2012 Audi A4 Quattro S-line Rare 6-speed Manual on 2040-cars

Auto blog

Audi service tech joyrides customer car, allegedly takes drugs on the way [UPDATE]

UPDATE: We've received and added an official statement from Audi Palo Alto. Dealerships get a bad rap. Stories about sleazy salespeople and overpriced service procedures abound, even though the reality is that most dealers are run by and employ honest, fair folks. But just because the bulk of dealers and their employees are good people, it doesn't mean some bad eggs won't slip through the cracks. Audi Palo Alto, in the heart of Silicon Valley, is finding this out the hard way after dash cam video of a service tech abusing a customer's car started blowing up on YouTube. In the video, which you can watch above, the unnamed service tech took YouTube user Carrera Chris's Audi – it's not clear what model, but it sounds like one of the company's higher-performance 3.0-liter, supercharged V6 models – for a rather spirited test drive. There are plenty of wide-open-throttle runs mixed in with some speeding – the dash cam's lower display shows 90 miles per hour at one point on the freeway – and you can hear the driver laughing throughout. None of this is too remarkable on its own, and maybe not enough to get the tech fired. Until, that is, he pulls into a parking lot and begins snorting something. The dash cam doesn't show the technician, so it's impossible to determine what substance – if any – the driver is allegedly taking. It could be coke, could be crushed up pills, or, hey, it could be a prescription nasal spray (it is allergy season, even in perpetually lovely northern California). Carrera Chris does say he found white powder in the seams of the driver's seat, so take that for what it's worth. There are five videos that include 12 minutes of footage – the one up top is a summary, while the four below show the alleged drug use and some more mundane footage. We've reached out to Audi Palo Alto's general manager, Jason Mattia. He wouldn't answer our questions over the phone, but did forward an official statement from the dealer. An unfortunate incident was brought to our attention earlier this week. We immediately began our investigation and have already taken action. We are working with the customer involved and have thanked them for bringing this matter to our attention. At Audi Palo Alto, we are proud to be a part of the San Jose community. We value and respect our customers, and our team of 75 employees strives to deliver the highest level of customer service.

Audi confirms Q8, electric CUV in the works

Word got out in late 2012 that the Audi Q8 was reportedly approved for production, but the company has kept the model's development under wraps since then. In a recent speech during Audi's annual meeting, chairman Rupert Stadler confirmed a little more about the vehicle and dropped some hints about other upcoming projects. With luxury crossovers remaining a lucrative market, it should be no shock that Stadler emphasized them in his speech. He reiterated that the Q1 was on track to launch in 2016, and the chairman also confirmed the Q8 as "a sporty Q derivative" that's on the way. The last member of Audi's upcoming CUV onslaught, an electric Q series, is set for 2018 with a range of over 311 miles. An earlier report suggests that the Q1 might not go on sale in the US because it's not right for the market. However, Audi of America is pushing hard to get the Q8. That crossover is based on the latest Q7 (pictured above) and is a way for the Four Rings to take on the BMW X6 and Mercedes-Benz GLE Coupe. The electric Q model was only officially announced earlier this year, and it might use 90-kWh batteries to achieve its performance and range goals. The rest of Stadler's speech focused on the company's future. This year alone, the company is launching products like the second-gen Q7, the new R8, and latest A4. In the next five years, Audi plans to grow its product range from 52 vehicles "to about 60 models," according to the chairman. Rupert Stadler, Chairman of the Board of Management of AUDI AG Neckarsulm, 2015-05-22 Speech at the 126th Annual General Meeting of AUDI AG Outlook Thank you, Axel Strotbek, for your summary of financial year 2014. Ladies and gentlemen, that brings us to 2015 – the year of the next stage of our model initiative. We will present twelve new Audi models this year; the three most important of them are: the new Audi Q7, the new Audi R8 as the sporty spearhead of our brand and our top seller, the new Audi A4. You have already been able to admire the new Q7 and R8 at the entrance. Both of them make a strong statement. Both of them stand for sportiness and top premium quality. And both of them underscore our claim to leadership. We have produced more than 540,000 of the first-generation Q7. The new Audi Q7 is more than a worthy successor. It's the lightest vehicle in its segment. By means of intelligent lightweight construction, we have reduced its weight compared with the predecessor by up to 325 kilograms, depending on equipment levels.

Researchers halfway to cutting carbon fiber costs by 90%

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.