Auto blog

2015 Alfa Romeo 4C Spider doffs its cap in Detroit

With the debut of the 2015 Alfa Romeo 4C Spider the Italian company's US lineup has officially doubled. Cosmetically, it makes most of its changes up top and out back, starting with its exposure to the sky. The 4C's 236-pound carbon-fiber monocoque was already engineered for open-air duty, so the Spider only needs an aluminum rollbar underneath the CF roll hoop - called a "halo" - as well as some new upper body brackets and a crossbeam in the engine compartment to maintain stiffness. The CF windshield frame is both bolted and glued to the monocoque. When it's time to close the cabin off, a stowable cloth roof or, later after launch, an available carbon-fiber hardtop will do the job. We've already had the chance to affix and remove the former, and it's a simple job that's good for a full 160 mph, unlike some rival's similar toupees that aren't approved for top-speed runs. When we saw spy shots of the 4C Spider on a photo shoot recently, we thought the center-mounted exhaust from the concept car had been retired, but that's not the case. Buyers will have the option of a center-set Akrapovic titanium dual-mode exhaust, with a carbon-fiber body surround. The aural sensations will be boosted further with three air extractors in the new decklid. The cockpit comes standard with cross-stitched leather in either black, red or Tobacco, depending on package. Details include CF vent surrounds, and an Alpine stereo with plenty of media input options (we're hoping it's better than the absolutely terrible head unit we've already experienced in the 4C coupe). Exterior touches will be enhanced by four new wheel designs in silver or dark finish, with four choices of brake caliper. How much performance will you give up to go topless? It doesn't look like much, if any. The 4C Coupe has been run from standstill to 60 miles per hour anywhere from 4.1 seconds to 4.3 seconds. Alfa gives the estimated time for the Spider as 4.1-seconds, to go along with 1.1 g of lateral acceleration, and says the car only weighs 22 pounds more than its fixed-head sibling. It looks like the Spider is out to earn all the attention it's going to get when it launches this summer. You can turn your attentions now to the mega gallery above and the lengthy press release below, and we'll have live shots of it from the Detroit Auto Show shortly.

Alfa Romeo to develop a large car in the United States

MILAN — Itay's Alfa Romeo will work on a new large car in the United States to be launched in 2027, the brand's head Jean-Philippe Imparato said on Friday, adding however the group had not yet decided where to manufacture it. Imparato said the step was key to tailoring the design for overseas markets, helping Alfa Romeo to strengthen its position as an international premium brand of carmaker Stellantis. "Our offer for a large size vehicle must fit international markets, American, Chinese, European," he said during a media call, a day after parent Stellantis released first half results. Alfa Romeo is still assessing whether the new model will be an SUV or crossover bigger though it already has Stelvio with Tonale on the way, or a sedan bigger than Giulia, but it will probably not be an SUV as large as BMW's X5 or X6, Imparato said. He told Automotive News that the vehicle could be a mix of the two vehicle types, perhaps not unlike the new Toyota Crown. "We want to find the right mix," he said. "It's a decision we will take by the end of this year." Imparato said developing the car in the U.S. did not mean it would be produced in North America. "Producing in the U.S. is not something we have decided and it is something we don't want to decide now," he added. Alfa's two production sites are in Italy.  

The Effeffe Berlinetta is a brand new 1960s Italian GT

You're looking at a brand new car, not one that has spent 50 years under a tarp in some barn in the Italian countryside. The vintage-looking Berlinetta, dreamed up by the brothers Frigorio, has been in the works for a number of years now. It was initially unveiled at the Concorso d'Eleganza Villa d'Este two years ago, and the official introduction will be held at the Top Marques show in Monaco next week. As it stands, it offers a fascinating glimpse into the way sports cars used to be built, with virtually nothing to let a casual observer know that it's factory fresh. The drivetrain on the two-seater Berlinetta is classic Italian, using a front-mid-mounted Alfa Romeo Twin Cam four-cylinder, which originally dates back to 1971 in design. Naturally, the two-liter unit is coupled to a five-speed manual gearbox, and the two Weber DCOE carburetors finish off the power figures at 180 horsepower at 6,500 rpm. The car follows classic Alfa Romeo lines, but isn't a direct replica, rather a tribute to Italian GT car building half a century ago – the chassis is a handmade tubular spaceframe and the entire Berlinetta will weigh less than 1,760 lbs. There are disc brakes front and rear, and while the front suspension is independent, the rear relies on a solid live axle complete with a Watt's linkage setup. And – of course – it sits on wire wheels with center knock-off lugs. As for the interior, it will all be custom-made and tailored to the buyer's taste, and each car will be unique. The full Matteograssi leather interior includes a matching luggage set, too, and the driver will be holding a wooden Nardi steering wheel. What kind of price would you expect for something like this? The Frigerio brothers have priced their small-series creation at nearly $320,000. That includes some track time to get to grips with one's new 1960s sportscar, and the chassis settings will be fine-tuned to one's personal preferences. There are plans to widen the portfolio with another model, and we're hoping that will be a drop-top Spider made in the same style. Related Video: Featured Gallery Effeffe Berlinetta View 9 Photos Alfa Romeo Automakers Coupe Special and Limited Editions Classics top marques monaco