2011 A5 Premium. Super-clean With No Reserve!!! on 2040-cars

Auto blog

2016 Audi TT [w/video]

What came first, the metrosexual or the Audi TT? While it was close, the descriptor-turned-epithet preceded the 1995 concept car by one year. However, they were both notable cultural evolutions and they happened to work together perfectly. Hugh Grant, playing the cad Will Freeman in the 2002 film About a Boy, could not have chosen a better example of character than his silver TT.
A decade later, the original TT was still important enough that when rumors of the third-generation coupe began to surface in late 2012, the most exciting fantasy was that the 2014 coupe might "recapture some of the distinctiveness and impact" of a 16-year-old car (the TT came to market in 1998). Even speculation by dedicated Audi observers thought the brand would do something novel, even if not mimicry. The obvious takeaway: no one was going to be lighting any candles for the departed second generation. All of that is why when the first leaked image slipped onto the Internet, people began to get suspicious. When the third generation took the stage at the Geneva Motor Show, we could almost hear the digital deflation over the Ethernet, our poll results notwithstanding.
Yet it's still the TT, and in spite of having seen its interior and virtual cockpit and clocked its specs, we couldn't judge it before heading to Marbella, Spain to drive it. What we found out was while it's better than the second generation, it's still very much a TT.

Delphi thrilled with results from autonomous car's cross-country trip

In the first trip across the United States ever made by an autonomous car, engineers from Delphi Automotive were surprised to learn that, in some cases, their vehicle behaved a lot like a human driver. "The car was scared of tractor trailers," said Jeff Owens, the company's chief technology officer. "The car edged to the left just a little bit when it would pass trucks, and that was an interesting observation." Engineers made hundreds of notes throughout the drive, as the autonomous car covered 3,400 miles through 15 states en route to a showcase near the New York Auto Show. Overall, company officials said the car performed better than anticipated in a variety of road and weather conditions. In the course of the cross-country drive, drivers actually controlled the car only for about 50 miles, and those cases were limited to on-and-off ramps and the occasional construction zone where lanes were not marked or only sporadically marked. The purpose of the trip was to glean information on how the autonomous car worked in a real-world environment. Google and others have tested autonomous cars and autonomous features in select real-world environments before, but Delphi's adventure was the first to trek into a test with such varied challenges over a nine-day trip that began near the Golden Gate Bridge on March 22. There are some things the engineers have already learned, like the fact the camera systems had the occasional blip when the sun-angle was low. And there are some things to still be learned, as they pour over three terrabytes worth of data from cameras, radar and lidar sensors in the weeks ahead. "It's going to take us a couple weeks to digest all this," Owens said. "But we had all the data from tests. It was time to put this on the road." Built into an Audi SQ5, the vehicle was striking, if only for the fact it looked like a normal car. Many other autonomous vehicles have quirky sensors atop the roof or other features that make them stand out as experiments. Delphi arranged this one to look as much like a normal car as possible, right down to stowing an army of computers under cargo mats, so the rear contained as much trunk space as the production model. If a fellow motorist didn't know where to look -- or take the time to notice the person in the driver's seat didn't have their hands on the wheel -- there was no reason to suspect this was anything other than a regular car.

Audi 3D-printed this tiny Type C racer, we want to drive it

See this little guy? No, not the one driving – that's Professor Hubert Waltl, Audi's head of production and Volkswagen's chief toolmaker. The thing he's driving, though, is a 1:2 scale replica of the 1936 Auto Union Type C. And it was 3D-printed entirely in house. Not in one piece, mind you. It's too big for that. But the Audi Toolmaking division employed metal printing technology to fabricate all the parts that went into this replica of one of the most dominant of the Silver Arrow grand prix racers of the pre-war era. It's essentially like the pedal car Audi rolled out nine years ago, or the E-Tron concept it showed us nearly five years ago. Only this one uses more advanced manufacturing techniques. Aside from making us want to drive it like nobody's business, the half-sized vehicle serves to showcase the advancements which Audi and the VW Group are making in manufacturing – particularly in the area of 3D printing. The German automaker presently has the technology to print laser-melted layers of metallic powder – either steel or aluminum – with grains measuring half the diameter of a human hair. The equipment can handle objects as large as 7.9 inches high by 9.5 inches wide – which, as small as this little car looks, is still a bit too large to simply print out in one piece. Audi Toolmaking prints "Auto Union Typ C" - Exact model of the "Silver Arrow" from a 3D printer - Audi Board of Management Member for Production Prof. Dr. Hubert Waltl: "This underscores our pioneering role in toolmaking." From powder to a component: With a 3D printer, Audi Toolmaking has produced a model of the historical Grand Prix sports car "Auto Union Typ C" from the year 1936. The company is now examining further possible applications of metal printers for the production of complex components. At the same time, Audi is creating important synergies with toolmaking in other parts of the Volkswagen Group. "We are pushing forward with new manufacturing technologies at Audi Toolmaking and at the Volkswagen Group," stated Prof. Dr. Hubert Waltl, Audi's Board of Management Member for Production and Head of Toolmaking at the Volkswagen Group. "Together with partners in the area of research, we are constantly exploring the boundaries of new processes. One of our goals is to apply metal printers in series production." The Volkswagen Group has a total of 14 toolmaking units in nine countries. Under the leadership of Prof. Dr.