2008 Bentley Continental Gtc, Stunning Color Combo, Silverlake/ivory, Pristine!! on 2040-cars

Auto blog

Now you can order a Bentley with real stone trim

Order up a new Bentley and you'll have some choices to make. After choosing which model, you'll need to select from over a hundred standard exterior paint colors and a staggering array of trim options – and now, interior stone veneers. Mulliner will now outfit your Bentley with actual stone trim. Now we know what you're probably thinking: stone adds weight. But here's the kicker: Bentley's new stone veneers measure just 0.004 inches thick. That's less than the breadth of a human hair, and (according to the automaker) makes these trim pieces not only very lightweight, but also translucent. The rocks are sourced from quaries in India, cured using fiberglass and resin, and finished by the Mulliner coachbuilding team back at the factory in Crewe, England. Customers will be able to select between a natural finish or in four tints to install on a new Continental or Flying Spur. So if you were hoping for a little extra ballast in your 5,300-lb Bentayga or 6,000-lbs Mulsanne, we're afraid you'll just have to choose a different interior accent. STONE VENEERS BY MULLINER – THE NEXT LEVEL OF MODERN BRITISH LUXURY - Bentley pushes boundaries of cabin luxury with new and rare materials - Lightweight and contemporary feature developed by Mulliner - Four exclusive colours: Galaxy, Autumn White, Terra Red and Copper (Crewe, 04 January, 2016) Bentley Motors' bespoke coach-building division, Mulliner, is introducing the next level of modern British automotive luxury – stone veneers. This innovative interior finish utilises state-of-the-art stone veneer technology to make a luxurious, contemporary feature of a natural product formed over 200 million years. The slate and quartzite stone is sustainably sourced from hand-selected quarries in Rajasthan and Andhra Pradesh, India – a nation with an ancient and rich culture of stone masonry. The sections of stone are split from larger pieces and cured using glass fibre and a bespoke resin. Finally, they are shaped and hand finished by Bentley's world-renowned Mulliner coachbuilding team at the company's headquarters in Crewe, England. The stone surfaces of the veneers are just 0.1 mm thick, meaning that they are both extremely light and translucent, allowing the elegant grain and pattern in the stone to be visible to the interior occupants.

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

VW may make Bentley a subsidiary of Audi

FRANKFURT — Volkswagen plans to make British luxury carmaker Bentley a subsidiary of its Audi division as it seeks economies of scale among its top-end brands, German trade publication Automobilwoche reported. Bentley, for now overseen by the head of VW's Porsche business, Oliver Blume, will from next year be part of Audi, where VW group Chief Executive Herbert Diess believes it has more potential, Automobilwoche cited company sources as saying. Synergies could include using Audi technology for a new Bentley SUV, it added. Volkswagen, which declined to comment on the report, is reviewing the future of its high-performance brands Lamborghini, Bugatti and Ducati motorcycles as part of broader quest for more economies of scale as it shifts to mass producing electric cars. Sources familiar with the matter told Reuters this month that Volkswagen was working on plans to prepare Lamborghini for a stock market listing. Related Video: Audi Bentley Volkswagen