Coupe 4.0l Nav Cd 8 Speakers Audio Memory Dvd-audio Mp3 Decoder Air Conditioning on 2040-cars

Auto blog

Now you can order a Bentley with real stone trim

Order up a new Bentley and you'll have some choices to make. After choosing which model, you'll need to select from over a hundred standard exterior paint colors and a staggering array of trim options – and now, interior stone veneers. Mulliner will now outfit your Bentley with actual stone trim. Now we know what you're probably thinking: stone adds weight. But here's the kicker: Bentley's new stone veneers measure just 0.004 inches thick. That's less than the breadth of a human hair, and (according to the automaker) makes these trim pieces not only very lightweight, but also translucent. The rocks are sourced from quaries in India, cured using fiberglass and resin, and finished by the Mulliner coachbuilding team back at the factory in Crewe, England. Customers will be able to select between a natural finish or in four tints to install on a new Continental or Flying Spur. So if you were hoping for a little extra ballast in your 5,300-lb Bentayga or 6,000-lbs Mulsanne, we're afraid you'll just have to choose a different interior accent. STONE VENEERS BY MULLINER – THE NEXT LEVEL OF MODERN BRITISH LUXURY - Bentley pushes boundaries of cabin luxury with new and rare materials - Lightweight and contemporary feature developed by Mulliner - Four exclusive colours: Galaxy, Autumn White, Terra Red and Copper (Crewe, 04 January, 2016) Bentley Motors' bespoke coach-building division, Mulliner, is introducing the next level of modern British automotive luxury – stone veneers. This innovative interior finish utilises state-of-the-art stone veneer technology to make a luxurious, contemporary feature of a natural product formed over 200 million years. The slate and quartzite stone is sustainably sourced from hand-selected quarries in Rajasthan and Andhra Pradesh, India – a nation with an ancient and rich culture of stone masonry. The sections of stone are split from larger pieces and cured using glass fibre and a bespoke resin. Finally, they are shaped and hand finished by Bentley's world-renowned Mulliner coachbuilding team at the company's headquarters in Crewe, England. The stone surfaces of the veneers are just 0.1 mm thick, meaning that they are both extremely light and translucent, allowing the elegant grain and pattern in the stone to be visible to the interior occupants.

Bentley, Lamborghini consider foreign production [w/poll]

Would a Bentley be a Bentley if it weren't manufactured in Great Britain? Would a Lamborghini be a Lamborghini if it were built outside of Italy? It may be hard to say either way, but we might find out sooner than later, because the latest word coming in from Europe is that the Volkswagen Group is considering expanding production for both these upscale brands outside their traditional homes.
According to the Autovisie section of Dutch newspaper De Telegraaf, the issue for both automakers comes down to their ambitious expansion programs. Both Bentley and Lamborghini plan to launch new SUVs - the former's being well under way, the latter's still awaiting approval - that would expand their annual production considerably: by 50 percent in Bentley's case, and by as much as 100 percent in Lamborghini's.
For now, both marques intend to handle the added production with additional assembly lines at their current facilities in Crewe and Sant'Agata Bolognese, respectively. But both could soon outgrow their relatively small plants - and with the Volkswagen Group operating countless factories across Europe and around the world, it wouldn't be hard to see these manufacturers shifting excess production outside of their home countries.

Porsche recalling 24,500 Panameras for a potential HVAC coolant pump issue

A possible coolant pump problem for the HVAC system is causing Porsche to recall 24,467 units of the Panamera from the 2017 to 2020 model years. Bentley's recalling 650 examples of the sibling 2020 Continental GT for the same issue. Porsche was notified of a malfunction in the external heat pump for the Panamera's climate control in December 2022. An automaker investigation found that it's possible for excess humidity or even liquid to get past the pump seals and short out the pump's circuit board and connector. In rare instances, the malfunction could cause a fire. This can happen even when the engine is turned off because the cars in question are equipped with a residual heat function that keeps warming the cabin after shutdown. Panameras built after July 26, 2021 were fitted with a different pump. The Stuttgart carmaker's field analysis showed "a very small number of instances of thermal damage possibly attributable to this issue." Bentley changed the part in July 2019 to a model with a pressure compensation seal. Porsche said it will begin notifying owners on March 27. It also said it will reimburse any Panamera owners who have paid to have the part fixed previous to this recall. The fix is a trip to the dealer for a new pump with better sealing, sourced from a new supplier. Bentley will begin notifying owners on the same day. In Bentley's case, though, the automaker says "A hardware change will be required but the final solution is currently under investigation and cannot be confirmed at this time." Since the automaker moved to a new pump that isn't part of the recall population, we aren't sure why a resolution remains under investigation. Porsche owners can contact Porsche customer service at 800-767-7243 and refer to internal recall number APA1. Bentley owners can call 800-777-6923 and refer to RE23/02 (RC67). Anyone in that group can go straight to the National Highway Transportation Safety Administration at 888-327-4236 (TTY 1-800-424-9153) or nhtsa.gov, citing campaign number 23V033 for the Panamera or 23V034 for the Bentley. Related video: