08 Bentley Gtc * Only 13k Miles * Silver Lake * Wood Veneers * Whls * As New!! on 2040-cars

Auto blog

2022 Bentley Continental GT Speed Convertible puts 208 mph of wind in your hair

The Bentley Continental GT is once again merging the higher-performance capabilities of its Speed trim level with the open-top convertible body style in the new 2022 Bentley Continental GT Speed convertible. The GT Speed convertible's upgrades largely mirror those of the recently unveiled 2022 GT Speed coupe. They start with increased output from Bentley's W12 engine, which has been turned up to 650 horsepower from 626 horsepower in the non-Speed W12 (torque remains unchanged at 664 lb-ft) and given a more characterful exhaust note. The W12 here again pairs with an eight-speed dual-clutch automatic transmission and all-wheel drive, although both have been recalibrated for Speed duty. The transmission spends more time in lower gears, while the all-wheel-drive system has a more rearward torque bias in the various drive modes. The combination is good for a factory-stated 0-to-60-mph time of 3.6 seconds and a top speed of 208 mph. That's 0.1 second and quicker than the standard W12 convertible and 1 mph faster, thus earning the Speed its name. The Speed's chassis also has been upgraded, with four-wheel steering, an electronic limited-slip rear differential, and optional carbon-ceramic disc brakes with 10-piston front and four-piston rear calipers. They join existing Continental GT chassis technologies that include active air suspension, adaptive dampers, and active anti-roll bars powered by a specific 48-volt electric system. Speed-specific 22-inch wheels are offered in a dark-tint finish to match the mesh grille or, alternately, bright silver or gloss black. Special side gills and discrete "Speed" badging complete the modest exterior makeover. The convertible top is offered in a choice of seven colors including an oh-so-British tweed, and there are eight headliner colors. The fully automated roof can be stowed or raised in 19 seconds. The cabin features Alcantara microsuede accents and two-tone leather and Alcantara seating surfaces with diamond-in-diamond pattern stitching and "Speed" logos stitched into the headrests. Piano black trim is standard, but numerous wood veneers can be specced. There are also metal-trimmed pedals. Heated and ventilated seats are on hand, along with a heated steering wheel and heated armrests to maximize the top-down driving season. There's also a standard neck-warmer that is said to be more powerful and also quieter than before.

BMW makes the M4 extra special with a huge wing

BMW has all of the bases covered in its lineup, especially when it comes to its 4 Series models. Don't like going to the track? There's the BMW 430i and 440i, which are available as a coupe and gran coupe. Drivers looking for a track-friendly car that can also be used on the road will be steered toward the M4. BMW even built the hardcore M4 GTS for drivers that spend all of their time on a track. Now, it looks like BMW is trying to bridge the gap between the M4 and the M4 GTS with a special-edition model. Our photographers caught BMW testing an M4 with some extreme aerodynamic components around the Nurburgring. With its aggressive front end, massive wing, and sporty rear diffuser, the prototype M4 appears to be similar to the special-edition M4 Competition Sport that BMW released in Spain. The Spain-only special edition was marketed as a softer version of the M4 GTS with less power and usable rear seats. With a similar look and visible rear seats, this prototype indicates a similar track-focused special edition model. Since the M4 is only a few years old, it's unlikely that BMW is testing a new model, but the automaker could be testing aerodynamic components for a refreshed model down the road. A cheaper, more usable M4 GTS, though, would be the perfect car to round out BMW's current lineup. Related Video:

Audi spearheads development of an ultra-luxurious EV code-named Landjet

The rumors claiming Audi wants to release a model positioned above the A8, and the reports of an ongoing electric car development program called Artemis internally, have seemingly converged. Citing sources inside the carmaker, a German media outlet reported the firm is busily creating a super-luxurious EV code-named Landjet. Audi is leading the development process, but sister companies Bentley and Porsche will reportedly receive their own version of the Landjet. All three models will likely take the form of three-row SUVs with generous dimensions. They'll be so big that none of Audi's production facilities will be able to manufacture them, according to an anonymous insider who spoke with German newspaper Handelsblatt. Luckily, Volkswagen makes vans, too. It's too early to tell what will power the Landjets. Audi assigned some of its most brilliant engineers to Project Artemis, and the technology they develop will permeate the three EVs before trickling down into cheaper models in the group. Expect high performance, a high driving range, and semi-automated driving technology. If the report is accurate, the Landjet vehicles will enter production in Hanover, Germany, by the end of 2024. The facility currently makes the Volkswagen Transporter, which is a direct descendant of the rear-engined Bus sold for decades, and it will start manufacturing the production version of the ID.Buzz concept in the coming years. Volkswagen hasn't commented on the report, and car companies rarely address speculation, but its Commercial Vehicles division released a statement in November 2020 that confirms the Hanover site will begin building SUVs about halfway through the 2020s. It's a major shift for a factory normally tasked with manufacturing vans. "Our main plant in Hanover is becoming the production site for three completely new premium electric vehicles in the Group. These D-SUVs are genuine flagship projects: premium, 100% electric, and highly automated," said Carsten Intra, the head of Volkswagen's Commercial Vehicles division, in a statement. He added the firm will invest about 680 million euros (about $807 million) to build a new assembly line, among other upgrades.