Tt 2.0 Turbo Coupe Premium Heated Leather/suede 20 Inch Wheels Ipod Xm Radio on 2040-cars

Auto blog

Audi calls R18 E-Tron Quattro its 'most complex race car'

Technically speaking, Audi's R18 E-Tron Quattro is quite technical. The German automaker says the diesel-hybrid is the "most complex race car" it's ever created. And we'll take their word for it. The Audi, which pairs a V6 turbodiesel powering the rear wheels with two electric motors, is all about connectivity, giving the car's crew the opportunity to constantly monitor the vehicle while it's racing. The car sends in a host of data each lap to the crew's computers, and the vehicle's telemetry system constantly keeps tabs on things like hybrid energy levels, cockpit temperature and boost-pressure levels. In all, the amount of data parameters is more than 100 times greater than in 1989, when Audi first tested a race car equipped with automatic data transmission capabilities. Audi first released specs on the updated version of the R18 E-Tron Quattro late last year, trumpeting the vehicle's advantages in competing in the LMP1 class of the 2014 World Endurance Championship (WEC). Audi made the car a little narrower and a little taller and it complies with a new WEC regulation requiring the front end set off by a new wing. Take a look at Audi's most recent press release below. AUDI R18 E-TRON QUATTRO WITH COMPLEX ELECTRONIC ARCHITECTURE • Telemetry connection between race car and pit lane • Permanent acquisition of far more than 1,000 parameters • Various electronic control units interlinked by a multitude of CAN Bus systems Ingolstadt, May 5, 2014 – The Audi R18 e-tron quattro is the most complex race car created in Ingolstadt and Neckarsulm to date. This not only applies to the mechanics. The electronics of the most recent LMP1 race car with the four rings is more sophisticated than ever before. The age of electronic data transmission from the race car on track began for Audi in 1989. At that time, an Audi 90 quattro in the IMSA GTO series radioed eight parameters to the garage where engine speeds and a few pressures and temperatures were plotted on printouts – a tiny step from today's perspective, but one that provided important insights at the time. Today, an Audi R18 e-tron quattro on more than a thousand channels, in cycles that in some cases only amount to milliseconds, generates data of crucial importance to a staff of engineers at Audi Sport. At Le Mans, the engineers constantly monitor their race cars for 24 hours.

Audi debuts all-new R18 E-Tron Quattro with novel secondary hybrid system

This is the new Audi R18. It looks like the Bond villain of race cars (it has red running lamps), and if Audi's past is any indication, it'll prove difficult to beat in the LMP1 class of the 2014 World Endurance Championship.
The car's full name is the Audi R18 E-Tron Quattro, just like last year's car. Also like last year's car, the new R18 draws its power from a V6 turbodiesel, which powers its rear wheels, and Audi's E-Tron hybrid system, which runs its front axle. Unlike last year's car, though, this R18 has a secondary hybrid system. Audi has fitted the V6 with an electric turbocharger and figured out how to capture waste heat generated when the engine reaches its boost limit. That power can then be stored and fed back into either the turbo or the front axle's hybrid system under acceleration.
There are a number of changes to the body on the new car, forced in large part by series regulation changes. The car is narrower, particularly at the front, but it's also taller. The front end is set off by a new wing, as part of a new WEC regulation. Audi seems quite pleased about this, citing an improvement in front-end downforce and a reduction in cost. Like Formula One, the WEC contenders now have to contend with a ban on the so-called blown diffuser, which forced exhaust gases over the diffuser, creating downforce. That's necessitated some changes from Audi, although as we have no rear shots of the car, we can't tell you what it looks like.

Audi's new 1,000-hp hybrid pulls like a freight train

Audi's latest plug-in hybrid handles like it's on rails, and pulls like a freight train. That's because it's a train, and literally rides on rails. The vehicle in question is a locomotive which the German automaker developed for its main factory in Ingolstadt incorporates over 11 miles of railroad tracks, along which are transported parts and completed vehicles to be moved around the site. To carry out those duties, Audi teamed up with French manufacturer Alston to deploy a new hybrid locomotive on premises. The locomotive features a plug-in hybrid propulsion systems capable of running on electric power alone for two hours at a time, and can be plugged in to recharge during down-time. The upshot is that it not only pollutes less overall, but can be run inside warehouses more safely. When the power runs out, the electrical system is backed up by a diesel engine. Audi reports that 15 trains arrive at the factory every day. It employs 17 locomotive drivers on site. And each locomotive runs for 3,800 hours each year. Whether we can take Audi at its word when it comes to diesel emissions or not, the company claims that the new hybrid locomotive cuts its carbon emissions by half, taking 60 tons of CO2 out of the atmosphere each year. 10/30/15 Ingolstadt Hybrid locomotive at Audi plant in Ingolstadt This Audi drives on rails: A 1,000 horsepower plug in hybrid locomotive manufactured by Alstom replaces the plant locomotives previously used at the Audi plant in Ingolstadt as of today. This means that components and finished Audi models will now reach the plant's loading stations in a more climate friendly way. "Our goal is all-round sustainable logistics," stated Johann Schmid, head of the Audi plant railway in Ingolstadt. "The new railway technology allows more economical, energy-efficient and low-emission rail transport. In connection with the latest chassis technology, the plug-in-hybrid locomotive sets new standards in shunting and rail transport." The complete automobile plant in Ingolstadt includes 18 kilometers of railways. Every day, 15 goods trains arrive at Ingolstadt North railway station for Audi – loaded with pressed parts, engines and transmissions, as well as cars from other Audi sites that are ready for delivery to customers. And cars produced in Ingolstadt also start their journey to customers by rail. 17 Audi locomotive drivers work at the plant railway. One of their tasks is to allocate the wagons to the various plant buildings.