Audi Q7 on 2040-cars

Auto blog

VW recalls 220,000 Atlases, Atlas Cross Sports for airbag defect [Updated]

[Update: Audi of America has confirmed that no U.S. models are among the recall population for plug-in hybrid fire issue.] Volkswagen has issued yet another recall for its Atlas SUV, this time for side airbags that may not deploy correctly in an accident due to a problematic connection in one of the vehicle's wiring harnesses. The campaign covers 222,892 Atlas and Atlas Cross Sport models built for the 2019-2023 model years.  The issue stems from a connection with the wiring harness that runs from the A-pillar into the door. VW says that harnesses produced by one of its suppliers were not built with additional measures to prevent movement at the connection point. Small movements can cause abrasion of the metal contacts which could lead to a whole host of electronic misadventures, including the potential for airbag deployment to be delayed in a crash.  "Micro-movement of the wire harness (terminal A-Pillar to front door) can result in damage to the wire terminal surface. Damage to the surface can [result] in fretting corrosion which may cause sporadic interruption in the electrical connection to the components of the front door," VW said in its defect notice. "The airbag warning light may illuminate if a malfunction is detected. Other symptoms of a sporadic interruption of the affected electrical connection can be: inadvertent rolling down windows, inadvertent park brake engagement at low speeds (below approx. 3km/h or 1.8mph), warning regarding faulty door sensor," VW said.  Not every model built within the range defined above is subject to the recall; terminals from other suppliers were manufactured with the necessary safeguards in place. If you own a 2019-2023 Atlas or Atlas Cross Sport, keep your eyes peeled for a notification from VW regarding the campaign, likely some time in early-mid May.  PHEV problems Across the Atlantic, the VW Group mothership confirmed that it will recall more than 100,000 plug-in hybrid models worldwide to address a fire risk. The recall was launched in response to 16 reported incidents of fires stemming from insufficient insulation of the PHEV battery pack that allows the engine cover to make contact if it is not completely secure. If that happens, the heat from the battery can ignite the engine cover. The recall will cover PHEVs build by VW, Audi, Seat and Skoda, Reuters reports, including the VW Passat, Golf, Tiguan and Arteon — plug-in variants of which are not sold in the United States.

BMW expects China to pass US as its top market in 2013

When you combine two billion citizens, 100 cities with more than a million inhabitants and an economy that's as unrestrained as Jim Cramer on an Adderall binge, China's explosive auto industry growth shouldn't be a huge surprise. Audi already lists the communist country as its largest market, while Mercedes-Benz is expecting it to be there in the next few years. Now, according to a report from Automotive News, BMW is expecting the People's Republic to overtake the United States in sales by the end of 2013.
We already discovered the extent that BMW is going to in establishing a dedicated Chinese stronghold, when we explored BMW's Shanghai-based DesignWorks studio ahead of April's Shanghai Motor Show. And while we argued that DesignWorks Shanghai hasn't really borne fruit, it isn't due to a lack of sales.
BMW China has seen a 16-percent jump in year-over-year sales, lead by a 28-percent gain in 5 Series sales. Part of BMW's growth strategy comes from an ever-expanding dealership network. Remember those 100 cities we mentioned with over one million people? According to Karsten Engel, CEO of BMW's Chinese operations, those 100-million-plus city dwellers don't have access to a premium dealership.

Audi 3D-printed this tiny Type C racer, we want to drive it

See this little guy? No, not the one driving – that's Professor Hubert Waltl, Audi's head of production and Volkswagen's chief toolmaker. The thing he's driving, though, is a 1:2 scale replica of the 1936 Auto Union Type C. And it was 3D-printed entirely in house. Not in one piece, mind you. It's too big for that. But the Audi Toolmaking division employed metal printing technology to fabricate all the parts that went into this replica of one of the most dominant of the Silver Arrow grand prix racers of the pre-war era. It's essentially like the pedal car Audi rolled out nine years ago, or the E-Tron concept it showed us nearly five years ago. Only this one uses more advanced manufacturing techniques. Aside from making us want to drive it like nobody's business, the half-sized vehicle serves to showcase the advancements which Audi and the VW Group are making in manufacturing – particularly in the area of 3D printing. The German automaker presently has the technology to print laser-melted layers of metallic powder – either steel or aluminum – with grains measuring half the diameter of a human hair. The equipment can handle objects as large as 7.9 inches high by 9.5 inches wide – which, as small as this little car looks, is still a bit too large to simply print out in one piece. Audi Toolmaking prints "Auto Union Typ C" - Exact model of the "Silver Arrow" from a 3D printer - Audi Board of Management Member for Production Prof. Dr. Hubert Waltl: "This underscores our pioneering role in toolmaking." From powder to a component: With a 3D printer, Audi Toolmaking has produced a model of the historical Grand Prix sports car "Auto Union Typ C" from the year 1936. The company is now examining further possible applications of metal printers for the production of complex components. At the same time, Audi is creating important synergies with toolmaking in other parts of the Volkswagen Group. "We are pushing forward with new manufacturing technologies at Audi Toolmaking and at the Volkswagen Group," stated Prof. Dr. Hubert Waltl, Audi's Board of Management Member for Production and Head of Toolmaking at the Volkswagen Group. "Together with partners in the area of research, we are constantly exploring the boundaries of new processes. One of our goals is to apply metal printers in series production." The Volkswagen Group has a total of 14 toolmaking units in nine countries. Under the leadership of Prof. Dr.