go, this is significant because Bentley has been building this engine, known as the L-series, for 61 years. This final engine will go in the 30th and last Bentley Mulsanne, a 6.75 Edition by Mulliner, marking the end of the flagship sedan. The L-series engine was first introduced in 1959, and according to Bentley, it was developed in order to develop more power than its existing inline-six without adding weight or taking up more space. The engine in fact weighed 30 pounds less than the six-cylinder, and it made about 180 horsepower. That original engine "only" had 6.2-liters of displacement, and it wasn't until 1971 that it would reach 6.75 liters thanks to increased stroke. This final version of the engine is significantly different from its fuel injection to its twin-turbochargers, but is based on the same design. And with 530 horsepower and 811 pound-feet of torque, it's the most powerful iteration of the engine. At 61 years, the Bentley engine is arguably the V8 with the longest production run. While the first-generation Chevy small block V8 was introduced earlier for the 1955 model year and is still built in crate engine form, GM stopped using it in production cars in 2002. Far fewer Bentley engines were built, though, with a total over 36,000, as opposed to the millions of Chevy small blocks in the world. Of course, volume is sort of the antithesis of what makes a Bentley a Bentley. With the 6.75-liter engine out of production, all of Bentley's engines are derived from VW Group engines, from its W12 to the plug-in hybrid V6. Related Video:    

Autoblog Podcast #417

Episode #417 of the Autoblog Podcast is here, and this week, Dan Roth, Steven Ewing, and Brandon Turkus talk about what we're expecting to see at the upcoming 2015 Chicago Auto Show that kicks off on February 12. Of course, the podcast starts with what's in the garage and finishes up with some of your questions, and for those of you who hung with us live on our UStream channel, thanks for taking the time. Check out the rundown with times for topics, and you can follow along down below with our Q&A. Thanks for listening! Autoblog Podcast #417 The video meant to be presented here is no longer available. Sorry for the inconvenience. Topics 2015 Chicago Auto Show In The Autoblog Garage 2015 Bentley Continental GT Speed 2014 Ford F-150 Tremor Long-Term 2015 Volkswagen GTI Long-Term 2014 Jeep Cherokee Hosts: Dan Roth, Steven Ewing, Brandon Turkus Runtime: 01:25:53 Rundown Intro and Garage – 00:00 Chicago show – 27:37 Q&A – 47:27 Get The Podcast UStream – Listen live on Mondays at 10 PM Eastern at UStream iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Feedback Email – Podcast at Autoblog dot com Review the show in iTunes