2006 Audi A8l Quattro!! Nav A/c&htd-sts Pdc Push-start/stop Shades Bose 19"whls on 2040-cars

Auto blog

Audi R8 V10 gets tuned up by ABT

Bavarian tuners ABT have done another job on the Audi R8 V10, pumping up the 5.2-liter FSI V10 from 525 horsepower to 600 hp, and torque from 391 pound-feet to 406 lb-ft. With 50 more horsepower than the R8 V10 Plus - but not the extreme weight-loss scheme - ABT claims a 0-62 mile per hour run of 3.5 seconds, the same as the R8 V10 Plus, and a top speed for the mid-engined coupe of 198 miles per hour "is no problem at all."
Managing all that speed are the aero tweaks provided by a comprehensive body kit including a rear wing, a lowered and beefed-up suspension, a stainless steel exhaust and 19-inch wheels in two different designs.
The press release below has a few more bits of info on the matter. And while ABT hasn't put a price on the Audi upgrades, but it's safe to say that nearly 200 mph in an R8 won't come cheap.

The Audi RS3 LMS looks hot and ready

Audi had several reveals this week at the Paris Motor Show, but nothing was more batty than the new RS3 LMS race car. Audi's latest hot homologation car starts with the all-new RS3 sedan, removes all of the unnecessary bits and adds all the racing-spec equipment you could want. The result is a full-prepped, relatively affordable factory race car. That relatively affordable part is very important. Audi Sport, the division behind the R8 LMS as well as the R and RS road cars, designed the RS3 LMS for the still-new TCR FIA-spec racing series. The cars will cost about $112,000 USD for the club sport version and $145,000 with the six-speed sequential transmission. Not bad for a fully FIA-friendly factory machine. The new TCR series races follow other FIA series like Formula 1 and WEC. <p>Your browser does not support iframes.</p> All that cash get's nets you a pretty badass looking car, especially in Audi's black and red paint scheme. As you can see in the photos, the RS3 LMS is far wider than the standard sedan, which is fairly compact by modern standards. The requisite giant rear wing is present, as is the big front splitter. The RS3 LMS ditches the new road car's dual exhaust for a cool looking single, center-exit pipe. Inside, it's all bare metal and plastic, ditching any semblance of road-going civility. Under the hood, the RS3 LMS loses the new 2.5-liter turbocharged inline-five and replaces it with Volkswagen's 2.0-liter turbocharged four. In this application, the engine pumps out a healthy 330 horsepower. Audi claims a 0 to 60 mph time of 4.5 seconds. Audi says customer deliveries will start in December, so look for the new car on track starting in 2017. Related Video: Featured Gallery 2017 Audi RS3 LMS: Paris 2016 View 10 Photos Related Gallery 2017 Audi RS 3 LMS View 11 Photos Image Credit: Drew Phillips Motorsports Paris Motor Show Audi Racing Vehicles 2016 paris motor show

Audi rolls out new A6 L E-Tron hybrid for China

Audi is expanding its range of hybrid models with the introduction of the A6 L E-Tron at the Shanghai Motor Show. It's earmarked specifically for the Chinese market and is based on the long-wheelbase A6 L already produced there. The new E-Tron model marries a 2.0-liter turbo four good for 211 horsepower and 258 pound-feet of torque to an electric motor with 122 hp and 162 lb-ft integrated into the eight-speed automatic transmission. A lithium-ion battery pack provides 14.1 kWh power. Mounted in the trunk, it limits cargo capacity to 11.9 cubic feet. The system produces net output of 245 hp and 369 lb-ft – enough to send the long-wheelbase hybrid to 62 miles per hour in 8.4 seconds en route to a top speed of 130 mph. All the while, it'll return 106.9 miles per gallon by the Chinese standard, traveling over 30 miles on electric power alone (at speeds of up to 83.9 mph) and up to 546.8 miles without needing to stop. The A6 L E-Tron is one of three new hybrids Audi is showcasing in Shanghai this year, alongside the Q7 E-Tron and Prologue Allroad concept. Ingolstadt, 2015-04-16 The new Audi A6 L e-tron for China - First Audi plug-in hybrid model from Chinese production - Output of 180 kW (245 hp) with extremely low consumption - 50 km (31.1 mi) electric range and total range of 880 km (546.8 mi) With the A6 L e-tron, Audi is taking an important step toward even greater fuel efficiency in China. The sedan has been developed specifically for the Chinese market. Its plug-in hybrid drive with 180 kW (245 hp) provides for powerful performance. The model consumes on average just 2.2 liters of fuel per 100 kilometers (106.9 US mpg). After launching the e-tron era in China with the imported A3 Sportback e-tron* in 2015, Audi is taking the next step with the local production of the A6 L e-tron beginning in 2016. The model is based on the long version of the Audi A6, which is already built in China, and is configured as a highly efficient parallel hybrid, meaning that its two drives are arranged one directly behind the other. The 2.0 TFSI is a state-of-the-art, four-cylinder, gasoline engine producing 155 kW (211 hp) and 350 Nm (258.1 lb-ft) of torque. The disk-shaped electric motor provides 91 kW and 220 Nm (162.3 lb-ft) of torque. Together with a decoupler, this is integrated into the eight-speed tiptronic transmission, which transfers the power to the front wheels. System output is 180 kW (245 hp); maximum system torque is 500 Nm (368.8 lb-ft).