2006 Bentley T on 2040-cars

Auto blog

Bentley Mulliner Batur celebrates the W12, previews EV style

Bentley has revealed its second special Mulliner coach-built model, and it represents a crossroads for the brand. It's called the Bentley Mulliner Batur, and it's a sendoff for the core engine for Bentley, the twin-turbo W12. It's also a sign of things to come. The styling you see here will be adapted for Bentley's future electric cars. The car is clearly Bentley right from the get-go. It has the long front end, the prominent, rounded rectangular grille, rearward placed cabin and wide, flowing rear fenders. But it has a more aggressive look than some recent Bentleys. The grille looks as though it's leaning more forward. Instead of round headlights, it has sweptback units that look like eagle eyes. The rear glass, instead of kicking up, stays low along the belt line. The tail has almost a boattail look and has slender taillights. It's Bentley, but it's also new. The inside is clearly closely related to the Continental GT, which is no bad thing. But it can be set apart with special materials. Buyers of the Batur will have the ability to customize almost every aspect of the car with different leathers from different locations, different interior trimmings and upholstery designs. Bentley is offering some very unique materials, too. Metal pieces such as the organ stop vent switches can be made from titanium or even 3D-printed 18-karat gold. Some of the interior trim can be made from a natural fiber composite, which is like carbon fiber, but made from naturally occurring fibers rather than synthetically created carbon. The natural fiber can be used for the front splitter, side skirts and rear diffuser as well. And of course the exterior can be customized with just about any paint and graphics imaginable. Bentley says that the Batur is powered by the most powerful iteration of the twin-turbo 6.0-liter W12 yet. It makes 730 horsepower and 738 pound-feet of torque. It's paired with adaptive air suspension, active anti-roll bars, all-wheel drive, four-wheel steering, an electronic limited-slip differential and torque vectoring to help it handle as well as it can go in a straight line. Stopping it are a set of carbon silicon carbide brakes with 10-piston front brake calipers and four-piston rears. Only 18 Baturs will be built, and they're all spoken for. Pricing started at 1.65 million British pounds, or $1.95 million. Though there will only be a few of these Baturs, keep an eye out for its design to show up in the Bentley EVs that are coming starting in 2025.

Bentley Mulsanne EWB China Edition ironically celebrates London

Bentley's versed in special editions for China, although it's been a while since we last saw one. In 2010, the English automaker released the Continental GT Design Series China and Flying Spur Speed China, following that up a year later with the Linley Continental Flying Spur that was limited to a mere 10 units. This time around, 15 Chinese buyers get the chance to order the Bentley Mulsanne Extended Wheelbase China Edition in any color they want so long as it's black. This being a product of Bentley's Mulliner bespoke division, though, buyers do get a choice of two special blacks. Onyx black imbues the abyssal shade with "a hint of dark blue" as well as darker tones, resulting in the "deepest black finish offered by Bentley." Mulsanne shoppers who like their blacks a bit more uplifting should opt for Black Velvet, said to be "a richer black-based finish" shot through with red pigments, creating a color recalling black cherries. Both hues are hand-applied, as is the gold fine line running along the Mulsanne's shoulder. Further exterior highlights comprise the chrome Serenity grille with a double-diamond quilt pattern, a Union Jack on the C-pillar, 21-inch and 14-spoke polished Radiance wheels, exclusive welcome lamps, and polished, stainless steel Mulliner sill plates.  Three vogue, two-tone interiors will be available, in either Fireglow with Imperial Blue, Newmarket Tan with Burnt Oak, or Shortbread with Redwood. Crewe artists embroidered the hide covering each seat with "an expressive interpretation" of London's skyline that includes widely recognizable sights: Tower Bridge, the London Eye Ferris wheel, the Shard and Gherkin towers, and The O2 arena. The same design is inlaid into the chosen veneer on the passenger's side.   The 6.75-liter turbocharged V8 with 506 hp and 752 pound-feet of torque goes untouched. Bentley will share pricing only with the 15 souls ready to purchase, but the standard sedan starts at more than 5 million yuan, or almost $750,000 American. Buyers would be advised to have a Bentayga on hand to convey the funds to the dealership.

2021 Bentley Flying Spur Speed spied undisguised, may be PHEV

The 2020 Bentley Flying Spur luxury sedan was just revealed a few months ago, but its high-performance Speed variant should be launching very soon. One of our spy photographers caught what appears to be a Flying Spur Speed completely undisguised. It follows the pattern of past Speed models in terms of style, but it may be powered by a hybrid powertrain, which would be a first for the Speed line. When it comes to the design, the Flying Spur Speed is quite subtle. The body is pretty much untouched except for the black mesh grilles. All the chrome trim has been changed over to gloss black as well, just as previous Speed models have done. At the back, the car now features quad exhaust tips that exit through the oval outlets in the bumper. The exterior also leads us to believe this is a hybrid. Looking closely at the back, you can see the factory fuel filler door nestled in the top of the right rear fender. Looking over to the left rear fender, you can just make out yet another small filler door ahead of the taillight. This door doesn't appear on the regular Flying Spur, so we believe it's an electric charger port door. The question is, what hybrid powertrain could it be using? It's likely not using the V6 hybrid from the Bentayga, since we've established that this is a Flying Spur Speed, but Bentley doesn't have any other plug-in hybrid powertrains at the moment. It's possible it could use a version of the Porsche Panamera Turbo S E-Hybrid V8 powertrain, which makes 677 horsepower and 626 pound-feet of torque. That would be more power than the regular Flying Spur's W12, if a bit less torque. And of course Bentley could probably tweak it for a bit more power. Then again, maybe Bentley will adapt some hybrid tech to its W12. Whatever the case may be, this should be a very interesting car. And since this is just a high-performance variant that's clearly pretty far in development, we should see it officially revealed soon. It would make sense for it to be launched for the 2021 model year and shown within a year.