Auto blog

Next-gen Audi Q7 shows off its wares ahead of Detroit

Audi has put the Q7 on a massive diet, trimming over 700 pounds. Meet what is sure to be one of the bigger debuts at the upcoming 2015 Detroit Auto Show. The next-generation Audi Q7 has been the subject of spy shots and conjecture for quite some time. After all, it was easily the oldest vehicle in the Audi range, having hit the market way back in 2006. But with this new model, Audi has comprehensively updated its fullsizer, adding some cutting-edge tech, updating some classic engines, and taking a whole lot out. As is the theme nowadays, particularly among large crossovers and SUVs, Audi has put the Q7 on a massive diet with a mix of ultra-high-strength, hot-shaped steel and aluminum, trimming over 700 pounds of body fat and lowering the Q7's weight to just under 4,400 pounds. This was accomplished while maintaining virtually identical dimensions to the current model. While Audi USA hasn't released its info on the Q7, the Euro-spec model will continue to offer a pair of engines that should be very familiar to US consumers, with a 3.0-liter, supercharged V6 gas engine and a 3.0-liter TDI V6. The European engines, though, have had their CO2 emissions halved, while actually increasing performance (we should expect similar from the US engines). The 3.0-liter TDI has been bumped up from 240 horsepower to 272 ponies, while torque is up from 406 pound-feet to 443. The 3.0-liter TDI has been bumped up from 240 horsepower to 272 ponies, while torque is up from 406 pound-feet to 443. This extra grunt has trimmed the 0-60 time from a leisurely 7.3 seconds down to 6.3, while the fuel economy has jumped up to 41.3 US miles per gallon, converted from the European cycle (so expect the EPA numbers to be a bit lower). The supercharged 3.0-liter, meanwhile, has been amped up to match the output of its application in the S4 sport sedan, jumping from 280 hp and 295 lb-ft to 333 ponies and 325 lb-ft. Once again, the 0-60 time falls dramatically thanks to the power bump and weight loss, dropping from 7.7 seconds to a far more zippy 6.1. The most exciting news is the long-rumored arrival of the Q7 E-Tron, a plug-in hybrid that's mated to a six-cylinder diesel engine and Quattro all-wheel drive. Audi claims this world-first production powertrain will return 138.4 US miles per gallon, emit less than 50 grams of CO2 per kilometer and allow the Q7 E-Tron to travel up to 35 miles on electric power alone.

Audi's new 1,000-hp hybrid pulls like a freight train

Audi's latest plug-in hybrid handles like it's on rails, and pulls like a freight train. That's because it's a train, and literally rides on rails. The vehicle in question is a locomotive which the German automaker developed for its main factory in Ingolstadt incorporates over 11 miles of railroad tracks, along which are transported parts and completed vehicles to be moved around the site. To carry out those duties, Audi teamed up with French manufacturer Alston to deploy a new hybrid locomotive on premises. The locomotive features a plug-in hybrid propulsion systems capable of running on electric power alone for two hours at a time, and can be plugged in to recharge during down-time. The upshot is that it not only pollutes less overall, but can be run inside warehouses more safely. When the power runs out, the electrical system is backed up by a diesel engine. Audi reports that 15 trains arrive at the factory every day. It employs 17 locomotive drivers on site. And each locomotive runs for 3,800 hours each year. Whether we can take Audi at its word when it comes to diesel emissions or not, the company claims that the new hybrid locomotive cuts its carbon emissions by half, taking 60 tons of CO2 out of the atmosphere each year. 10/30/15 Ingolstadt Hybrid locomotive at Audi plant in Ingolstadt This Audi drives on rails: A 1,000 horsepower plug in hybrid locomotive manufactured by Alstom replaces the plant locomotives previously used at the Audi plant in Ingolstadt as of today. This means that components and finished Audi models will now reach the plant's loading stations in a more climate friendly way. "Our goal is all-round sustainable logistics," stated Johann Schmid, head of the Audi plant railway in Ingolstadt. "The new railway technology allows more economical, energy-efficient and low-emission rail transport. In connection with the latest chassis technology, the plug-in-hybrid locomotive sets new standards in shunting and rail transport." The complete automobile plant in Ingolstadt includes 18 kilometers of railways. Every day, 15 goods trains arrive at Ingolstadt North railway station for Audi – loaded with pressed parts, engines and transmissions, as well as cars from other Audi sites that are ready for delivery to customers. And cars produced in Ingolstadt also start their journey to customers by rail. 17 Audi locomotive drivers work at the plant railway. One of their tasks is to allocate the wagons to the various plant buildings.

Audi A1 now testing after S1 Geneva debut

Audi showed of its new S1 hot hatch to the public at the Geneva Motor Show last week, but the Four Ringed brand isn't done tweaking the smallest member of its lineup. Here are spy shots of an upcoming refresh of the standard A1.
The camouflaged model on display here appears to be the three-door model. From what we can discern, it seems the A1 is going to look a lot more like the S1 after the revisions. The headlights and taillights are more like the new performance model than the current standard car. Unlike the S model, the facelifted version has a different front bumper with reshaped foglights and a slightly altered design.
A release date for the refresh hasn't been announced yet, but regardless it probably won't be coming here. Audi is already aiming the A3 at young, American buyers. The little A1 just doesn't fit with that strategy.