2010 Bentley Continental Supersports Low Miles Comfort Seats on 2040-cars

Auto blog

Bentley reveals Continental GT V8 S with a bit more of everything

A Bentley seldom lacks for power, but the entry-level, V8-powered Continental GT and GTC will be getting just a bit more when the doors open at the 2013 Frankfurt Motor Show. The 4.0-liter twin-turbocharged V8 in the new Continental GT V8 S and GTC V8 S has been upgraded by 21 horsepower and 15 pound-feet of torque to bring output up to 521 hp and 502 lb-ft. That's no earth-shattering boost, but when you're dealing with a car that weighs over 5,000 pounds, ever little bit helps.
In a rare best-of-both worlds scenario, Bentley has managed to squeeze the extra thrust out of the Audi-derived engine without sacrificing fuel economy, enabling the new V8 S models to cover the same 500 miles on a full tank as the existing Continental GT V8. But the crew from Crewe didn't stop there: they also lowered the suspension by ten millimeters (0.39 inches), stiffened the spring rates by 45% up front and 33% in the rear, tweaked the dampers, fitted a stiffer rear sway bar and recalibrated the stability control, all in the aim of providing a more assertive, engaging driving experience.
The revised models can be identified by their tweaked front and rear fascias, black grille and unique 20-inch wheels. As of right now, it's not clear how much the V8 S will cost over the standard eight-pot Conti, but then Bentleys don't come cheap in the first place. Deliveries are set to begin early in 2014, by which time we hope to have more specifics on price and availability.

Bentley Continental GT3 Pikes Peak car's wheel can be used for games

As video games become ever more realistic, the lines between driving real cars and their virtual counterparts gets blurrier. And that line is at its blurriest with the steering wheel used in the Bentley Continental GT3 Pikes Peak race car. Not only is it a wheel for the race car, but it can be used for playing racing simulators, too. Bentley collaborated with video game steering wheel manufacturer Fanatec to make the unit for the Pikes Peak racer. It's impressive simply as a car wheel, as it's made from magnesium and carbon fiber. The grips are covered in Alcantara, including the removable lower section designed to give the driver more leverage around hairpins. The rotary switches are CNC-machined aluminum with Bentley's knurling design. In the middle of it all are LED rpm indicators and a 3.4-inch circular display that shows current gear selection and driver settings. But a quick disconnect from the Bentley's steering column, and wheel can be carried over to a Fanatec steering wheel base and reconnected for virtual fun. In this setup, the screen can show various in-game telemetry and information, and the buttons can be programmed for various functions. Though availability and pricing haven't been announced, you'll be able to purchase your own example of this wheel. Considering the materials and functionality, it will probably be quite pricey, but certainly one of the more unique and usable automotive collectibles ever created. Even if you don't want to use it for video games, it comes with a stand that turns it into a display piece, and the center screen can act as a watch or show map and telemetry from laps of race tracks. We suspect you could also use it as an actual steering wheel in a car, assuming you have a compatible quick release. Though, depending on the car, you might not be able to use all the switches, paddles or even the screen. Still, it would be cool and probably a quality piece. Related Video:

Bentley Azure could return for limited edition

Once upon a time, Bentley had two convertibles in its lineup – there was the Continental GTC, which you can still enjoy today, and the Azure, which you can't. The bigger offering, based on the Arnage sedan, went out of production several years back, much to the disappointment of those with ostentatious tastes and bottomless pockets. But if Wolfgang Durheimer has his way, the 20-plus-year-old nameplate could return in a limited run based on the Mulsanne. The last Azure demanded ridiculous wealth to purchase, but this new model would be on an entirely different level. According to Car and Driver, Durheimer said a reborn Azure "would be built in [a batch of] 20 units and sold to absolute connoisseurs at a very high price." He stopped short of actually confirming the vehicle or its cost, but that hasn't stopped Car and Driver from suggesting a price of $1 to $1.5 million per vehicle. The timing here is fascinating, largely because Bentley's arch-rival, Rolls-Royce, is preparing to phase out its Phantom Drophead Coupe – the Mulsanne Convertible's most natural rival – due to slow sales. Whatever this limited-edition vehicle is called, it'd be all on its own. This is not the first time this particular rumor has cropped up. In his first tour as Bentley CEO, Durheimer brought a full-size convertible, called the Mulsanne Vision (shown above) to Pebble Beach in 2012. The idea was shelved by his successor, Wolfgang Schreiber, in 2013. But with Durheimer back in his old position in Crewe (and heading up efforts at Bugatti, too), it wasn't long before Bentley was back in the convertible Mulsanne game with the Grand Convertible, a Speed-based droptop. When the Grand Convertible debuted, we said the company is "watching customer reaction to the car." And the press release says the luxury droptop was "developed to signify Bentley's intentions for the future." Consider this most recent story a reinforcement of that report, then. News Source: Car and DriverImage Credit: Bentley Bentley Convertible Luxury Performance wolfgang durheimer bentley azure bentley grand convertible