2007 Bentley Continental Gt on 2040-cars

Auto blog

Bentley W12 engine production will officially end in April 2024

We knew the Bentley W12 engine had an expiration date before, but it’s going to come up even quicker than expected. Revealed today, Bentley says the last W12 engine it produces will be in April 2024. ThatÂ’s only one year and a couple of months away! Previously, Bentley made it clear that it would only sell PHEVs and EVs by 2026, implying the W12 was done for. It wonÂ’t last long enough to bump into that 2026 limit now that the 2024 production end is set. By the time its end date rolls around, Bentley will have made over 105,000 W12 engines since the 6.0-liter twin-turbocharged unit was introduced for 2003. Each of those engines was hand-built by a team of craftspeople — Bentley says each engine takes approximately 6.5 hours to complete. Which Bentley models are going to be made available with these final W12s, you ask? The real celebration for Bentley is happening with the Batur, a small run of Mulliner coach-built coupes based on the Continental GT. Final validation just wrapped up for the Batur version of the W12, and itÂ’s the most powerful yet at 740 horsepower and 737 pound-feet of torque. Versus the W12 found in other Bentley models, the Batur features reworked intake, exhaust and cooling systems along with a revised engine calibration. Unfortunately, all 18 Baturs (pic below) are already spoken for. If you still want a W12, Bentley says it has limited order slots left for the Continental GT Speed, Bentayga Speed and Flying Spur Speed. Additionally, Bentley will allow you to spec it in either the Continental GT Mulliner or Flying Spur Mulliner. No other new Bentley orders will be W12-compatible between now and production completion. The company warns that there are only a limited number of build slots left, so anyone still on the fence should act quickly if they want the W12.  Over the years, Bentley says the W12 has seen a 37% increase in power, 54% increase in torque and 25% reduction in emissions. The biggest changes came in 2015 when Bentley redesigned the engine “from the sump up” for the launch of the Bentayga SUV. As of today, there are 30 people involved in the engine assembly process. Bentley says it aims to retrain and redeploy all 30 into different positions once W12 production ceases Related video: 2024 Maserati GranTurismo walkaround

Bentley Flying Spur V8 S solves the ultimate First World problem

Here's a First World problem if we've ever seen one: You want to get a Bentley Flying Spur, but you can't decide which engine. Well, Bentley has just made your decision even harder by introducing another new version. But we'll make it easier on you by telling you that this is the one you want. Slotting in between the existing V8 and W12 versions of the four-door Continental is the new Flying Spur V8 S. It packs the same 4.0-liter twin-turbo V8 as the base model, but augmented to 521 horsepower. That puts it on par, as you might have guessed, with the Continental GT V8 S coupe. It also puts it closer to the 500 hp of the standard V8 than the 616 hp of the 12-cylinder model, but with less weight in the nose, it promises to handle better. With 590 pound-feet of torque channeled to all four wheels through an eight-speed automatic transmission, the middle child of the Flying Spur range will rocket to 60 in just 4.6 seconds – 0.3 quicker than the base model – and top out at 190 miles per hour. Despite weighing nearly 5,500 pounds, though, features like cylinder deactivation and high-pressure direct injection mean it will still travel for 520 miles before needing to top up and return as much as 20 miles per gallon on the highway by our own EPA standards. Of course it's a Bentley, and it encompasses all the pampering luxury and status-symbol clout associated with the badge. But if you're looking for the luxury sedan you can push through the corners and rocket down the highway – and have the means to acquire one – your new ride may have just arrived. Look for it to make its debut mere weeks from now at the Geneva Motor Show. BENTLEY FLYING SPUR V8 S: THE SPORTING SIDE OF LUXURY - World's most refined V8 performance sedan gets even more power and torque - Outputs increase to 528 PS and 680 Nm; 0-100 km/h time just 4.9 seconds with a top speed of 306 km/h - Revised suspension offers improved body control and handling without sacrificing comfort - Black radiator grille, rear diffuser and new grille insert give V8 S a dramatic and purposeful appearance - Unique exterior colours and interior trim options - New Flying Spur V8 S makes debut at Geneva International Motor Show, 1 to 13 March (Crewe, 17 February 2016) Bentley Motors is today announcing the introduction of a new model to its range – the Flying Spur V8 S.

Tesla Model S Plaid takes first in class at Pikes Peak

Tesla celebrated a victory in the Exhibition class at the 2021 Pikes Peak International Hill Climb Sunday, laying down a 6:57.220 pass on the famous uphill time attack – good enough for 10th place overall – in the hands of pro driver Randy Pobst.  Pobst documented the attempt in the above video and called the Unplugged Performance Model S race car "the most bad-to-the-bone electric car ever made," praising its performance. Note that the race car uses an old-fashioned, round steering wheel ... because it's better. Though this year's climb was held on a course that was shortened due to weather conditions farther up the mountain, Tesla's attempt paid off quite handsomely yet again.  Things were not so rosy for Bentley, which finished second to sister brand Porsche in the Time Attack 1 class. Bentley driver Rhys Millen was hoping to nail down the third and final course record to complete its triple crown with its bonkers Continental GT3 Pikes Peak racer, but Romain Dumas spoiled their fun in the 2019 Porsche 911 GT2RS Clubsport, knocking off the bigger Bentley with a few seconds to spare. Bentley's finish was still strong enough for 4th overall despite the disappointment. Related video: