2000 Audi A6 Quattro Base Sedan 4-door 4.2l on 2040-cars

Auto blog

Audi 3D-printed this tiny Type C racer, we want to drive it

See this little guy? No, not the one driving – that's Professor Hubert Waltl, Audi's head of production and Volkswagen's chief toolmaker. The thing he's driving, though, is a 1:2 scale replica of the 1936 Auto Union Type C. And it was 3D-printed entirely in house. Not in one piece, mind you. It's too big for that. But the Audi Toolmaking division employed metal printing technology to fabricate all the parts that went into this replica of one of the most dominant of the Silver Arrow grand prix racers of the pre-war era. It's essentially like the pedal car Audi rolled out nine years ago, or the E-Tron concept it showed us nearly five years ago. Only this one uses more advanced manufacturing techniques. Aside from making us want to drive it like nobody's business, the half-sized vehicle serves to showcase the advancements which Audi and the VW Group are making in manufacturing – particularly in the area of 3D printing. The German automaker presently has the technology to print laser-melted layers of metallic powder – either steel or aluminum – with grains measuring half the diameter of a human hair. The equipment can handle objects as large as 7.9 inches high by 9.5 inches wide – which, as small as this little car looks, is still a bit too large to simply print out in one piece. Audi Toolmaking prints "Auto Union Typ C" - Exact model of the "Silver Arrow" from a 3D printer - Audi Board of Management Member for Production Prof. Dr. Hubert Waltl: "This underscores our pioneering role in toolmaking." From powder to a component: With a 3D printer, Audi Toolmaking has produced a model of the historical Grand Prix sports car "Auto Union Typ C" from the year 1936. The company is now examining further possible applications of metal printers for the production of complex components. At the same time, Audi is creating important synergies with toolmaking in other parts of the Volkswagen Group. "We are pushing forward with new manufacturing technologies at Audi Toolmaking and at the Volkswagen Group," stated Prof. Dr. Hubert Waltl, Audi's Board of Management Member for Production and Head of Toolmaking at the Volkswagen Group. "Together with partners in the area of research, we are constantly exploring the boundaries of new processes. One of our goals is to apply metal printers in series production." The Volkswagen Group has a total of 14 toolmaking units in nine countries. Under the leadership of Prof. Dr.

Autoblog's adventures at the Nurburgring 24-Hour race [spoilers]

The brand-new Audi R8 LMS, said to share 50 percent of its components with the street-legal R8 shown off at Geneva, has won its very first race at the 2015 Nurburgring 24-Hours. The No. 28 car driven by Christopher Mies, Edward Sandstrom, Nico Muller, and Laurens Vanthoor for the Audi Sport WRT team out of Belgium finished only 40.279 seconds ahead of the No. 25 BMW Sport Team Marc VDS Z4 GT3 in second place, for the smallest winning gap since the race began in 1970. Those two cars traded the lead throughout Sunday morning and were less than a minute away from one another for the last two hours. They were part of a total 35 lead changes during the entire race – a record for the event – and both did 156 laps. Third place went to the No. 44 Falken Tire Porsche 997 GT3, one lap down. The Audis did what they always do: lurked close to the front, stayed out of trouble, then pounced when everyone else faltered. For the opening stretches the BMW Z4 teams owned it, running 1-2-3 for a while, but all of them hit trouble. When morning came and the race got over its yellow-flag fever, the No. 28 Audi was in front and stayed there. It was the third Nurburgring 24-Hour win for Audi in four years, the brand's first win only coming in 2012. Last year's winner, the Phoenix Audi team that set a race record by doing 159 laps, had both of its cars retire. One hit an oil patch about 12 hours in, spun and was hit by another car behind, taking on too much damage to continue. The other retired with engine issues. Other Notes Three cars crashed out of the race while leading, after the rains that weren't supposed to happen, happened about 90 minutes in. The No. 20 Schubert BMW Z4 led the first 50 minutes of the race, hopped a crest at Pflanzgarten, landed in a pool of water, and hit the wall on the 30th lap. Then the No. 30 Frikadelli Porsche, with a driver team that included ex-'Ring Taxi driver Sabine Schmitz, hit the No. 31 Mercedes SLS AMG GT3 on the approach to Carrousel and crashed out. Then the No. 1 Phoenix Audi, last year's winning car, took the lead but hit the wall after that oil patch near Pflanzgarten and was out of the race. Aston Martin celebrated a class win in the SP8 category with the No. 49 Vantage GT4 N430. This being the tenth anniversary of the Vantage running the Nurburgring-24, this year's car was painted in the same colors as the racecar from ten years ago.

24 Hours of Le Mans an on-and-off love affair

There was little usual about this year's 24 Hours of Le Mans - intermittent rain in the weeks before the race meant cars didn't get on track as much as they wanted, and intermittent rain during the race meant cars went off track a lot more than they wanted. The race started with a wet track, and one of the records broken because of the random downpours was the number of times the safety car led the field - 11 times this year - although the record of two hours and 53 minutes of lapping behind the safety car, set in 2011, was not eclipsed.
None of that served to dampen the action. With little more than an hour left in the race there were cars still only a few seconds apart fighting for position, leads still changing because of pit stops and everyone drafting anyone they could.
Things didn't go the usual way up front, either - well, not exactly...