2008 Bentley Continental Gtc, Only 5800 Miles, 1-owner, Pristine Car! 07, 09, 10 on 2040-cars

Auto blog

First new Bentley Blower built since 1930 is now being tested

Just over a year after announcing the program, Bentley has finished building its first Blower car since 1930. It's called "Car Zero" since it's not one of the 12 customer cars. Instead, this first car is a prototype that will undergo testing before the customer cars begin production. Bentley says this car took 40,000 hours to complete. The company figured out how to build it based on existing tooling and blueprints, as well as laser scans of the components in the company's 1929 race car on which the continuation models will be based. The company collaborated with a variety of outside companies for help with the frame, radiator shroud and leaf springs. The frame was built by a company that builds and restores boilers for steam engines. Bentley itself also built a custom stand so it could hook up the recreated 4.5-liter supercharged four-cylinder to its modern-day engine dynamometers for break-in. Now that this prototype has been completed, Bentley will begin testing it for durability. The planned testing should recreate just under 22,000 miles of regular driving and nearly 5,000 miles of track driving. The company will also do a top speed run with it. Once testing is complete, Bentley will start building the 12 customer cars, all of which have been sold and specified. While many are likely excited about this new Bentley, there are a handful of car enthusiasts that probably don't share the excitement. Earlier this year, several of these wealthy enthusiasts, including fashion mogul Ralph Lauren, sent a letter to Bentley expressing concerns that these continuation cars will reduce the value, both monetary and intrinsic, of the original cars. The complaint obviously hasn't had an effect on Bentley's plans. Related Video:

Bentley's Ultra Performance Hybrid succeeds the 6.0-liter W12

The twin-turbo 6.0-liter W12 engine composed the soundtrack to dreams around the world once it found a home in the Bentley Continental GT, which entered a production in 2003. That engine will sing its final encore in the Bentley Batur Convertible before the curtain comes down, tuned to its highest-ever output of 739 horsepower and 738 pound-feet of torque. The Englanders in Crewe have lifted the hood on the successor, without providing all the details. What we know for now is that the powerplant debuting this summer is called the Ultra Performance Hybrid, a V8 PHEV with "more than 750 PS combined output" and an all-electric range of 50 miles on the WLTP cycle.   We haven't been given a displacement figure, nor did Bentley use the word "turbo" in its release. However, looking around the Volkswagen Group, the twin-turbo 4.0-liter V8 PHEV in the Porsche Panamera Turbo E-Hybrid and Lamborghini Urus SE seems a solid fit for this application. We're told to expect "the highest output ever offered in a Bentley," Since the 740 hp in the droptop Batur equals 750 PS — achieved without electrical assistance — there's reason to hope for something closer to 800 hp than 750. The Panamera Turbo E-Hybrid makes a combined 670 hp and 680 lb-ft, the Urus SE a combined 800 hp and 699 lb-ft. Both of them also hide a 25.9-kWh battery. [video width="2000" height="720" mp4="https://s.aolcdn.com/os/ab/_cms/2024/05/09084632/bentley-hybrid-sound.mp4"][/video] In the Bentley, the e-motors will also spread torque across a wider swath of the rev band than the non-hybrid W12. The company released a short sound clip, and yep, this things sounds like a Bentley engine, from purr to growl never leaving the basso profondo range. The Ultra Performance Hybrid will take its place at the top of the Bentayga, Continental GT, and Flying Spur ranges before the summer ends. We find out closer to that time what happens to the other engines on the menu, the twin-turbo 4.0-liter non-hybrid V8 and the twin-turbocharged 2.9-liter and 3.0-liter V6 plug-in hybrids for the Flying Spur and Bentayga, respectively. 

Bentley Continental GT3 Pikes Peak car's wheel can be used for games

As video games become ever more realistic, the lines between driving real cars and their virtual counterparts gets blurrier. And that line is at its blurriest with the steering wheel used in the Bentley Continental GT3 Pikes Peak race car. Not only is it a wheel for the race car, but it can be used for playing racing simulators, too. Bentley collaborated with video game steering wheel manufacturer Fanatec to make the unit for the Pikes Peak racer. It's impressive simply as a car wheel, as it's made from magnesium and carbon fiber. The grips are covered in Alcantara, including the removable lower section designed to give the driver more leverage around hairpins. The rotary switches are CNC-machined aluminum with Bentley's knurling design. In the middle of it all are LED rpm indicators and a 3.4-inch circular display that shows current gear selection and driver settings. But a quick disconnect from the Bentley's steering column, and wheel can be carried over to a Fanatec steering wheel base and reconnected for virtual fun. In this setup, the screen can show various in-game telemetry and information, and the buttons can be programmed for various functions. Though availability and pricing haven't been announced, you'll be able to purchase your own example of this wheel. Considering the materials and functionality, it will probably be quite pricey, but certainly one of the more unique and usable automotive collectibles ever created. Even if you don't want to use it for video games, it comes with a stand that turns it into a display piece, and the center screen can act as a watch or show map and telemetry from laps of race tracks. We suspect you could also use it as an actual steering wheel in a car, assuming you have a compatible quick release. Though, depending on the car, you might not be able to use all the switches, paddles or even the screen. Still, it would be cool and probably a quality piece. Related Video: