Prestige Bang Olufsen Drive Select Dynamic Chassis Steering Navigation Leather on 2040-cars

Auto blog

Audi R8 LMS GT4 debuts in New York, a ready-made race car

The new Audi R8 LMS GT4 race car has made its debut at this year's New York Auto Show. Since 2009, the Audi R8 LMS GT3 has been available for customer purchase, but this new model is intended to be even more affordable. LMS GT-class racing is some of the most entertaining out there. Unlike racing series such as Formula 1, NASCAR, or even the World Rally Championship, GTE, GT3, and GT4 cars are still based heavily on cars you can find on dealer lots today. The GT4 class was created to have a true entry-level racing series. Homologation keeps the cars closer to their production counterparts than any of the other GT classes. Engines, bodywork, and suspension are all similar to production versions, though substantially beefed up for racing. In the case of the Audi R8 LMS GT4, more than 60 percent its parts are shared with the R8 coupe. That means parts are plentiful and relatively affordable. There are some significant changes between the production and racing versions. First, the V10 in the road car is actually far more powerful. The R8 LMS GT4 is limited to 495 horsepower, though that can vary slightly to meet different regulations. Also, rather than having Audi's wonderful Quattro all-wheel drive system, the R8 LMS GT4 is rear-wheel drive. Power is sent to the wheels through a seven-speed dual-clutch transmission. Though the car is set to make its debut next month at the Nurburgring 24 Hours, it won't actually be competing until the start of the 2018 season. Audi is simply tuning the car at different tracks before asking for approval at the end of the year. Pricing hasn't been announced, but expect it to fall between the $145,000 of the RS3 LMS and the $450,000 of the R8 LMS GT3. That's not nothing, but in the world of professional racing, it's a relative bargain. Related Video:

Audi 3D-printed this tiny Type C racer, we want to drive it

See this little guy? No, not the one driving – that's Professor Hubert Waltl, Audi's head of production and Volkswagen's chief toolmaker. The thing he's driving, though, is a 1:2 scale replica of the 1936 Auto Union Type C. And it was 3D-printed entirely in house. Not in one piece, mind you. It's too big for that. But the Audi Toolmaking division employed metal printing technology to fabricate all the parts that went into this replica of one of the most dominant of the Silver Arrow grand prix racers of the pre-war era. It's essentially like the pedal car Audi rolled out nine years ago, or the E-Tron concept it showed us nearly five years ago. Only this one uses more advanced manufacturing techniques. Aside from making us want to drive it like nobody's business, the half-sized vehicle serves to showcase the advancements which Audi and the VW Group are making in manufacturing – particularly in the area of 3D printing. The German automaker presently has the technology to print laser-melted layers of metallic powder – either steel or aluminum – with grains measuring half the diameter of a human hair. The equipment can handle objects as large as 7.9 inches high by 9.5 inches wide – which, as small as this little car looks, is still a bit too large to simply print out in one piece. Audi Toolmaking prints "Auto Union Typ C" - Exact model of the "Silver Arrow" from a 3D printer - Audi Board of Management Member for Production Prof. Dr. Hubert Waltl: "This underscores our pioneering role in toolmaking." From powder to a component: With a 3D printer, Audi Toolmaking has produced a model of the historical Grand Prix sports car "Auto Union Typ C" from the year 1936. The company is now examining further possible applications of metal printers for the production of complex components. At the same time, Audi is creating important synergies with toolmaking in other parts of the Volkswagen Group. "We are pushing forward with new manufacturing technologies at Audi Toolmaking and at the Volkswagen Group," stated Prof. Dr. Hubert Waltl, Audi's Board of Management Member for Production and Head of Toolmaking at the Volkswagen Group. "Together with partners in the area of research, we are constantly exploring the boundaries of new processes. One of our goals is to apply metal printers in series production." The Volkswagen Group has a total of 14 toolmaking units in nine countries. Under the leadership of Prof. Dr.

Ward's reveals annual 10 Best Engines list for 2013

Ward's Auto has released its annual 10 Best Engines award winners. The 2013 list covers the full width and breadth of the internal combustion spectrum, from a spate of efficient four-cylinders to the most powerful production V8 on the planet. As always, the entries must be available in a production vehicle in the first quarter of 2013 with an MSRP of less than $55,000. The supercharged 3.0-liter V6 from the Audi S5 held on for the fourth consecutive year, and BMW earned two spots on the list with its turbo 2.0-liter four-cylinder and turbo 3.0-liter inline-six.
Ford pulled in two awards for its 2.0-liter EcoBoost four-cylinder and and the supercharged 5.8-liter V8 from the Shelby GT500. Honda matched BMW and Ford with two wins of its own. Wards awarded the 2.4-liter four-cylinder from the Honda Accord Sport as well as the 3.5-liter V6 from the Honda Accord. Chrysler, General Motors and Subaru each garnered a spot on the list as well for the 3.6-liter V6 in the Ram 1500, the turbo 2.0-liter four-cylinder in the Cadillac ATS and the 2.0-liter four-cylinder the Subaru BRZ, respectively. You can read the full press release below for more information.