2008 Vantage Coupe Sportshift V8,stratus White,carbon Fiber,we Finance on 2040-cars

Auto blog

NHTSA grants Aston Martin temporary exemption from new safety standards

A few months ago, we reported that Aston Martin was in danger of running afoul of new US safety regulations that could force it to take some of its most popular models off the market. The automaker, its dealers and – according to the overwhelming results of our informal online pole – you yourselves reasoned that the constricting regulations were unfair to a small-scale, niche automaker like Aston Martin. And the National Highway Traffic Safety Administration evidently agrees, granting the British automaker a temporary exemption from the regulations and allowing it to keep its cars on the US market. The issue comes down to new side-impact crash standards that require motor vehicles to better withstand a collision with a stationary object like a pole or a tree. The Vantage and DB9 models do not meet the new regulations, and Aston, it seems, doesn't have the wherewithal to re-engineer the cars to meet the regulations. But given the small nature of the independent automaker and the relatively small number of vehicles it sells, NHTSA has granted Aston an exemption. As a result, instead of being forced to comply with the new regulations that took effect for the coupes this past September and for convertibles the next – or else withdraw from the market altogether – the DB9 coupe will have until August 2016 to comply, while the DB9 Volante and both coupe and convertible models in the Vantage line will have until August 2017. It's entirely possible that, by that point, Aston will have all-new models on offer, potentially replacing the Vantage and DB9 models or giving it sufficient new products to offer that taking those older, non-compliant models off the market would not cause it the same degree of financial harm. The automaker has an all-new platform in the works and a new engine deal with Mercedes-AMG in place, and was recently spotted testing what could be the first of its new generation of models at the Nurburgring.

DBX goes black tie with Q by Aston Martin

Aston Martin won't begin delivering its new DBX to customers in North America until the latter half of this year. Perhaps as a favor to DBX intenders that haven't placed orders yet, Q by Aston Martin has prepared a bespoke DBX for the Geneva Motor Show that presents a sliver of the creative possibilities unlocked by working with Q. The near infinite menu of choices has been broken down into two groups, Q by Aston Martin Commission and Q by Aston Martin Collection. Collection fits a range of predesigned accessories like carbon fiber paddle shifters or hood vent louvers for the DBS Superleggera. The Commission range encompasses all the imagination that a customer's bank account can fund. The Geneva show car wears Satin Xenon Grey paint from the Collection, as well as carbon fiber pieces around the lower exterior, black anodized tread plates and plaques on the sill. The 22-inch gloss black painted wheels come from the Commission department. The grand showcase comes inside the DBX vault. Yards of Obsidian Black Leather come from the SUV's standard options list. Commission stewards designed the satin chrome aluminum trim and jewelry as an entree, all milled from a solid ingot of the shiny stuff and finished with a special diamond pattern. They followed that up with a custom technique for the carbon fiber floating center console, door trim, and luggage floor. Craftsmen laid up 280 layers of carbon fiber, cured it for 12 hours, then put five-axis milling machines to work for 90 hours to create the necessary shapes. The finish on the cabin pieces reflects the strata of the hand-laid layers, while the span protecting the luggage floor comes from a single sheet of herringbone-pattered carbon fiber. Raised metal and rubber welts help protect the load floor finish and prevent cargo sliding to and fro.  The standard DBX starts at $192,986 after destination. A Q by Aston Martin DBX will, naturally, cost a touch more. Related Video:    

Aston Martin working on an inline-six to replace Mercedes-sourced V8?

There's no straight line to figuring out whether Aston Martin plans a straight-six motor for future products. In March, comments by the automaker's chief engineer for vehicle attributes, Matt Becker, led many to believe the British firm could use the Mercedes-AMG 3.0-liter hybridized inline-six from the new CLS53. A week later, Becker said his comments had been misconstrued, that he "was speaking in more general terms that we might have to one day look at downsizing engines." Autocar just threw a new curve, citing "a source close to the firm" to report that Aston Martin's working on its own straight-six. The English outlet says the deal Aston Martin signed with Mercedes-AMG was a stopgap deal while Aston Martin worked on proprietary engines. The report says the inline-six developed in Gaydon would eventually replace the 4.0-liter twin-turbo V8 currently powering the DB11 and Vantage. If this purported inline-six were augmented with electrification, perhaps developed with help from the electric Rapid E program, it could make more sense of Becker's first, misconstrued comments. At the time, Becker said the Mercedes hybridized engine "could fit with the brand in the future." Taken generally, he could have meant an Aston Martin version of the German engine. The certainty is that there's a six-cylinder coming for larger-volume series production models, yet the reports and denials put competing rumors and powerplants in play. Aston Martin installs a 5.2-liter V12 in the DBS Superleggera, and Autocar suspects an inline-six could be derived from that engine. The automaker already has a six-cylinder in development, though, that being the turbocharged hybrid V6 said to be headed to the Ferrari- and McLaren-fighting Valhalla. Creating two new six-cylinder engines in different formats seems an odd choice for a tiny manufacturer. What about the rumors that say the DBX crossover could get a six-cylinder? In July, when Motoring asked chief creative officer Marek Reichman about it, he said the DBX "could [use a Mercedes-sourced six-cylinder], because that would be a pretty good engine and combination. Potentially." Autocar suggests, however, that the DBX will be first in line for the in-house inline engine. Aston Martin has a storied history with the inline-six, all of them with links to other automakers. The legendary inline-six in the original DB cars of the mid-20th century were originally drawn up by Walter Owen Bentley - yes, that W.O.