Premium, Fully Loaded, One Owner, Clean Car Fax on 2040-cars

Auto blog

2017 Audi A4 Deep Dive

Unchanged. Plain. Boring. These words have been used to describe the new 2017 Audi A4, but they all miss the point entirely. Yes, the design of the new A4 is evolutionary, rather than a ground-up restyling. But as they say in ancient High German, "If it ain't broke, don't fix it." Of course, if you're at all interested in the 2017 Audi A4, you've probably read all about it in the official press release a few days ago. So we'll cut to the chase and tell you the bits you don't already know: the American-market details. We spent a day at Audi headquarters in Ingolstadt last week finding out the latest and poking around the A4 in the metal. The new A4 is wider, longer, and roomier than before. The lines are crisper and sharper, but yes, the proportions have remained very similar. That was done on purpose, thoughtfully. Not out of laziness. Stand any two sequential generations of Porsche 911 next to each other and you'll find they are rather similar. And yes, people do complain about that. But they also complain about the property tax rate on their third home in Monaco. That familiar-looking body gets a shockingly low coefficient of drag of just 0.23. The improvements in drag come from fine-tuning details down to the placement of the side mirror (now on the door, rather than the triangular window panel) and the contouring of the inner edge of the side mirror, which gets little vortex generating bumps to improve the turbulent airflow in that area, reducing drag. Attention to detail and refinement of a successful design – not boring, lazy repetition. Another notable departure in the styling of the new A4 is equally subtle, but even more significant from a precision manufacturing perspective: the hood has no cut lines on its upper surface. Instead, the hood now wraps around the tops of the fenders, the cut line integrating with the sharp crease that runs down the entire body side. The creation of this cut line requires extremely tight manufacturing tolerances to enable the precise alignment of the hood and fender gap with the stamped-in crease in the door panel; misalignment would be obvious and catastrophic to the clean, simple design's flow. Now, let's rip off this Band-Aid: no, we won't be getting the Avant. Why? Because no one buys it, vociferous vocalizations on the Internet aside.

Audi spotted running R8 E-Tron at the 'Ring

An electric version of the original Audi R8 may never have come to fruition – at least not in a form you could actually buy. But with the introduction of the all-new, second-generation model, Audi is getting serious about the prospect of producing the R8 E-Tron. And if you don't believe it, just look at these latest spy shots. Spotted testing at no less punishing a location than the Nurburgring is the upcoming new 2016 Audi R8 E-Tron. It looks just like the one we saw in Geneva earlier this year, painted in that same shade of electric blue, which we think suits the car rather well. It even has that orange strip of lighting around the side intakes, which drives the point of its electrification home in a rather stylish way, too. This prototype is wearing different wheels, and looks like it has some testing equipment mounted inside. Otherwise, this is pretty much what we can expect to see when Audi begins selling its electric supercar. We're sure there are more than a few eagerly awaiting customers who want to get their hands on an EV different from the Teslas or Nissan Leafs every other tree-hugger in the neighborhood has plugged in to their garages. To that end, expect the order books to open sometime later this year or maybe early into the next. Then the dream of an electric coupe with 456 horsepower and 679 pound-feet of torque, good for a 0-60 time in the three-second range and capable of tackling the Nordschleife, will finally become a reality. In the meantime, you can check out a piece of the action in the image gallery above. Related Video: Featured Gallery 2016 Audi R8 E-Tron: Spy Shots View 9 Photos Image Credit: CarPix Green Spy Photos Audi Coupe Electric Performance

Recharge Wrap-up: Atieva making EV with former Tesla talent, Holland lowers PHEV incentives

A reduction of tax incentives on company cars in Holland is expected to put the brakes on plug-in hybrid sales. Cars are taxed at an average of 25 percent, with plug-in hybrids taxed at just seven or 14 percent, depending on emissions. Taxes on PHEV company cars will increase to 14 and 21 percent. With company car leases making up a third of vehicle sales in 2014, the uptake on PHEVs "will likely go back to regular volumes," according to Volvo's Christiaan Krouwel. It could be a boon for battery electric cars, as their tax rate will remain at four percent for company cars. Read more at Automotive News Europe. Ford is testing cylinder deactivation in its 1.0-liter EcoBoost engine. On-road prototype testing has shown improvements in fuel economy of as much as six percent. Ford engineers developed a system using a new dual mass flywheel, pendulum absorber, and tuned clutch disc to allow cylinder deactivation under a wider range of speed and engine loads with less NVH. "The highest priority in the development of new combustion engines for automotive applications is the ongoing reduction of fuel consumption," says Ford's Andreas Schamel, presenting Ford's findings to the Vienna Motor Symposium. Read more at Green Car Congress or in the press release from Ford. Atieva is building an EV with the help of numerous former Tesla employees. The Silicon Valley-based startup was founded in 2007 by a former Tesla vice president, and its roster includes 12 other former Tesla employees. Already well funded, Atieva is now looking to fill its ranks with more talent, with 32 engineering positions, two recruiter positions and other job openings posted at its website. As for the EV it is working on, Atieva says it is "redefining what a car can be, by building an iconic new vehicle from the ground up." Read more at Charged EVs. Testing shows that Joule ethanol, made from recycled CO2, meets standards for use in the US and Europe. In partnership with Audi, Joule has been working toward making its recycled CO2 fuels ready for commercialization. "We are pleased to achieve another critical step towards our planned near-term delivery of fuel-grade ethanol from recycled CO2," says Joule President and CEO Serge Tchuruk. "Using waste CO2 as a feedstock, our technology has the two-fold advantage of reducing greenhouse gas emissions and producing cost-competitive, drop-in fuels." Joule will use these test results to get government approval for the use of its ethanol in highway fuel.