2022 Aston Martin Dbx 4dr Awd on 2040-cars

Auto blog

Aston Martin Victor is a one-off Q build inspired by the original V8 Vantage

Aston Martin’s Q division should be taken very seriously. It just turned out this stunning one-off custom model named the Aston Martin Victor. The Victor is based on a One-77, and itÂ’s the biggest project Q has ever taken on. Aston used the V8 Vantage of the 1970s and 1980s as the design inspiration for the Victor, making it look like a resto-mod Aston Martin. We dig it, a lot. The styling is massively different than a One-77 from front to back, as Aston has gone over every surface of this car. Our favorite highlights include the round headlights, Vulcan-inspired taillights, and boattail rear with its massive, upturned spoiler. It walks the Aston line of being beautiful and aggressive at the same time, with the emphasis on aggression in this build. The paint is called Pentland Green, and itÂ’s complemented by a whole lot of satin carbon fiber. The carbon-fiber monocoque chassis is adapted from the One-77. However, the new carbon-fiber body weighs less than that of the original One-77. Under the sculpted hood sits a 7.3-liter V12. ItÂ’s also from a One-77, but itÂ’s been heavily breathed upon by Cosworth. Output is bumped up to 836 horsepower and 606 pound-feet of torque, increases of 86 and 53 respectively. And then thereÂ’s the transmission. Aston converted it to a genuine three-pedal six-speed manual. The gearbox comes courtesy of Graziano. It requires new twin coolers to handle the heat and a motorsport clutch to handle the torque.  Shifting is done with a solid walnut knob, and itÂ’s simply beautiful. Forest Green “Conker Bridge of Weir” leather covers the cabin where you donÂ’t see exposed carbon fiber. Cashmere is used for the headliner, while anodized aluminum and polished titanium serve in concert with walnut wood for the interior trim. Yeah, it was probably extremely expensive. This car should handle spectacularly well, too. It uses the same inboard dampers and springs as the Vulcan, allowing for six settings of aggression. Aston says it was tuned to ride well on the street in addition to a racetrack — after all, it is road legal. Center-lock wheels are fitted, and six-piston Brembo brakes with carbon-ceramic rotors sit within them. Aston says it produces even more downforce than a Vantage GT4 racecar, so itÂ’s a serious track monster. We donÂ’t know how much it costs, but whoever commissioned the build is certainly extravagantly rich. Related video:

Aston Martin Project 003 is a road-going evolution of Valkyrie

The Aston Martin Project 003 will effectively be the most road-going example of Aston's mid-engined hypercars. It quite obviously draws heavily from the Valkyrie (aka Project 001), which is as much the result of aerodynamic requirements as it is maintaining a family resemblance. It may not appear to be as extreme in certain respects, and it isn't, but it does feature a number of advances. The 003 utilizes the next-generation of "aircraft morphing technology, to create a variable airfoil across the entirety of the rear wing. The technology named FlexFoil ... has been validated by NASA through extensive performance and acoustic flight testing, with Aston Martin the first to implement this cutting-edge aerospace technology in the automotive industry. The system allows for the car's downforce to be changed without changing the physical angle of the entire element." So yeah, fancy stuff, and in fact, the production version will feature an even further evolution of the technology. Aston hasn't released full details, but did indicate the 003 will be powered by a hybrid powertrain consisting of a new turbocharged V6 developed in-house. This is in contrast to the Mercedes-sourced engines in recent Aston Martins. It will feature a sealed oil system previously utilized in the Aston Martin Vulcan and in multiple 24-hour endurance races that allows for oil changes in 90 seconds and the refinement and reuse of the engine oil itself. The production 003 will be the first road-going car to receive this technology. There is plenty shared with Valkyrie, however, including the active suspension and various electronic systems. Aston says the chassis will be "blessed with next-level precision, control and driver connection for class-leading dynamics on road and truck." Also like the Valkyrie, Project 003 utilizes a lightweight carbon fiber structure with carbon fiber bodywork. It was shaped for maximum aerodynamic effect, which results in the two mid-engine hypercars sharing a common shape and general look. One noteworthy visual difference are the front and rear lighting units. Their lightweight technology are shared, however. Aston Martin says the 003's four lighting units weigh less than one DB11 headlamp. Inside is where the 003 most ventures away from the Valkyrie, and where it demonstrates its more road-going nature. Greater concessions have been made for usability and comfort, although that is certainly relative.

Aston Martin V12 Speedster DBR1 specification pays homage to a beautiful race car

Aston Martin debuted the limited-run V12 Speedster over a year ago, and today it’s introducing a special edition version of the roofless and windshield-less supercar. ItÂ’s called the DBR1 specification, as it takes after the DBR1 race car from the 1950s.  YouÂ’ll immediately see the resemblance between the two in the gorgeous photos above. The V12 Speedster is finished in the same Aston Martin Racing Green paint, and features the same Clubsport White pinstripe and roundels. A Satin Silver anodized finish is applied to the grille to match, and a Clubsport lipstick graphic caps off the front. You also get 21-inch center-lock wheels finished in a Satin Black paint — Aston says each Speedster in this spec spends over 50 hours in the painting process alone. YouÂ’ll get Conker saddle leather on the inside that is complemented by Viridian Green textile and Caithness leather. The interior also features glossy carbon fiber trim and satin silver brushed aluminum switchgear. Aston says this combo is its modern interpretation of the DBR1Â’s interior. And do remember that there is no roof — we have a feeling that you donÂ’t want this interior getting wet. In case you were curious as to why Aston Martin is using the DBR1 as inspiration here, you should know that the car has a rather commendable history in racing. It won the 1959 24 Hours of Le Mans, is a three-time winner of the 1,000-km of Nurburgring and also took the World Sportscar Championship the year it won Le Mans. On top of that, itÂ’s just flat-out gorgeous. “Creating a bespoke specification that nods to the glory of the DBR1 has been a huge privilege for my team and I, and I very much look forward to seeing these cars being driven with the same enthusiasm that we have applied to their design,” says Marek Reichman, Aston's chief creative officer. This DBR1 specification features the same vitals as the standard V12 Speedster. That means it has a 5.2-liter twin-turbo V12 under its hood that makes 700 horsepower and 555 pound-feet of torque. ItÂ’ll do 0-60 mph in 3.4 seconds on its way to a 198 mph top speed. Have fun doing that without a windshield. Aston says you can order a V12 Speedster in this spec now and expect delivery in mid-2021. No price for the DBR1 was given, but the car starts at about $950,000. We suspect this one is a good bit more, likely arcing past the $1 million mark. Related video: