V12 Manual Coupe 6.0l Bluetooth Nav Carbon Black Alcantara Leather Emboss Stitch on 2040-cars

Auto blog

This Aston Martin V8 Vantage prototype sounds like it has AMG power

We've known for a while now that the next Aston Martin V8 Vantage would get power from a turbocharged Mercedes-AMG engine, but this is the first time we've had a chance to hear it. The video above, recorded by Autoevolution, shows a prototype of the 2018 Aston Martin Vantage cruising around roads near the Nurburgring. The sound is definitely similar to other V8-powered Mercs, and absolutely does not an Aston power plant. As for how good it sounds, the office is split. At least we're in agreement that it's good the car will probably be offered with a manual transmission. We can also pick out a few little details from the body. This new Vantage will get fender vents like those on the DB11 starting from just behind the front wheel arch. The DB11's high and wide rear haunches will carry over as well. This particular prototype has a very deep chin spoiler up front, which may indicate there will be more than one version. The headlights are concealed well, but considering the similarities to the DB11 in other areas, we'd expect similar swept-back headlights up front. Basically, the Vantage is shaping up to continue Aston's tradition of similarly shaped sports cars in different sizes, but that's hardly a bad thing when the resulting cars look so good. Related Video: News Source: Autoevolution / YouTube via Road & TrackImage Credit: Autoevolution / YouTube Spy Photos Aston Martin Coupe Future Vehicles Performance Videos viral video mercedes-amg aston martin v8 vantage

Aston Martin DBX spied looking like a finished product

The Aston Martin DBX is inching closer to its December reveal, and today we get to see the SUV in its most finished form yet. One of our spy shooters managed to catch a DBX out and about with production headlights, taillights, door handles and rear fascia. It’s great to see the DBX like this, because until now weÂ’ve only seen it in the mule-like form that Aston wanted us to see. Taking a look at the rear end is where things really start coming together. Instead of the odd, pod-like taillights, some slick and thin light fixtures extend from the ducktail spoiler into the rear fender. They look proper on the rear end of the SUV. Just a bit below these are the two exhaust outlets. ThereÂ’s still plenty of camouflage about, but the exhaust tips and molding around it appears to be production-spec. ItÂ’s interesting to see the exhaust so high up on the rear bumper in an SUV, and they also stick out a fair amount. Just watch for the flaming hot tips when loading and unloading items directly after driving it. We also gain a better understanding of what the grille is going to look like up front. Instead of the wire mesh weÂ’ve been looking at before, this maw has actual slats and a defined shape. The headlights look like production units, and there are cutouts for possible foglights down there, too. Instead of the unfinished rear door handles, Aston appears to have installed the electric pop-out units weÂ’ve been seeing in the front for awhile. There are more creases and muscular lines visible all over the vehicle that were covered up previously, too. As September quickly approaches, the DBXÂ’s reveal in December isnÂ’t that far out anymore. A few more months will pass, and then the first Aston Martin SUV will be out. There will be plenty of Mercedes-Benz part sharing, but weÂ’re still excited to see what an Aston SUV ends up like

Aston Martin Valkyrie gets insane 1,100-horsepower AMR Pro model

We still have yet to see the final production version of the road-going Aston Martin Valkyrie hypercar, but that hasn't stopped Aston from creating an even more extreme version of the already radical car. It's called the Valkyrie AMR Pro, and it's lighter, more powerful, has more downforce, and is only for use on the track. Powering the Valkyrie AMR Pro is a version of the standard car's naturally aspirated hybrid V12. In this guise, Aston says it produces 1,100 horsepower, more than the standard car. That engine won't have much to carry around, either, since Aston is aiming to have the Valkyrie AMR Pro weight just about 1,000 kilograms, or about 2,200 pounds. To hit that weight, Aston is using lighter carbon fiber for the body, carbon fiber control arms, a lighter exhaust, polycarbonate windows, molded seats, and it has removed the HVAC fan and infotainment system. Fortunately, Aston is including heater elements in the windows so that they don't fog up in wet or cool weather. The Valkyrie AMR Pro's body shape is different, too, and it has been changed to increase downforce. It has usual changes such as large front and rear wings. It also has a tall center fin like that found on prototype and F1 race cars. The body itself is wider, too. All told, Aston expects the car to produce over 2,200 pounds of downforce. The combination of all these performance enhancements means the car can achieve a claimed top speed of 225 mph, as well as cornering forces of over 3G. Aston Martin didn't reveal pricing, but it doesn't matter. Aston already sold all 25 Valkyrie AMR Pros it will build. The company says that they'll be delivered sometime in 2020. Related Video: