Must See!!!! 2002 Audi A6 W/ 20inch Rims Only 103k on 2040-cars

Auto blog

1956 DKW Audi electric van beautifully restored

These days, electric vehicles that make commercial deliveries aren't entirely rare. UPS has a small fleet in California, and at least 5,000 Renault Kangoo Z.E. models are in use by France's national postal service. But the history of this concept is much older. In fact, one of the companies represented by Audi's four rings had an example about 60 years ago. Audi Tradition just completed a full restoration of this blue 1956 DKW Elektro-Wagen to add to the company's collection of historic vehicles. It's quite a rare find because only two are still known to exist. Audi estimates that DKW built about 100 of these electric vans between 1955 and 1962, and they were primarily sold to energy companies, public utilities and battery makers. To create the EV model, DKW took its normal Schnellaster delivery van and replaced the model's two-stroke engine with an electric drivetrain. The vans weren't exactly speedy, though. The motor produced about 6.7 horsepower and lead-acid batteries offered 200 amp hours of power running at 80 volts. It gave the Elektro-Wagen a claimed range of about 50 miles and a 25 mile-per-hour top speed. Following the restoration, Audi took van to the island of Wangerooge in the North Sea to show it off. The location is perfect, too, because vehicles with internal combustion engines are banned on the island. If you can read German, feel free to find out more in the press release below. „DKW Elektro-Wagen" zu Audi heimgekehrt Einen von zwei verbliebenen DKW Elektro Schnellaster restauriert Klein-Bus einst auf der Nordseeinsel Wangerooge im Einsatz Audi Tradition prasentiert einen aussergewohnlichen Neuzugang in seiner historischen Sammlung: einen „DKW Elektro-Wagen" von 1956. Zwischen 1955 und 1962 produzierte die Auto Union GmbH in Ingolstadt DKW Schnellaster – etwa 100 davon als Elektro-Automobile, die das Unternehmen vor allem an Energieunternehmen, Stadtwerke oder Batteriehersteller verkaufte. Bei dem nun nach aufwandiger Restauration „heimgekehrten" Elektro-Schnellaster handelt es sich um ein besonderes Exponat: Der DKW fuhr auf der Nordseeinsel Wangerooge, wo Automobile mit Verbrennungsmotoren verboten sind. Normalerweise war der DKW Schnellaster mit einem Zweitaktmotor ausgestattet - der „Elektro-Wagen" hingegen mit einem funf Kilowatt (kw) leistenden Reihenschluss-Motor. Die seitlich in zwei Kasten gelagerten Bleibatterien hatten eine Nennspannung von 80 Volt und eine Kapazitat von 200 Amperestunden (AH).

Audi looks at the future of transportation for Ender's Game film

The forthcoming science-fiction movie Ender's Game, starring Harrison Ford and Ben Kingsley, takes place in a high-tech world. So if movie-watchers are to be fully immersed in the story, every detail counts. That's why the computer-generated special-effects company assigned to the movie, Digital Domain, enlisted the help of Audi to design a future car that would fit seamlessly in the film's world - part of its $17.2-million investment in the movie.
Audi went all out, with Head of Audi Exterior Studio 1 Frank Rimili and designer Björn Wehrli assigned to the Audi Fleet Shuttle Quattro's design, which is so thorough and cohesive that we wouldn't be surprised to see cars like it on the road three-quarters of a century down the line. Rimili doubts that, but is "absolutely sure" Audi will still be around in 2088.
Watch the making-of video below to see all of the work that went into designing a car that will never see the light of day - in the real world, that is. If you're a fan of science fiction or the novel on which the movie is based, head on over to a theater to watch Ender's Game, which opens on Friday.

Recharge Wrap-up: Audi A4 TDI in US, Local Motors' 3D EV sales

Local Motors plans to begin selling its 3D-printed electric cars in 2016. The Arizona-based startup will begin by selling a neighborhood electric vehicle, called the Reload Redacted, in the first quarter of 2016, with a full-speed version to follow. The design for the car, submitted by Kevin Lo, was chosen by a panel from a pool of entries. The company plans to set up microfactories to build the cars at a fraction of the cost of setting up a traditional automotive manufacturing facility. Now, Local Motors is looking at ways to quicken the 3D-printing process, a task that currently takes days for a single vehicle. Read more at NBC News, or in a blog post from Local Motors. Audi will bring a diesel variant of the A4 to the US for the first time as a 2017 model. The new A4 is slated to go on sale in March of 2016. In addition to the gasoline-powered 2.0-liter TFSI motor, the A4 will be available with a 2.0-liter turbocharged diesel motor, providing 190 horsepower and 236 pound-feet of torque, mated to a seven-speed S Tronic dual-clutch transmission. Audi has not yet release fuel economy figures or pricing. Read more at Hybrid Cars. A company called EV Charging USA has announced its entrance into the marketplace. After a research phase, EV Charging has launched a services division to provide consulting services to the electric vehicle industry, particularly to charging networks looking to expand into new markets. EV Charging says it helps companies evaluate existing charging locations and make decisions about new locations, equipment and installation vendors. With charging industry revenues expected to grow to $2.9 billion by 2030, EV Charging USA sees potential for its services worldwide. Read more in the press release below. EV Charging USA Inc. Enters National & International Sector CHICAGO, July 8, 2015 /PRNewswire/ -- EV Charging (OTCQB: EVUS) today announced its entrance into the EV Charging marketplace. The company after extensive research has elected to launch an EV charging support related services division. The company reviewed a multitude of research and announcements by some of the top automobile producers and researchers in the world, such as BMW, Chevrolet, Tesla, Nissan, Ford and other major automobile manufacturers.