1986 Alfa Romeo Spider Quadrifoglio on 2040-cars

Auto blog

Vintage 1921 Alfa Romeo G1 rally car hits RM Sotheby’s

The only known surviving, fully operational example of Alfa Romeo's first commercial car is hitting the auction block at RM Sotheby's at its auction in Phoenix next month, when the 1921 G1 is expected to fetch up to $1.5 million. It's one of only 52 examples, including two prototypes, built between 1921 and 1923, and the only known surviving member of the series, stamped chassis No. 6018. It spent many years on a remote farm in Australia, during part of which the engine was put to work powering a water pump, before undergoing a restoration sometime in the mid-1960s. The G1 is powered by a 6.3-liter side-valve inline six that was said to have been designed with input from Enzo Ferrari, then a driver for the company, and was the largest motor ever fitted to an Alfa. It was based on two cast-iron three-cylinder blocks with fixed cylinder heads, a cylinder bore of 98 millimeters and a stroke of 140 mm to make 71 horsepower and 216 pound-feet of torque, with a top speed of 86 mph. It has a four-speed manual gearbox, which sends power to the rear axle through a single-dry plate clutch and an open driveshaft. The G1 was built to support Alfa Romeo's racing activities and was marketed to the same upscale clientele as Rolls-Royce, Hispano Suiza and others. A stripped-down version of the car won its production class at the Coppa del Garda, according to RM Sotheby's, but the production version suffered for being an expensive fuel guzzler at a time of economic and political chaos in Italy following World War I. So the company exported all 50 production versions to Australia (and possibly to South Africa), where this one was picked up by a Queensland businessman, who later went into bankruptcy and sent the car to a farm in the Outback to hide it from creditors. Ranch workers reportedly found it in the late '40s and used it as a farm runabout before the rear axle failed and the engine was used for the water pump. The remains of the G1 were acquired by a man named Ross Flewell-Smith, who would restore it over 10 years, including finding authentic replacement parts. It would undergo three full restorations in subsequent years.Related Video:

Alfa Romeo 4C will be refreshed for the 2019 model year

Alfa Romeo Chief Technical Officer Roberto Fedeli said at a launch event for the Stelvio Quadrifoglio that an updated version of the 4C is coming next year as a 2019 model. "We are coming back to Formula 1," he said, "and we need the 4C to be our halo car," Fedeli told Autocar. But don't expect to see the refresh bring with it a manual transmission. No future high-performance models from Alfa, Maserati, or even Ferrari will be getting clutch pedals anytime soon, a decision reportedly made after Ferrari spent 10 million euros developing a manual gearbox for the California a few years back only to see exactly two customers choose the option over an automatic. We'd hazard a guess that Alfa will tone down its carbon-fiber 4C for the next generation. As fun as the little sportscar is on a race track, it's equally jarring to drive on regular roads. A revised suspension and perhaps power steering may be on the menu. Related Video:

Alfa Romeo Giulia SWB Zagato revealed as a glorious green one-off coupe

Christmas came a few days early for one lucky enthusiast in Germany. Italian design house Zagato unveiled a one-off, carbon fiber-bodied coupe called Alfa Romeo Giulia SWB Zagato that features a twin-turbocharged V6 and that was commissioned by a German collector. Zagato explained that it launched the project to celebrate 100 years of collaborating with Alfa Romeo, the current-generation Giulia and the V6 engine. It started by shortening the Giorgio platform that the Giulia and Stelvio are both built on. It then drew a head-turning coupe that borrows a handful of styling cues from several past and present Alfa models. The front end is dominated by air intakes (including one shaped like the Alfa grille) and it features a pair of Tonale-like LED headlights. The coupe's profile is characterized by a long hood, a short rear end and a carbon fiber double-bubble roof panel left unpainted, while the back end gets a thin, curved light bar and a massive air diffuser. While several cars inspired designers, including the 1989 SZ that Zagato helped design, the Giulia SWB isn't full-on retro or old-school in any way. It features carbon fiber body panels and it's powered by an evolution of the 2.9-liter, twin-turbocharged V6 engine fitted to the Giulia Quadrifoglio that's been updated to GTAm specifications. Technical specifications weren't released, but the GTAm's six is tuned to develop 540 horsepower and 442 pound-feet of torque. Starting with the Quadrifoglio's engine gave Zagato a big advantage: the V6 spins the rear wheels via a six-speed manual transmission. The limited-edition GTAm is exclusively offered with an eight-speed automatic transmission. From the driver's perspective, the cabin is mostly standard Giulia fare; you'll find the same steering wheel, touchscreen, air vents and climate control interface in the same locations as in the Giulia. Green accents and several model-specific carbon fiber trim pieces help the SWB stand out from the sedan it's based on, and a major difference between the two cars is that the coupe is fitted with only two seats.  Zagato delivered the Giulia SWB to its new owner after shooting the photos you see in our gallery on the La Pista race track located near Alfa Romeo's hometown of Milan, Italy. There's no word on who owns it yet; all we know is that the coupe will join what sounds like a massive collection of high-end cars that includes an 8C Competizione, a 1990 SZ, plus a handful of Zagato-bodied Aston Martin models.