2018 Audi Q7 2.0t Premium Plus on 2040-cars

Auto blog

Audi SQ7 TDI packs 48V electric compressor, 664 lb-ft

Take a look at the new Audi SQ7 TDI. It's the first time Audi has done an S performance version of its flagship sport-ute, and packs under the hood a 4.0-liter V8 turbo diesel engine mated to an eight-speed automatic and all-wheel drive. It produces a potent 435 horsepower, and an absolutely bonkers 664 pound-feet of torque. The Audi SQ7 TDI produces a massive 664 lb-ft of torque. Impressive as it is, though, that doesn't even tell the full story. That's enough to make us forget it wasn't there in Geneva. It's also more torque than just about anything the Volkswagen Group makes – short of the Bentley Mulsanne Speed and the new Bugatti Chiron. Not even the Lamborghini Aventador SV or Bentley Continental GT Speed can touch that torque figure. Nor can competition like the Porsche Cayenne S Diesel (with its 385 hp and 627 lb-ft) or the BMW X5 M50d (381 hp and 546 lb-ft). It may not surpass the old twelve-cylinder Q7 6.0 TDI (with its 493 hp and 738 lb-ft), but still trounces the VW Touareg V10 TDI (309 hp and 553 lb-ft) – which was strong enough to tow a jet airplane, while the new SQ7 is fast enough to out-drag one (as you can see from the video below). Impressive as it is, though, that headline-grabbing torque figure doesn't tell the full story. To get there, Audi employed two conventional, sequential turbochargers and a third compressor that – in an industry first that's been a long time coming – is powered electrically. The engineers in Ingolstadt installed a beefier 48-volt electric subsystem to power the electric compressor (among other systems) and its latest valvetrain tech for the first time in a diesel. The result, Audi says, is a lack of any perceptible turbo lag – and a 0-62 time quoted at 4.8 seconds, en route to the typical electronically limited top speed of 155 miles per hour. As if that weren't enough, Audi also equipped the SQ7 TDI with an optional suspension package that coordinates the activities of three systems. There's a differential, a four-wheel steering system, and a clever electromechanical roll stabilization system that employs an electric motor (made possible once again by that 48-volt system) and a three-stage planetary gearbox to keep it all level and improve ride quality over rough surfaces. The sum total is an impressive technological tour de force on Audi's part, but one that we may just have to admire from afar.

Audi Sport Quattro Concept speaks softly, carries a 700-hp stick

As promised, Audi has unveiled its Sport Quattro Concept here at the Frankfurt Motor Show, which takes inspiration from the 2010 Paris Motor Show debut known simply as the Quattro Concept. Both cars clearly seek to draw upon the company's legendary 1980 Ur-Quattro and its closely related Sport Quattro short-wheelbase rally special, yet this concept car looks more production-minded than the 2010 starlet.
Despite its more conservative duds, this handsome and muscular coupe actually packs significantly more power than the 2010 Paris showcar. In fact, it musters 700 horsepower and 590 pound-feet of torque from its plug-in hybrid powertrain, versus the Quattro Concept's more historically appropriate 2.5-liter five-cylinder turbo with 408 hp and 354 lb-ft. We're not going to complain about a twin-turbo 4.0-liter V8 plus an electric motor, nor will we grouse about its 3.7-second 0-62 mph dash, 190-mph top speed or 2.5 liters of fuel per 100 kilometers on the Euro cycle (roughly 94 miles per gallon US).
Stubborn rumors abound that Audi will offer a limited-edition version of this four-place coupe for sale, but for now, the company isn't talking. If such a model is offered, it's expected to cost significantly more than the R8 supercar, which might be a tough sell considering that vehicle's similar performance and more voluptuous - if less practical - shape.

Audi Airomorph is a sleek shape-shifting senior thesis

Eric Kim just graduated from the from the Art Center College of Design in Pasadena, CA, at the end of the spring 2014 semester, and for his senior thesis project he came up with this futuristic Audi endurance racer called the Airomorph. He even got some input Audi designer Kris Vancoppenolle.
The Airomorph imagines a future Audi racer for Le Mans that features adjusting fabric panels to fine-tune the car's aerodynamics as it laps the course - a technology inspired by catamaran racing. "I started from scratch and had the freedom to deliver and execute a white space design for the future," said Kim to Autoblog via email. It's also somewhat similar to the idea behind BMW Gina concept, although Kim says that wasn't an inspiration for his design. The body here is made from a single piece of a silver, expansion-resistant material stretched over a frame underneath. The fabric anchors at the wheels, front and rear section with movable cables, and hydraulic actuators pull the wires to shift the aero as needed.
The actual shape echoes Audi endurance racers from the past and present. In profile, you can easily see the current R18 with its arcing cockpit and fin down the rear. Of course, that's interpreted through a little bit of Blade Runner with the covered wheels sticking out from the body. The front shows the rectangular shapes from the earlier R15. There doesn't appear to be any way to actually see out of the vehicle, though.