2.0t Premium Plus Quattro W/only 34k Miles Flawless Condition on 2040-cars

Auto blog

Next-gen Audi Q7 shows off its wares ahead of Detroit

Audi has put the Q7 on a massive diet, trimming over 700 pounds. Meet what is sure to be one of the bigger debuts at the upcoming 2015 Detroit Auto Show. The next-generation Audi Q7 has been the subject of spy shots and conjecture for quite some time. After all, it was easily the oldest vehicle in the Audi range, having hit the market way back in 2006. But with this new model, Audi has comprehensively updated its fullsizer, adding some cutting-edge tech, updating some classic engines, and taking a whole lot out. As is the theme nowadays, particularly among large crossovers and SUVs, Audi has put the Q7 on a massive diet with a mix of ultra-high-strength, hot-shaped steel and aluminum, trimming over 700 pounds of body fat and lowering the Q7's weight to just under 4,400 pounds. This was accomplished while maintaining virtually identical dimensions to the current model. While Audi USA hasn't released its info on the Q7, the Euro-spec model will continue to offer a pair of engines that should be very familiar to US consumers, with a 3.0-liter, supercharged V6 gas engine and a 3.0-liter TDI V6. The European engines, though, have had their CO2 emissions halved, while actually increasing performance (we should expect similar from the US engines). The 3.0-liter TDI has been bumped up from 240 horsepower to 272 ponies, while torque is up from 406 pound-feet to 443. The 3.0-liter TDI has been bumped up from 240 horsepower to 272 ponies, while torque is up from 406 pound-feet to 443. This extra grunt has trimmed the 0-60 time from a leisurely 7.3 seconds down to 6.3, while the fuel economy has jumped up to 41.3 US miles per gallon, converted from the European cycle (so expect the EPA numbers to be a bit lower). The supercharged 3.0-liter, meanwhile, has been amped up to match the output of its application in the S4 sport sedan, jumping from 280 hp and 295 lb-ft to 333 ponies and 325 lb-ft. Once again, the 0-60 time falls dramatically thanks to the power bump and weight loss, dropping from 7.7 seconds to a far more zippy 6.1. The most exciting news is the long-rumored arrival of the Q7 E-Tron, a plug-in hybrid that's mated to a six-cylinder diesel engine and Quattro all-wheel drive. Audi claims this world-first production powertrain will return 138.4 US miles per gallon, emit less than 50 grams of CO2 per kilometer and allow the Q7 E-Tron to travel up to 35 miles on electric power alone.

Audi rolls out new A6 L E-Tron hybrid for China

Audi is expanding its range of hybrid models with the introduction of the A6 L E-Tron at the Shanghai Motor Show. It's earmarked specifically for the Chinese market and is based on the long-wheelbase A6 L already produced there. The new E-Tron model marries a 2.0-liter turbo four good for 211 horsepower and 258 pound-feet of torque to an electric motor with 122 hp and 162 lb-ft integrated into the eight-speed automatic transmission. A lithium-ion battery pack provides 14.1 kWh power. Mounted in the trunk, it limits cargo capacity to 11.9 cubic feet. The system produces net output of 245 hp and 369 lb-ft – enough to send the long-wheelbase hybrid to 62 miles per hour in 8.4 seconds en route to a top speed of 130 mph. All the while, it'll return 106.9 miles per gallon by the Chinese standard, traveling over 30 miles on electric power alone (at speeds of up to 83.9 mph) and up to 546.8 miles without needing to stop. The A6 L E-Tron is one of three new hybrids Audi is showcasing in Shanghai this year, alongside the Q7 E-Tron and Prologue Allroad concept. Ingolstadt, 2015-04-16 The new Audi A6 L e-tron for China - First Audi plug-in hybrid model from Chinese production - Output of 180 kW (245 hp) with extremely low consumption - 50 km (31.1 mi) electric range and total range of 880 km (546.8 mi) With the A6 L e-tron, Audi is taking an important step toward even greater fuel efficiency in China. The sedan has been developed specifically for the Chinese market. Its plug-in hybrid drive with 180 kW (245 hp) provides for powerful performance. The model consumes on average just 2.2 liters of fuel per 100 kilometers (106.9 US mpg). After launching the e-tron era in China with the imported A3 Sportback e-tron* in 2015, Audi is taking the next step with the local production of the A6 L e-tron beginning in 2016. The model is based on the long version of the Audi A6, which is already built in China, and is configured as a highly efficient parallel hybrid, meaning that its two drives are arranged one directly behind the other. The 2.0 TFSI is a state-of-the-art, four-cylinder, gasoline engine producing 155 kW (211 hp) and 350 Nm (258.1 lb-ft) of torque. The disk-shaped electric motor provides 91 kW and 220 Nm (162.3 lb-ft) of torque. Together with a decoupler, this is integrated into the eight-speed tiptronic transmission, which transfers the power to the front wheels. System output is 180 kW (245 hp); maximum system torque is 500 Nm (368.8 lb-ft).

Volkswagen pushed back against Takata airbag recall

Volkswagen and Audi will recall about 850,000 vehicles in the US to replace their Takata-supplied driver side airbag inflators, but the automaker doesn't believe the safety campaign is entirely necessary. In a letter to the National Highway Traffic Safety Administration, the company pushes the agency to re-evaluate the recall's scope because the parts are allegedly safe, it claims. VW asserted in the letter, which NHTSA posted online (as a PDF) with other documents about the company's safety campaign, that the vast majority of the automaker's recalled vehicles used Takata inflators from the supplier's factory in Freiburg, Germany. Only the US-built Passat had components from Takata's plant in Mexico. VW's argues to NHTSA that its recall is unnecessary because there are no reported airbag ruptures in the German-made parts, and the plant has better quality control than Takata's factories in the US and Mexico. In addition, the Mexico-manufactured components in the Passat are also allegedly safe because they come from a time after significant upgrades to the plant to address humidity and welding concerns. "We do not believe the facts known to date support the scope as defined in the Takata defect notification," VW's letter says. To be clear, VW is not refusing the Takata recall and plans to fix the affected vehicles. Instead, this letter shows the automaker expressing an opinion that NHTSA's scope for the campaign is too broad. VW now plans to do its own analysis on the inflators to strengthen that case, according to The Detroit News. "We respectfully request that, should such results be shown, the agency work with Volkswagen and other manufacturers to revisit the scope of these recalls," the letter said. Takata's recalled inflators use ammonium nitrate as a propellant, and experts believe that long-term exposure to high humidity can make the chemical more likely to cause a rupture during airbag deployment. The spray of metal shrapnel from the exploding parts has links to at least 10 deaths. Related Video: