2006 Bentley Continental Gt Flying Spur Sedan 4-door on 2040-cars

Auto blog

2015 Bentley Flying Spur V8

Despite Bentley's reputation as a holier-than-thou, ultra-luxury brand, at the end of the day, the Big B is still a business. As such, ongoing trends like powertrain downsizing and model range expansion are more prevalent at Bentley than ever. Just look at the Continental range - what started as the GT W12 has expanded into the GTC W12, GT V8, GT V8 S, GTC V8, GTC V8 S, GT Speed and GTC Speed. Talk about "have it your way."
But there's good reason for that. So many of these vehicles, despite their hand-crafted, bespoke nature, are all - gasp! - plug-and-play exercises that allow Bentley to appeal to the broadest range of upper-lux buyers, while keeping development costs relatively low. It's a move that's indeed worked, the company managing to post healthy sales increases year after year. And that's only going to get better, following the launch of the Flying Spur sedan last year, not to mention the upcoming, highly anticipated SUV that's in the works. As Kevin Rose, Bentley's member of the board for sales, marketing and aftersales told me recently, "The best years are yet to come."
To further expand an already growing range, I recently hopped a plane to London to experience the second member of the Flying Spur family - the V8. This less-powerful Spur offers better fuel efficiency and a lower staring price, while not compromising any of the brand's core values of luxury and refinement above all. But to paraphrase what executive editor Chris Paukert said when he drove the Conti GT V8 in 2012, this is indeed The Thinking Man's Flying Spur. Here, less really is more.

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

Ares Design Coupe for the Bentley Mulsanne is the grand tourer we dream about

Bentley exited the grand coupe business when it made the last of 550 Brooklands models in 2011. The UK carmaker said it will make 19 examples of the Mulsanne Grand Convertible, but that doesn't count as a coupe. So when a U.S. Mulsanne owner wanted his Bentley with a roof but a touch less four-door-y, he went to Italian coachbuilders Ares Design. And not only did Ares do the thing, they did it magnificently. The resulting two-door is called the Ares Design Coupe for the Bentley Mulsanne, and the first of them was just handed over in Beverly Hills in time for a Pebble Beach appearance. Modena-based Ares started with a three-dimensional scan of the sedan, then reworked that CAD file into the coupe they sought by changing just about everything behind the A-pillars. A reprofiled roof replaces the old one, and it falls into a new backlight and longer rear decklid. The engineers moved the B-pillars rearward to install longer front doors, and fabricated new side impact protection for the portals and rear quarter panels. New chrome surrounds on the windows maintain the look as if from Crewe. Yet because the roof and doors are made from carbon fiber, they contribute to the coupe's 992-pound overall weight loss compared to the donor four-door. Inside, Ares replaced the front seats with more rakish thrones, redesigned the interior trim panels to flow with the body style, and matched the wood and leather as if all were factory original. Under the unchanged hood, a tuned ECU means the 6.75-liter twin-turbo V8 produces more than 591 horsepower and 811 pound-feet of torque, both healthy improvements on the stock 505 hp and 752 lb-ft. Completing the transformation, the coupe sits 20 millimeters lower on "a sportier suspension." One report said that a friend of the California owner likes the car so much that a second two-door has already been commissioned. Ares charges $460,000 for the service, to start, and it takes about six weeks. And no, that price doesn't include the donor Bentley. However, that's a lot less than Bentley would charge to make the swap, since the carmaker won't make the actual car. The Italian firm said it wants to keep volumes "ultra-low," yet, "As long as [Bentley] don't make one, we will continue." Although we haven't spoken much of Ares here outside of their Tesla Model S wagon, the firm led by ex- Lotus boss Dany Bahar has kept busy in its four years of operation.